miroir L710S Pro 1080p Smart LCD Projector User Guide
- August 28, 2024
- Miroir
Table of Contents
- miroir L710S Pro 1080p Smart LCD Projector
- Specifications
- FAQ
- Your Miroir Wireless Projector with SYNQ TV
- Included in the Box
- Remote Control
- Quick Start
- Projection Distance and Size
- Input Source
- Bluetooth Settings
- Projection Settings
- WIFI Connection and Screen Mirroring
- SCREEN MIRRORING
- Android CAST (For Android Systems)
- Ceiling Installation
- Specification
- Troubleshooting
- Miroir Safety and Warranty Information
- FCC INFORMATION
- ONE (1) YEAR LIMITED WARRANTY USA & Canada Only
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
miroir L710S Pro 1080p Smart LCD Projector
Specifications
- Model: L710S Pro
- Resolution: 1080p
- Display Technology: LCD
- Wireless Connectivity: Yes
- Input Ports: HDMI, USB
- Additional Features: SYNQ TV, Bluetooth, Autofocus
FAQ
Q: How can I adjust the focus of the projector?
A: Rotate the focus ring on the lens to achieve a clear image projection.
Q: How do I connect my iOS device for screen mirroring?
A: Follow the instructions under SCREEN MIRRORING IOS CAST in the manual for iOS devices.
Q: What should I do if there is no Wi-Fi connection available for screen mirroring?
A: Open a hotspot on your iOS or Android device and connect the projector to it for screen mirroring functionality.
Your Miroir Wireless Projector with SYNQ TV
Included in the Box
Learn More
To learn more about your Miroir drivvplay and its operations, to review specs,
and find answers to frequently asked questions, please visit:
www.miroirusa.com/L710SPro
Remote Control
BATTERIES STATEMENT AND NOTICES
Remove the battery compartment cover on the back of your remote by carefully
sliding to open.
The battery cover can then be lifted away. Fit the correct batteries,
referring to the polarity markings. Finally, replace the cover.
- Batteries shall not be exposed to excessive heat such as sunshine, fire.
- Make sure that the batteries are installed with correct polarity.
- Only same or equivalent type batteries as recommend are to be used.
- Do not dispose of batteries in fire, battery may explode or leak. Do not try to recharge a battery.
- Do not mix old and new batteries.
- Do not mix alkaline, standard(carbon-zinc), or rechargeable (ni-cad,ni-mh,etc) batteries.
Quick Start
Tips:
- To prolong the lifespan of the projector, we highly recommended unplug the power cable completely after each use, especially during a long time of no use.
- After the projector is plugged into the power supply, it takes 10 seconds for the system to detect power on, so please wait for 10 seconds before pressing power to turn it on.
- The bottom of the machine is the air inlet, please do not place the machine on items such as towels.
Projection Distance and Size
The recommended projection screen is around 100-120 inches with a distance of
around 9.7-11.5ft.
To improve the clarity of your projected images, it is recommended to create
ambient darkness and use a high-quality project screen. These factors work
together to provide a visually stunning and immersive viewing experience.
PROJECTION MODE
- If you want to hang the projector to the ceiling, a projector mount will be needed.
- If you want to project in different way, please select corresponding mode in the setting page.
Input Source
Press on the remote to enter the interface of the Input Source.
A. HDMI Connection
B. USB Connection
Bluetooth Settings
A. Blutooth Setting
- Go to
- Turn the Bluetooth Connection on and search for nearby Bluetooth devices.
- Choose correct Bluetooth device to connect.
NOTE
- Due to compatibility issues with the Bluetooth protocol, some brands of Bluetooth speakers may not support connection to our projectors. If you have such an issue, feel free to let us know.
- If you want to connect your headphone/ speaker to an audio port, please disconnect the Bluetooth audio device from the projector first.
B. Bluetooth Remote Control
- Go to Setup Bluetooth Settings >
- Place the remote control clost to the projector, press and hold the “LEFT” and “RIGHT” on the remote control until indicator light flashes quickly and show up “BT- Remote Control” and choose “BT-Remote Control”, enter OK button.
- After being connected, the operation of the remote control will be more sensitive and the coverage will be wider.
Two Working Modes of Remote:
- The Bluetooth control: rare in the market, once connect the remote control to the projector via Bluetooth, it’s no longer limited by the sensing area, which is more sensitive and convenient to use. (Recommend)
- Common IR sensing: need to point at the IR window of the projector and operate within the IR sensing range.
Note
- After the Bluetooth remote control is connected, the other Bluetooth audio devices can also be connected without conflict.
