COOPER Lighting WPS2-WH PRO Industrial Fixture Mount High Bay Low Bay Sensor Owner’s Manual
- August 26, 2024
- COOPER Lighting
Table of Contents
WPS2-WH PRO Industrial Fixture Mount High Bay Low Bay Sensor
“`html
Specifications:
-
Product Name: WaveLinx PRO Industrial Fixture Mount High Bay /
Low Bay Sensor -
Compatibility: WaveLinx Mobile App, IEEE 802.15.4
-
Device Security: WaveLinx PRO
-
Installation Heights: Up to 40 feet
-
Coverage Patterns: Up to 5000 square feet
-
Power Source: Co-located light fixture
Product Usage Instructions:
Installation:
-
Ensure the industrial light fixture is equipped with the 4-pin
Zhaga Book 18 compliant socket. -
Integrate the sensor into the fixture without the need for
tools. -
Ensure proper connectivity with the WaveLinx PRO system.
Configuration:
Use the WaveLinx Mobile application to configure the sensor:
- Map the sensor to specific areas or control zones.
- Select occupancy or vacancy mode.
- Set occupied and unoccupied light levels.
- Adjust the hold time as needed.
FAQ:
Q: What is the power source for the sensor?
A: The sensor receives power from its co-located light fixture,
eliminating the need for battery replacement.
Q: What is the coverage area of the sensor?
A: The sensor offers coverage patterns up to 5000 square feet,
based on its field of view specifications.
Q: Is additional equipment required for full
functionality?
A: Yes, the WaveLinx PRO Industrial Fixture Mount High Bay / Low
Bay Sensor requires a WaveLinx Area Controller (WAC) for complete
functionality within the WaveLinx connected lighting system.
“`
Project Prepared by
Catalog # Notes
Type Date
4-pin Zhaga Book 18 socket
WaveLinx
PRO Industrial Fixture Mount High Bay/Low Bay Sensor (WPS*)
Motion and Closed Loop Daylighting including Field Installed Aisle Shield
Typical Applications Industrial · Manufacturing
Interactive Menu
· Order Information page 2 · Additional Resources page 3 · Connected Systems
page 5 · Product Warranty
Product Certification*
Part 15/ECES-003
· Meets latest ASHRAE Standard 90.1 requirements · Meets latest IECC requirements · Meets latest CEC Title 24 requirements
Product Features
Compatibility
WaveLinx Mobile App
IEEE 802.15.4
Device Security
WaveLinx PRO
Overview
Customer Security
Daylighting Control
Occupancy Sensor
The PRO Industrial Fixture Mount High Bay / Low Bay Sensor offers passive
infrared (PIR) occupancy and a photocell for closed loop daylighting. WaveLinx
PRO industrial sensors offer installation heights up to 40 feet and have
coverage
patterns up to 5000 square feet (see sensor specifications – field of view).
When part of WaveLinx PRO, the sensor operates on a wireless mesh network
based on IEEE 802.15.4 standards.
The sensors offer simple tool-less integration into WaveLinx PRO industrial
light fixtures equipped with the 4-pin Zhaga Book 18 compliant socket. Once
installed, sensors receive power from their co-located light fixture with no
batteries to replace. The sensor in combination with the WaveLinx Mobile
application allows you to gain considerable energy savings from occupancy and
daylight sensing lighting control. The WaveLinx Mobile application allows you
to map the sensor to
any area or control zone, select occupancy or vacancy, occupied and unoccupied
light levels and set the hold time.
Product Features & Benefits
· Models suitable for High bay (up to 40ft / 45ft major motion) and Low bay
(up to15ft) applications · Out of the box functionality: Occupied to Full,
Unoccupied to 10%, daylighting disabled · Passive Infra-Red (PIR) motion
sensor with coverage up to 5000 square feet · Integrated photocell for closed
loop daylight harvesting · Software configurable settings with WaveLinx Mobile
application · Simple tool-less twist lock fixture connection via 4-pin Zhaga
Book 18 socket · IP66 rating for warehouse and manufacturing environments ·
Energy calculations available through WaveLinx CORE
*T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification.
