Shenzhen Ruiyu Intelligent Technology Co Ltd J92 Bluetooth Headset User Manual

Shenzhen Ruiyu Intelligent Technology Co Ltd J92 Bluetooth Headset

USER MANUAL

Please read the instructions carefully when using this produet

Product Usage Instructions:

Switching On:

To turn on the Bluetooth headset without a Bluetooth connection, perform a double-click action twice.

Languages:

The device supports both Chinese and English languages. Users can switch between languages based on their preference.

Compliance and Interference:

This device complies with Part 15 of the FCC Rules. Users should adhere to the following conditions:

• Reorient or relocate the receiving antenna if needed.
• Increase the separation between the equipment and receiver to avoid interference.
• Connect the equipment to a power outlet on a different circuit than the receiver.
• Consult the dealer or a radio/TV technician for assistance if necessary.

The device has been evaluated to meet general RF exposure requirements, ensuring safe usage.

Specifications and Features

• Bluctooth Version: VS.O
• Bluetooth Protocol: A2DP, AVRCP, Headset, Handsfree
• Frequency Range: 2400.0-2483.5 MI-lz
• Working Scope: 10 meters
• Charging Ti.J:ne: about 2 hours

Buttons (refer to| Funct on| Prev ous Status| Operation| Voice Prompt| Remark
---|---|---|---|---|---
Pairing Method| Switch on| Power off| Long press 1 Ss| Switch on| Pair ing ethod:continous long press Funct onkey for
5 seconds.unt l the red and blue l ghts are ftashing the headphonesare in pa ring status.open the Bluetooth of phone and select J26 to
complete pairing.
Power off| Swtch on| Long press 2,5s| Power off
Function Key| Pairing| Power off| Long presses| Access to pairing status
Paired a nd Connected| Sw tch on| | Complete pa r ng|
Conn ected| Sw tch on| | Du(short voice)|
Refuse call| Standby(calls)| Long press1.5s| Du(short voice)| Or press the hang u p botton of mob le phone
Next song| listen to mus c| Doubl’7-Click| |
The last number red al| Standby| Long press 2s| |
Stop d alng Reconnect| Dial number
Switch on (disconnect status)| Short  press
Long press1 .Ss| Du(short voice)
Du(short voice)| Or press the hang up botton of mobile phone
Play| pause/stop| Short press| None|
Pause| play| Short press| None|
| Lack ng power| Switch on| | None|
| Switching| Turn on without
bluetooth connect on doube| | Chinese/English|
Thechargi ngbox is out| Blue  light open
Cnllrge the dlarg ng box| The red light Hashes when charging and turns on when charging  Charging t me: 1  hour
Charge the
�ootoolh head$el| When the b u-etooth is cha rged, the r ed l ght s urnedo n.Afier the tfuetoolh                     Charg ng time: 1 to 2 hours
chwging is com plete d, the  blue l; ght is tUJn ed on a nd c osed w th tho charg ng box lamp
Connect 2 cellphones at the same l me| 1.conne ct to cellphone 1 a nd tum off t he  bluetooth of cellphone 1
2.connect to cellphone 2 and tum off the  bluetooth of cellphone 2
3.turn on the bluetooth of both cellphones
4.conlinuous press Multifunct on key for Ss unt l the red and blue l ghts flashing finally select J26 on b oth cellphones

Troubleshooting

If you are unable to connect your headset with moblle phone, please try the following:

• Ensure your headset is turned on and is fully charged.
• Ensure the headset is paired with your mobile phone.
• Ensure your mobile phone’s Bluetooth feature is activated. Please refer your mobile phone user guide for specific instruction.
• Ensure the headset is within a 10 meters range of your mobile headset.

Care and Maintenance Headset

Consider turning your headset off before placing it in your pocket or bag. If the MBF is accidentally activated., your mobile phone may place an unintended call.

• Do not expose the headset to liquid, moisture or humidity as it is not waterproof, Do not use abrasive cleaning solvents to clean the headset.
• Do not expose the headset to extreme temperature conditions. The best store temperature range is from -10 to +60C, otherwise the life of the headset will be influenced.
• Do not dispose of the headset in a fire as it this may result in an explosion. Do not bring your headset into contact with sharp objects as this will cause scratched and damage.
• Do not attempt to disassemble the headset as it dose not contain serviceable components.
• Do not attempt to Disassemble the headset.

If you do not use the headset for long periods, be sure to store it in a dry place, free form extreme temperature conditions and dust.

Product Warranty Card

This card is the product warranty certificate, please take good care of it

Contact:

Product maintenance record

Warranty Card

Product model Purchase date____
User name: Contact number :____
Changing or Refunding:____

Warranty clause:

1. warranty service is limited to the normal use of the effective warranty period, due to the quality of the product itself caused by non-human damage to the fault;
2. since the purchase date within 30 days, if there is a performance fault (non-human damage), free return;
3. the main product since the purchase date, within one year warranty;
4. more than the warranty period or not within the scope of warranty still need our company to repair, we accept the maintenance fee as appropriate;

Note: when you tear or lose the warranty card, you will lose the chance of warranty, and we have the final right to interpret the data

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.ct.

The device has been evaluated to meet general RF exposure requirement.

Frequently Asked Questions (FAQ):

Q: How do I pair the Bluetooth headset with my device?

A: To pair the Bluetooth headset, first ensure it is turned on.
Then, enable Bluetooth on your device and search for available devices. Select the J92 headset to complete the pairing process.

Q: Can I use the Bluetooth headset with multiple devices?

A: Yes, you can pair the Bluetooth headset with multiple devices, but only one device can be connected at a time. Disconnect from one device before connecting to another.

Q: How do I charge the Bluetooth headset?

A: Use the provided charging cable to connect the headset to a power source. Ensure proper alignment and charging indicators to monitor the charging progress.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>