- Please keep the projector’s Bluetooth ON to ensure the Bluetooth remote can connect and work as normal.
C. As A Bluetooth Speaker
Press button on remote control, select and the projector can be used as a
Bluetooth speaker.
Projection Settings
A. Auto Focus
By default, the auto focus mode of the projector is enabled, allowing it to
quickly detect and adjust to the optimal clarity of the screen when it is
turned on.
NOTE
- • Go to you can turn off/on the autofocus function.
2 Even after the projector has completed its autofocus, you can still manually focus to refine the picture clarity to your preferences. This gives you complete control over the image quality, ensuring that it meets your exact standards.
B. Manual Focus
- Press – button and + button to adjust the picture clarity.
C. Manual Keystone
- Go to
- Choose
- Press Direction Buttons to adjust the position, Press “OK” button to jump to the next corner adjustment, and when the circle in the center is a perfect circle, the screen ratio conforms to the system settings.
D. Digital Zoom
- Go to
- Choose
- Press Down button v to Zoom out (100%-50%) and Up button ^ to Zoom in(50%-100%).
WIFI Connection and Screen Mirroring
WIFI CONNECTION
- Go to
- Turn the WifI and search the WiFI list by “Add WIFI”
- Select your WIFI then enter password to connect
NOTE:
If you need screen mirroring, the speed of your home network is directly
related to the smoothness of video play. Please make sure that the network is
good to have a smoother playback.
SCREEN MIRRORING
IOS CAST (For IOS System)
- Go to Homepage > Screen Mirroring > IOS Cast to show the below page
- On your iOS open control center and tap Screen Mirroring
- Looking for device that can mirrored on
- Select L710S from the list to connect
NOTE: Please make sure the projector and your iOS device are connected to the
same Wi-Fi.
If there is no Wi-Fi, please open a hotspot on your iOS device and connect the
projector to it.
Android CAST (For Android Systems)
- Go to Homepage > Screen Mirroring > Android Cast to show the below page
- On your Android device launch the Multi-screen/Wireless Display/Screen Mirroring/ Smart View Function.
- Looking for the device that can be mirrored on
- Select L710S from the list to connect
NOTE
- Please remember to open the Wi-Fi function on your Android device. But not necessary to connect to any Wi-Fi router.
- When you If there is no Wi-Fi, please open a hotspot on your iOS device and connect the projector to it.
Ceiling Installation
How to Mount a Projector on the Ceiling?
Mounting a projector on the ceiling is a great way to make your home theater
or presentation space look professional and save valuable floor space. Follow
these steps to mount your projector securely.
Note: None of the above tools are included in the accessories, and you need to purchase a ceiling mounting bracket separately.
-
Step 1: Determine the position of your projector to the screen
Position your projector and screen so that the throw distance is sufficient for your needs. The lens should be between the upper third and upper half of the screen for optimal picture clarity. Mark the position with a pencil.
Note: Ensure there are no obstructions blocking the projector’s beam, and that there is an available power socket nearby. -
Step 2: Attach the mount to the projector
Flip the projector upside down and attach the mounting bracket according to the instructions included with the mount. -
Step 3: Attach the mount and projector to the ceiling
Ensure the mounting bracket can attach along a ceiling joist, then make marks for screw holes and drill preliminary holes. Use suitable screws to securely fasten the bracket to the ceiling. Check that it is securely fastened to the ceiling by trying to wiggle it around.
Step 4: Aligning the projector
Adjust the zoom, focus, pitch, and yaw of the projector as necessary to ensure a properly aligned image with the screen.
Step 5: Connect Power
Please plug in the power cord to both the projector and a nearby power outlet. Once the connection is confirmed, turn on the projector to test the connection. -
Step 6: Final adjustments
Make any final adjustments to the image and lock down the mount to prevent movement.
By following these steps, you can create a stunning and functional projection system.
Specification
Display Technology | LCD |
---|---|
Light Source | LED |
Resolution | I0S0P |
Input Signal | HDMI / USB |
Aspect Ratio | 16:9 |
Focus | AUTO/Manual |
Keystone | AUTO+ 4P/4D + Manual |
Speaker | 2’5W |
Bluetooth | Version 5.0 |
Power Input | I00-240V |
Power Output | 95W |
Photo Format Supported | JPEG/PNG/BMP/GIF |
Audio Format Supported
| mp3/wov/osf/wmv/divx/mkv/3gp/mp4/mov/m4o/ts/trp tp/mpeg/mpg/vob/dot/mko/eoc3/webm/oc4/mts/m2ts
Video Format Supported
| mkv/webm/mp4/mov/3gp/ts/trp/tp/mpeg/mpg/vob dot/osf/wmv
Operating Temperature| 0°c – 3s0c / 32°F – 100A°F
Storage Temperature| -20°C – 45°C I -4°F -113°F
Temperature Protection| Over S0°C temp auto-shutdown
Ports| HDMI / USB / 3.5mm Audio
Unit Dimension| cm
Troubleshooting
-
Remote control not work?