PS503095EN page 1
July 2024
WaveLinx
PRO Industrial Fixture Mount High Bay / Low Bay Sensor
Order Information
WaveLinx PRO Industrial Fixture Mount High Bay / Low Bay Sensors are
accessories to the WaveLinx connected lighting (WCL) system and requires a
WaveLinx Area Controller (WAC) for full functionality.
WaveLinx PRO Industrial Fixture Mount High Bay / Low Bay Sensors are used to
provide occupancy and daylight dimming to spaces from the industrial light
fixture. For energy code compliance, additional sensors may not be required.
Catalog Number
Catalog #
Description
WPS2-WH
WaveLinx PRO Industrial Fixture Mount Low Bay Sensor, White, 7 – 15ft (2.1 – 4.5m)
WPS4-WH
Notes For use with industrial light fixtures equipped with the WaveLinx PRO
Zhaga compliant 4-pin socket only.
WaveLinx PRO Industrial Fixture Mount High Bay Sensor, White, 15 – 40ft (4.5 –
12.2m)
Notes When used as a component in the WaveLinx connected lighting system,
WaveLinx PRO system design best practices (including WaveLinx Area Controller
placement, line of sight distances, number of hops, etc.) must be followed.
High mount models accommodate mounting height to 45ft (13.7m) for major motion
(vehicles, fork trucks, etc.) – may not detect minor motion of people
depending on conditions.
Required Accessories
All WaveLinx connected lighting (WCL) system accessories require at least one
WaveLinx Area Controller (WAC2) for communications. Ensure the bill of
material includes one of the following components.
Catalog Number
Catalog Number WAC2-POE WAC2-120
Optional Accessories For connection to 120VAC outlets.
WaveLinx Area Controller G2, PoE powered WaveLinx Area Controller G2 with 120VAC to PoE Injector
Description
Catalog Number
Catalog Number WPOE2-120
120VAC to PoE Injector
Product Specifications
Mechanical Size: Base Diameter 3.2″ (82mm) Height: 1.6″ (41mm) Weight: 0.20
lbs (0.10 kg) Environment:
· Operating temperature: -40°F to 131°F (-40°C to 55°C) Sensor passive
infrared (PIR) performance may become exceedingly sensitive below -4°F (-20°C)
Note: WaveLinx Area Controller should be installed in an indoor conditioned
envirionment, preferably with line of sight through a window to one or more
WaveLinx PRO wireless devices.
· Storage temperature: -40°F to 158°F (-40°C to 70°C) · Relative humidity
operating: 0% to 95% non-condensing · Default behavior intended for indoor use
only Mounting: Fixture mount Mounting Height: High bay up to 40ft (12m) and
Low bay up to15ft (5m) Color: White Housing: UV stabilized plastic Ingress
protection: IP66 Light Sensor Detector Shields: Field configured shield
included Daylighting Installation: · Ensure that sensor is not looking
directly at artificial light · Ensure that sensor is not obstructed · Use
configurable lens mask for desired directionality
Electrical Input Requirements: Fixture connection via 4-pin Zhaga Book 18
socket
Software Specifications · Any number of sensors can be mapped to any number of
zones · Mobile app configuration for Occupancy/Vacancy · Remote Hold Time
settings fully configurable via mobile app · Mobile app configuration of
Occupied and Unoccupied light levels · Energy calculations available through
WaveLinx CORE
Description
Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter
Power: + 8dBm Range: Sensor to sensor; 160ft (49m) LOS (best practice) System
Performance Maximum number of nodes supported: 200 per WaveLinx Area
Controller (best practice 150 devices) Standards/Ratings · cULus Listed –
Energy Management Equipment (UL916) · FCC Part 15/ECES-003 · Meets latest
ASHRAE Standard 90.1 requirements · Meets latest IECC requirements · Meets
latest CEC Title 24 requirements Warranty Five year warranty standard
T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. PS503095EN page 2 July 2024
WaveLinx
Dimensional Details
PRO Industrial Fixture Mount High Bay / Low Bay Sensor
1.6″ [42mm]
Mounting Height
40′ [12.2m] (45′ [13.7m] major motion)
3.2″ [81mm] TOP
1.5″ [38mm] SIDE
15′ [4.6m]
Installation
Both the WPS2 and WPS4 easily install into WaveLinx PRO-ready LED fixtures
equipped with Zhaga Book 18 4-pin sockets. Sensor connection is enabled via
the simply twistlock connection and provides immediate out-of-the-box
functionality.
