milleteknik 350-243 ECO Mains Failure Alarm Card User Guide
- August 26, 2024
- Milleteknik
Table of Contents
milleteknik 350-243 ECO Mains Failure Alarm Card
Product Information
Specifications
- Alarm Output: NO/CO/NC
- Manual Article Number: 350-243
- Manufactured in Milleteknik’s factory in Partille, Sweden
Installation and Connection
To install and connect the product, follow these steps:
- Identify the alarm output type required – NO (Normally Open), CO (Changeover), or NC (Normally Closed).
- Refer to the manual for specific installation instructions based on your requirements. Ensure proper wiring and connections are made according to the guidelines provided.
- Test the alarm output to verify the correct installation and connection.
Translation of Document
The translation of this document is not confirmed. Please refer to the original Swedish version for accurate usage.
Contact Information
For warranty, support, and inquiries, contact Milleteknik at:
- Address: [Insert Address]
- Email: [Insert Email]
- Phone: [Insert Phone Number]
Disclaimer
All information provided is subject to change without prior notice. Any errors in printing are unintentional.
FAQ
Q: Can the alarm output be customized?
A: The alarm output type can be selected as NO, CO, or NC based on your requirements during installation.
Q: How often should I test the alarm output?
A: It is recommended to test the alarm output periodically to ensure proper functioning in case of emergencies.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>