- Make sure the batteries are effective and installed in the correct way.
- Make sure the remote control has connected to Bluetooth.
-
Blurry Image?
- Manual focus to get the best image.
- The quality of the projection screen will also affect the image quality.
- Recommended to use it on a white wall or a better-quality screen. Not suggest to use it on a thin white gauze screen, which will reduce the image quality.
-
No Sound?
The mute button on the remote was be pressed accidentally. -
Automatic shut-down?
- Overheating protection. Please use in a ventilated environment.
- The bottom of the projector is the air inlet, please do not block the air inlet on the bottom of the projector.
- It is recommended to unplug the power supply after use to prolong the service life.
-
Upside down image?
Please enter “Projection Mode” to select the corresponding mode. -
Video can not be mirrored or cast?
- Due to copyright restrictions, some videos cannot be mirrored or projected.
- The cast function only supports the built-in APP application of the projector.
-
Black spot on the screen?
Wipe the lens with dry and clean cloth to remove dust on the lens. -
Missing accessories?
If the device is damaged or any accessories missing, please contact Miroir Support at www.miroirusa.com
Miroir Safety and Warranty Information
SAVE THESE INSTRUCTIONS!
IMPORTANT SAFETY INSTRUCTIONS All of the safety and operating instructions
should be read, adhered to and followed before the unit is operated.
CAUTIONS
- TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE
- TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the unit’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock
A Presence of important operating and maintenance (servicing) i structions in
the titera accompanying the unit.
DANGER
To reduce the risk of electric shock, burns, fire or injury:
- Do not use while bathing or in a shower.
- Do not place or store unit where it can fall or be pulled into a tub or sink.
- Do not place in, drop or submerge in water or other liquid.
- Do not reach for unit that has fallen into water. Unplug it immediately.
- Care should be taken so that objects do not fall and liquids are not s pilled onto the unit.
WARNING
- Close supervision is necessary when this appliance/product is used by or near children or mentally disabled individuals.
- Use this unit only for its intended use as described in this manual.
- Unplug this unit during lightning storms or when unused for long periods of time.
- Never drop or insert an object into any opening.
- Protect the adapter cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit.
- Do not allow adapter cord to touch hot surfaces. Wrap cord loosely around the unit when storing.
- The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat.
- Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked.
- Do not overload electrical outlet. Use only the power source as indicated.
- Do not carry this unit by cord or use cord as handle.
- Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit’s power supply cord or plug is damaged, do not attempt to fix it yourself.
- To avoid the rick of electric shock do not disassemble or attempt to repair the unit
FCC INFORMATION
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and2) This device must accept any interference received including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 8 inches from nearby persons.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.
Caution: The radiated output power of the Wi-Fi technology is below the
FCC radio frequency exposure limits. Nevertheless, it is advised to use the
wireless equipment in such a manner that the potential for human contact
during normal operation is minimized.
ONE (1) YEAR LIMITED WARRANTY USA & Canada Only
- Miroir (“Miroir”) warrants to you, the original retail purchaser (“Consumer”), that this product (“Product”) will under normal use operate substantially in accordance with the accompanying documentation for a period of one (1) year from date of original purchase. Consumer’s sole and exclusive remedy, and Miroir’s sole and exclusive responsibility under this warranty will be, at Miroir’s option, either to repair or replace the defective Product during the one (1) year limited warranty period so that it performs substantially in accordance with the accompanying documentation on the date of your initial purchase.
- The forgoing warranty is limited and is not applicable to:
- (i) normal wear and tear;
- (ii) defects or damage caused by misuse, accident (including without limitation collision, fire and the spillage of food or liquid), neglect, abuse, alteration, unusual stress, modification, improper or unauthorized repair, installation, wiring, or testing, improper storage, use in an unapproved device or if the serial number has been removed;
- (iii) use not in accordance with the documentation; and
- (iv) damage caused by the equipment with which the Product is used
- To obtain warranty service for any Product that is subject to the foregoing warranty, Consumer must contact Miroir, provide proof of purchase and a description of the issue. Consumer shall bear the cost of returning the Product for repair or replacement under this limited warranty. Any Product returned without proof of purchase will not be honored under this limited warranty.
