Ford VM1PZ-78676A00-A XG Rail Station Rear Seat Back Cargo Storage Installation Guide
- August 24, 2024
- Ford
Table of Contents
Ford VM1PZ-78676A00-A XG Rail Station Rear Seat Back Cargo Storage
BRONCO SPORT 2021 to Current
Attention : Do not attach the accessory retention tether strap J-hook clip to a child seat tether anchor already in use. Prior to installing a child seat, remove the accessory assembly and the retention tether strap j-hook clip from the child seat tether anchor. Simultaneous attachment may not allow the child seat to be secured as intended, which could result in serious injury or death.
Attention: Weight needs to be “less or equal to”to 10 / 6 lb. Do not load driver’s side accessory with more than 10lbs. Do not load passenger side accessory with more than 6lbs.
Specifications
- Part Number: VM1PZ-78676A00-A
- Weight Limit: Driver’s side – 10 lbs, Passenger side – 6 lbs
KIT CONTENTS
INSTALLATION INSTRUCTIONS
FAQs
Q: Can the accessory retention tether strap be attached to a child seat
tether anchor in use?
A : No, it is advised not to attach the accessory retention tether
strap J-hook clip to a child seat tether anchor already in use to avoid safety
risks.
Q: What should be the maximum weight loaded on the driver’s and passenger
side accessories?
A : The driver’s side accessory should not be loaded with more than 10
lbs, and the passenger side accessory should not exceed 6 lbs.
To access the installation instructions & warranty information in English,
French and Spanish, go to the following web address.
xgcargo.com/pages/ford-pdf-instructions
Documents / Resources
| Ford
VM1PZ-78676A00-A XG Rail Station Rear Seat Back Cargo
Storage
[pdf] Installation Guide
VM1PZ-78676A00-A XG Rail Station Rear Seat Back Cargo Storage, VM1PZ-
78676A00-A, XG Rail Station Rear Seat Back Cargo Storage, Station Rear Seat
Back Cargo Storage, Rear Seat Back Cargo Storage, Seat Back Cargo Storage,
Back Cargo Storage, Cargo Storage, Storage
---|---