intelligent AP3-05 Aqua Point 3 Unvented Water Heater User Guide

: August 27, 2024
: Intelligent

Table of Contents

AP3-05 Aqua Point 3 Unvented Water Heater
Product Information
Specifications:
Features and Benefits:
Approvals:
Plumbing:
Product Usage Instructions
Installation:
Temperature Control:
Maintenance:
Frequently Asked Questions (FAQ)
Q: Can the Aquapoint 3 be used for single or multiple
Q: What is the capacity of the AP3/10 model?
Q: How do I adjust the water temperature?

AP3-05 Aqua Point 3 Unvented Water Heater

“`html

Product Information

Specifications:

Model: AP3/10
Energy Efficiency Class (ERP): A
Dimensions (W x D x H): 350mm x 265mm x
480mm
Nominal Power Rating: 2 kW @ 230V AC
Re-heat Time: 00:20
Capacity: 9.9 Litres

Features and Benefits:

Glass lined steel inner container
Tested to 13 bar
Sacrificial anode for protection against corrosion
WRAS approval and CE endorsed
High performance foam insulation
External temperature control that can be replaced without
draining

Approvals:

WRAS approval and CE endorsed

Plumbing:

Wholesome water supply: Yes
Wholesome connection size: 1/2BSP
Minimum supply water pressure: 0.1bar
Maximum supply water pressure: 5.5bar

Product Usage Instructions

Installation:

The Zip Aquapoint can be installed either over-sink or
under-sink to suit your needs. Make sure to follow the installation
guidelines provided in the user manual.

Temperature Control:

To adjust the water temperature, use the external temperature
control feature. This allows you to set the desired temperature
without the need to drain the unit.

Maintenance:

Regular maintenance is important for the longevity of the water
heater. Check the sacrificial anode periodically and replace it if
necessary to prevent corrosion.

Frequently Asked Questions (FAQ)

Q: Can the Aquapoint 3 be used for single or multiple

outlets?

A: Yes, the Aquapoint 3 is suitable for both single and multiple
outlets.

Q: What is the capacity of the AP3/10 model?

A: The AP3/10 model has a capacity of 9.9 litres.

Q: How do I adjust the water temperature?

A: Use the external temperature control feature to adjust the
water temperature to your desired level.

“`

SPEC SHEET – AP3/10
Zip Aquapoint
This unvented water heater range comes in a variety of capacities and offers over-sink or under-sink installation. Suitable for single or multiple outlets, Aquapoint 3 is glasslined and features external temperature control and frost protection.

MODEL AP3/10

ENERGY EFFICIENCY CLASS (ERP)

*DIMENSIONS W X D X H

NOMINAL POWER RATING KW

A

350mm x 265mm x 480mm

2 kW @ 230V AC

RE-HEAT TIME (HH:MM) 00:20

Features and benefits
Glass lined steel inner container
Tested to 13 bar
Sacrificial anode
For protection against corrosion
Approvals
WRAS approval and CE endorsed

Insulation
High performance foam
External temperature control
Can be replaced without draining

CAPACITY (LITRES)
9.9

Specification sheet Aquapoint

Technical Support Tel. 0345 6 005 005 Email: service@zipwater.co.uk specify.zipwater.co.uk

Product detail
Specification type Product code Product name Energy Efficiency Class WRAS Approval
Capacity, weights & dimensions Capacity (Litres) Unit dimensions (W x D x H) mm Empty weight Filled weight

AP3/10 Aquapoint 3 Unvented 10 Litre Underbasin A Yes
9.9 L 350 x 265 x 480 8.5kg 18.5kg

Electrical Nominal power rating Nominal power supply Nominal rated current IP rating

2 kW @ 230V AC 230V 8.7 amps 24

Plumbing

Wholesome water supply

Yes

Wholesome connection size

1/2″BSP

Mininum supply water pressure

0.1bar

Maximum supply water pressure

5.5bar

The minimum water pressure will vary if a limescale filter is installed. Please contact us to discuss your requirements.

The Zip Aquapoint III must be installed in accordance with the installation instructions and all current legislation, codes of practice and regulations governing the installation of unvented hot water cylinders in force at the time of installation. The appliance must be permanently connected to the supply through an isolating switch with a contact separation of at least 3mm in all poles and be protected by a suitably rated RCD to protect the appliance, an MCB (miniature circuit breaker) or fuse must be fitted with a rating suitable for the nominal current of the appliance.

Specification sheet Aquapoint

Technical Support Tel. 0345 6 005 005 Email: service@zipwater.co.uk specify.zipwater.co.uk

Energy Certificate

Specification sheet Aquapoint
Powered by TCPDF (www.tcpdf.org)

Technical Support Tel. 0345 6 005 005 Email: service@zipwater.co.uk specify.zipwater.co.uk