Shanghai Magii Intelligent Technology Co Ltd G1 Japanese Box Battle User Manual
- June 1, 2024
- Shanghai Magii Intelligent Technology Co Ltd
Table of Contents
Shanghai Magic Intelligent Technology Co Ltd G1 Japanese Box Battle
INSTRUCTIONS FOR USE
-
Connect Bluetooth: Confirm that both the Mug and the phone’s Bluetooth are turned on.
-
First, please open the Magic App and log in using a social account. Then, click on “Connect New Device” below and select the Magic Mug. After searching for MAGlI-G1, click on “Connect”.
-
The Bluetooth logo in the upper right corner of the app displays indicating the successful connection of the Mug. If grey is displayed, it indicates the connection was unsuccessful, please try again.
-
Local mode: In this mode, there is no need to constantly connect to the phone’s Bluetooth. After configuring the app for the first time, the cup only has a reminder function.
-
When using it for the first time, you need to turn on Bluetooth and use the Magic App to bind the Mug. After binding, click on the pattern to set when to drink or take medicine.
-
After saving, the alarm will automatically remind for 30 minutes when it arrives. Touch the key to turn it off.
Note : Local mode cannot use the Mug key to send and receive signals, and is suitable for users who do not have a mobile phone or have difficulty operating their phones. -
Pairing mode: This mode allows you to add multiple pairwise friend mugs through the app when Bluetooth is connected.
-
Enter the main interface of the Mug, press the string of numbers below to copy your ID number, and exchange your ID number with your friend. Click on “Connect Friend’s Magic Mug”, and enter the received friend ID number to add.
-
Both parties need to complete the addition separately, and single-party addition is invalid.
-
If you can see the friend information under “Friend’s Magic Mug”, it indicates that the pairing of the two mugs has been successful. You can manage and dissolve pairing relationships.
-
Different LED light colours can be set to distinguish intimate relationships with friends. Two successfully paired mugs can send and receive signals to each other.
-
Click the ® key on the mug to send a “love signal” to a friend. The signal flashing state will last for a maximum of 30 minutes.
-
After the receiver touches the key or waits for a timeout, the signal will automatically turn off. If there are multiple intimate relationships, you need to manually set the best friend to the “top” status.
-
Connect Bluetooth: Confirm that both the Mug and the phone’s Bluetooth are turned on.
-
First, please open the Magic App and log in using a social account. Then, click on “Connect New Device” below and select the Magic Mug. After searching for MAGlI-G1, click on “Connect”. The Bluetooth logo in the upper right corner of the app displays
indicating the successful connection of the Mug. If grey is displayed, it indicates the connection was unsuccessful, please try again. -
Local mode: In this mode, there is no need to constantly connect to the phone’s Bluetooth. After configuring the app for the first time, the cup only has a reminder function. When using it for the first time, you need to turn on Bluetooth and use the Magic App to bind the Mug. After binding, click on the pattern to set when to drink or take medicine. After saving, the alarm will automatically remind for 30 minutes when it arrives. Touch the key to turn it off.
Note: Local mode cannot use the Mug key to send and receive signals, and is suitable for users who do not have a mobile phone or have difficulty operating their phones. -
Pairing mode: This mode allows you to add multiple pairwise friend mugs through the app when Bluetooth is connected. Enter the main interface of the Mug, press the string of numbers below to copy your ID number, and exchange your ID number with your friend.
-
Click on “Connect Friend’s Magic Mug”, and enter the received friend ID number to add. Both parties need to complete the addition separately, and single-party addition is invalid. If you can see the friend information under “Friend’s Magic Mug”, it indicates that the pairing of the two mugs has been successful. You can manage and dissolve pairing relationships. Different
-
LED light colours can be set to distinguish intimate relationships with friends. Two successfully paired mugs can send and receive signals to each other.
-
Click the ® key on the mug to send a “love signal” to a friend. The signal flashing state will last for a maximum of 30 minutes. After the receiver touches the key or waits for a timeout, the signal will automatically turn off. If there are multiple intimate relationships, you need to manually set the best friend to the “top” status.
IMPORTANT SAFEGUARDS
When using this product, basic safety precautions should always be followed,
including the following:
- Read all instructions.
- Avoid putting hot drinks with a temperature exceeding 55 °C /131°F to prevent burns.
- Do not microwave. The product is equipped with a lithium battery, which poses a risk of explosion when heated.
- Do not use at high temperatures to avoid short circuits or damage to electronic devices and deformation and discolouration of plastic parts, which may affect normal use.
- Close supervision is necessary when any appliance is used by or near children.
- Use only the power supply and charging base provided with the product for charging.
- Unplug the power supply when not in use and before cleaning. Clean the power and charging base with a clean, dry cloth and do not immerse in water or other liquid to protect against fire, electric shock and injury to a person.
- Hand wash only. The dishwasher is not allowed. Please use clean water and mild detergent for cleaning.
- Do not use grinding powder, metal cleaning balls, stain removers, or cleaning agents containing chlorine to avoid scratching, rusting, or corrosion of the product surface.
- The ambient temperature for normal use of the product is 0-40 °C/0-104 °F. Do not put it in the freezer.
- Do not operate the product with a damaged cord, plug or charging base, or after the product malfunctions.
- Attempting to open or service the unit voids all warranties and may cause injury to the user.lf you experience problems with the device, discontinue use and contact Magii or the sales service provider for assistance.
- 11 Any ot the instructions provided are not to be lowed, or the equipment is used in a manner not specified by the manufacturer protection provided by the equipment for fire electric the shock of misery to persons may be moaned.
- This product is intended for consumable clouds like coffee, tea cola and so on.
- Cannot be used for long-term insulation of dairy products or baby food (a risk of bacterial growth.
- Carbonated drinks, sparkling drinks, dry ice, etc. cannot be sealed with cup lids, and gas circulation should be ensured (pressure inside the cup) Increasing it may cause beverage splashing or product damage, which may cause personal injury
- Ine intelligent function or unis product needs to be achieved through mobile Bluetooth. Please confirm that the Bluetooth and APP are connected when using this UNCLOT.
- Save these instructions
PACKAGE LIST
KEY DEFINITION
- Power on Press and hold for 3 seconds, and the light will be in a running state
- Power off: Press and hold for 3 seconds, and the light will be in a flashing state
- Lock/Unlock: Press and then press , and the light will be in a flashing state
- Key : Send [Love signalled, and receiving light will be in breathing light state
- Key : Timed alarm light, touch to turn off
- Key : Intimate message alarm light, touch to turn off
- Scan the QR code on the right and download it according to the corresponding system through download.magiilife.com.
DOWNLOAD IN APP STORE
You can search for “Maaii” in the App Store to download:
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/IV technician for help.
Caution
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.