Shanghai Jianrong Intelligent Information Technology Co Ltd D5 Data Collector User Guide
Table of Contents
Shanghai Jianrong Intelligent Information Technology Co Ltd D5 Data
Collector
Specifications:
- Model: D5
- Key Description: Power Key, Direction Key (up, Down, Left, Right), Return Key, APP Key, FN Key, Aa Key
- Battery: Lithium-ion rechargeable battery
- SIM Card: Nano SIM/UIM card compatible
- Memory Card: Micro SD card support
- Charging: Travel charger or USB cable
- FCC Compliance: Part 15 of the FCC Rules
- SAR: Specific Absorption Rate information compliant
Product Usage Instructions
1. Appearance Description:
The device features various keys for different functions:
- Power Key: Hold down for 3 seconds to turn on/off. Hold down for 10 seconds to reset.
- Direction Key: Used for navigating up, down, left, and right.
- Return Key: Returns to the previous screen or main screen.
- APP Key: Program-associated shortcuts.
- FN Key: Custom function keys can be set using software.
- Aa Key: Case switch key.
2. Battery Charging:
To charge the device:
- Using Travel Charger: Insert the small end of the USB cable into the device’s TYPE-C connector and the big end into the travel charging plug. Plug the travel charging plug into a power socket for charging.
- Charging with USB Cable: Plug the small end of the USB cable into the device’s TYPE-C connector and the big end into a computer’s USB port for charging.
3. Installing SIM Card and Memory Card:
To install cards:
- SIM Card: Push the Nano SIM card metal contacts into the slot following the chamfering direction.
- Memory Card: Push the Micro SD memory card contacts into the slot following the chamfering direction.
Frequently Asked Questions
- Q: Is the D5 device compatible with all SIM card sizes?
- A: The D5 device uses a Nano SIM/UIM card. Ensure you use the correct size for compatibility.
- Q: How do I reset the device if needed?
- A: Hold down the Power Key for 10 seconds to perform a reset on the device.
- Q: Can I charge the device with any USB cable?
- A: Yes, you can charge the device using a USB cable by plugging it into a computer’s USB port.
Appearance description
KEY DESCRIPTION
- Power Key: Hold down for 3 seconds to turn on/off. Hold down for 10 seconds to reset.
- Direction Key: up, Down, Left And Right
- Return Key: Return to the previous screen or return to the main screen
- APP Key： program Associated Shortcuts
- FN Key： Custom function keys can be set by software
- Aa Key： Case Switch, Press
battery charge
Use the travel charger Insert the small end plug of the USB cable into the host TYPE-C connector，insert the big end plug of the USB cable into the travel charging plug, and then plug the travel charging plug into the power socket for charging. Charging with a USB cable Plug the small end plug of the USB cable into the host TYPE-C connector and plug the big end plug into the computer’s USB port for charging.
Install SIM card, memory card
This product uses a Nano SIM/UIM card. Push the Nano SIM card metal contacts
all the way down into the slot, paying attention to the chamfering direction.
Push the metal contacts of the Micro SD memory card down into the slot, paying
attention to the chamfering direction
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction. Specific Absorption Rate (SAR) information: This D5 meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
- This radio is designed for and classified as “General population/uncontrolled Use”, the guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.The exposure standard for wireless radio employs a unit of measurement known as the Specific Absorption Rate, or SAR, the SAR limit set 1.6W/kg.
- Body-worn operation; this device was tested for typical body-worn operations with the back of the handset kept 10mm for body worn. To maintain compliance with RF exposure requirements, use accessories that maintain a 10mm for body worn. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.
- The highest reported SAR value for worn on the body is 0.785 W/kg, Simultaneous Reported SAR 1.372W/kg. .