Removal
Installation
PS503095EN page 3
July 2024
WaveLinx
Field of View – Low Bay
TOP VIEW:
24ft [7.3m]
PRO Industrial Fixture Mount High Bay / Low Bay Sensor
CL
15ft [4.5m]
5ft [1.5m]
0
CL
5ft [1.5m] 15ft [4.5m]
24ft [7.3m]
SIDE VIEW:
0
8ft [2.4m]
15ft [4.6m]
24ft [7.3m]
Note: The “beam” pattern obtained depends strongly on the detector used with this array. The pattern shown is intended solely as a general guide and is not to scale.
15ft
5ft
0
[4.5m] [1.5m]
5ft [1.5m]
15ft [4.5m]
24ft [7.3m]
PS503095EN page 4
July 2024
WaveLinx
Field of View – High Bay
PRO Industrial Fixture Mount High Bay / Low Bay Sensor
TOP VIEW:
50ft [15.2m]
CL
35ft [10.6m] 21ft [6.4m] 13ft [4.0m] 0
13ft [4.0m] 21ft [6.4m] 35ft [10.6m] 50ft [15.2m] SIDE VIEW:
0
CL
Note: The “beam” pattern obtained depends strongly on the detector used with
this array. The pattern shown is intended solely as a general guide and is not
to scale.
20ft [6.1m]
30ft [9.1m]
40ft
[12.2m]
50ft
35ft
21ft 13ft
0
13ft 21ft
35ft
50ft
[15.2m] [10.6m] [6.4m] [4.0m] [4.0m] [6.4m] [10.6m] [15.2m]
High mount models accommodate mounting height to 45ft (13.7m) for major motion (vehicles, fork trucks, etc.) – may not detect minor motion of people depending on conditions.
PS503095EN page 5
July 2024
WaveLinx
PRO Industrial Fixture Mount High Bay / Low Bay Sensor
System Diagram:
This diagram shows the main components of the WaveLinx connected lighting
system with CAT and PRO devices.
The PRO devices communicate using wireless mesh technology based on the IEEE
802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller
(WAC) is required for power and data access to the building lighting network.
The CAT devices communicate over the category 5 based communication bus and
control the light fixtures using a relay (on/off) and 0-10V output
(dim/raise).
WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the
Ethernet network.
View WaveLinx Network
and IT Guidance Technical Guide
Smart Spaces Apps
CORE Admin
CORE Lighting
CORE Locate
CORE Insights
CORE Insights on Cloud
Networked Relay Panel
WaveLinx CAT
Wired
1
2
Wallstation
3 4
Ceiling Sensor
Dimming Switchpack or Emergency Switchpack
Contact Closure or Sensor Interface
WaveLinx CORE
Touchscreen
CORE Pro on-prem enterprise management software
PoE Power
Area Controller Area Hub
Access Point
WaveLinx Mobile App
Wireless
Relay Switchpack
Ceiling Sensor
Wired & Wireless
Same set of tools and features
Relay Switchpack with Contact Closure Input
Integrated Industrial Fixtures
Wallstation (AC or Battery)
Controlled Receptacle
Building Automation
System
BACnet Router
Firewall
WaveLinx PRO
Tilemount Sensor
Integrated Ambient Fixtures
Integrated Outdoor Fixtures
RTLS Tag
KEY
Ethernet (IEEE 802.3)
WaveLinx CAT (CAT5)
Bluetooth (IEEE 802.15.1)
WaveLinx PRO (IEEE 802.15.4)
WiFi (IEEE 802.11)
Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com
© 2024 Cooper Lighting Solutions All Rights Reserved.
Specifications and dimensions subject to change without notice.
Control Systems
· WaveLinx
PS503095EN page 6
July 2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>