- The limited warranty extends only to Consumer and is not assignable or transferable to any subsequent purchaser or user. THE LIMITED WARRANTY SET FORTH ABOVE IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES AND MIROIR HEREBY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR PURPOSE, NON-INFRINGEMENT, QUALITY AND TITLE. MIROIR DOES NOT WARRANT THAT THE PRODUCT IS ERROR FREE OR THAT IT WILL FUNCTION WITHOUT INTERRUPTION.
- To the extent Miroir may not, as a matter of applicable law, disclaim certain implied warranties, the duration of any such implied warranty shall be limited to the shorter of the one (1) year limited warranty period or the minimum time period permitted under such law. Some states do not allow limitations on the duration of implied warranties, so the above limitation may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
- IN NO EVENT WILL MIROIR BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUES, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF ANY REPLACEMENT GOODS OR SUBSTITUTE EQUIPMENT, LOSS OF USE, CLAIMS OF ANY THIRD PARTIES, OR ANY OTHER DAMAGES ARISING FROM MIROIR’S BREACH OF THIS LIMITED WARRANTY OR THE USE OF THE PRODUCT, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT,TORT (INCLUDING NEGLIGENCE) OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF MIROIR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL MIROIR’S TOTAL CUMULATIVE LIABILITY EXCEED THE PRICE PAID BY CONSUMER FOR THE PRODUCT.
- Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. If you have any questions concerning this statement of limited warranty please email Miroir at miroirusa.com for any more questions.
One (1) Year Limited Warranty European Union (EU)
-
Miroir (“Miroir”) warrants to you, the original retail purchaser (“Consumer”), that this product (“Product”) will under normal use operate substantially in accordance with the accompanying documentation for a period of one (1) years from date of original purchase. Consumer’s sole and exclusive remedy, and Miroir’s sole and exclusive responsibility under this warranty will be, at Miroir’s option, either to repair or replace the defective Product during the one (1) years limited warranty period so that it performs substantially in accordance with the accompanying documentation on the date of your initial purchase.
-
The forgoing warranty is limited and is not applicable to:
-
(i) normal wear and tear;
-
(ii) defects or damage caused by misuse, accident (including without limitation collision,fire and the spillage of food or liquid), neglect, abuse, alteration, unusual stress, modification, improper or unauthorized repair, installation,
wiring, or testing, improper storage, use in an unapproved device or if the serial number has been removed; -
(ili) use not in accordance with the documentation;
and (iv) damage caused by the equipment with which the Product is used
-
-
To obtain warranty service for any Product that is subject to the foregoing warranty, Consumer must contact Miroir, provide proof of purchase and a description of the issue. Consumer shall bear the cost of returning the Product for repair or replacement under this limited warranty. Any Product returned without proof of purchase will not be honored under this limited warranty.
-
The limited warranty extends only to Consumer and is not assignable or transferable to any subsequent purchaser or user. THE LIMITED WARRANTY SET FORTH ABOVE IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES AND MIROIR HEREBY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR PURPOSE, NON-INFRINGEMENT, QUALITY AND TITLE. MIROIR DOES NOT WARRANT THAT THE PRODUCT IS ERROR-FREE OR THAT IT WILL FUNCTION WITHOUT INTERRUPTION.
-
To the extent Miroir may not, as a matter of applicable law, disclaim certain implied warranties, the duration of any such implied warranty shall be limited to the shorter of the one (1) years limited warranty period or the minimum time period permitted under such law.
-
N NO EVENT WILL MIROIR BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUES, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF ANY REPLACEMENT GOODS OR SUBSTITUTE EQUIPMENT, LOSS OF USE, CLAIMS OF ANY THIRD PARTIES, OR ANY OTHER DAMAGES ARISING FROM MIROIR’S BREACH OF THIS LIMITED WARRANTY OR THE USE OF THE PRODUCT, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT,TORT (INCLUDING NEGLIGENCE) OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF MIROIR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL MIROIR’S TOTAL CUMULATIVE LIABILITY EXCEED THE PRICE PAID BY CONSUMER FOR THE PRODUCT.
-
If you have any questions concerning this statement of limited warranty please email Miroir at miroirusa.com for any more questions.
www.miroirusa.com
L710SPRO.06.2024
© 2024 Miroir USA, LLC. All rights reserved. Miroir and the Miroir Logo are
owned by Miroir USA, LLC.
All other trademarks are the property of their respective owners. Miroir USA,
LLC assumes no responsibility for any errors that may appear in this manual.
Information contained herein is subject to change without notice.
References
- Miroir Portable Projectors | Free Shipping | Official USA Store
- Miroir Portable Projectors | Free Shipping | Official USA Store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>