IKRA IERM 1232 Electric Lawn Mower Instruction Manual

**IKRA IERM 1232 Electric Lawn Mower Instruction Manual

**

TECHNICAL DATA

Noise details

Measured according to 1) EN 60335; Uncertainty K = 3 dB (A) 2) 2000/14/EG & 2005/88/EG

Sound pressure level LpA 1)| 81 dB(A)
Measured sound power level| 91,4 dB(A); K=2,35 dB(A)
Guaranteed sound power level LWA2)| 96 dB (A)
Vibration details

Total vibration values (triaxial vector sum) Determined properly EN 60335, Uncertainty K = 2,0 m/s2

Vibration emission value ah| ≤ 2,5 m/s2

Technical changes reserved.

WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.

The vibration emission level may be used to compare one tool with another.

It may be used for a preliminary assessment of exposure.

An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns

SYMBOLS

• Warning/caution!

• Please read the instructions carefully before starting the machine.
  Save all warnings and instructions for future reference

• Warning against thrown-off items
  Do not let other persons get near due to foreign objects being thrown off.
  Caution – Sharp knives

• Keep fingers and feet away
  Switch off the device and disconnect the mains plug before carrying out any maintenance, adjustment or cleaning work or if the cable is tangled or damaged.

• Keep the supply flexible cord away from the blades.

• Keep dry at all times.
  Do not expose the appliance to rain and do not use it in wet or moisture conditions.

• CAUTION Blades run down. Wait until all rotating parts have stopped.

• Rated voltage / Frequency

• Rated input

• Cutting diameter

• Sound power level

• CE marking

• II (double insulation)

• Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

What In The Box

Assembly Instruction

Prepare to use

Power On

START

STOP

SPECIFIED CONDITIONS OF USE

The lawnmower is designed for mowing medium to large lawns in private gardens around the house or in hobby gardens. Due to the physical danger to the user and other persons, the lawn mower may not be used for other purposes.

WARNING

Risk of injury

The mower must not be used for cutting bushes, hedges and thickets, for cutting and mulching creepers or lawns on roofs or in balcony boxes. The mower must also not be used as a crusher for mulching tree cuttings and hedges or levelling any terrain roughness.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Please note that permissible uses for the tool could be limited by national regulations. It is necessary to comply with the regulations applicable in the country where the truck is used.

Do not use the device near flammable liquids or gases. Risk of fire and explosion in case of short circuit.

SAFETY INSTRUCTIONS

The device must not be used by children. This device can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and know- ledge if they are supervised or have been instructed in the safe use of the device and understand the resulting dangers. Children are not allowed to play with the device. Cleaning and user maintenance must not be carried out by children.

Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. Remember that the machine operator or user is responsible for accidents involving other people or their property.

Never allow children or people unfamiliar with these instructions to use the lawn mower.

Local regulations may stipulate the minimum age of the user.

Keep children and other persons including animals in a safe distance when using the appliance.

Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

DANGER

Warning: This power tool generates an electromagnetic field during operation. Under certain circumstances, this field may affect active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend that individuals with medical implants consult your physician and the manufacturer of the medical implant before operating the machine.

WARNING

Wear personal protective equipment.

• Always wear goggles when using the machine.
• Wear ear protectors!
• Wear solid shoes and long trousers.
• Avoid wearing loose clothing or clothing with hanging strings or belts. Hear, clothing and gloves must be out of reach of moving parts as they could get caught by the rotating parts. Do not use the appliance when barefooted or in open sandals.
• Use protective gloves when handling the blades

Carefully check the terrain where the appliance is going to be used and remove all objects that could get caught or thrown off by the appliance such as stones, branches, wires, animals, etc.

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not blunt, worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance; Worn or damaged cutting blades and fastening bolts may only be replaced in sets to avoid imbalance.

Do not use the appliance if you are tired, ill, under influence of drugs, alcohol drinks or medicaments.

Do not overreach. Keep proper footing and balance at all times. Be careful when going backwards – risk of tripping! Provide adequate lighting or good lighting conditions when working with the machine. Poor lighting/light conditions represent a high safety risk.

Avoid operating the equipment in wet grass, where feasible;

Walk! Never run! Only operate the machine at a walking pace.

Make sure your posture is safe, especially on slopes. Do not cut on too steep slopes. Be particularly careful when changing travelling direction on slopes.

Mow across the slope, never up or down.

Pay maximum attention when turning around and pulling the appliance to you.

Be especially careful when changing the direction of travel on a slope.

Do not mow on excessively steep slopes.

Stop the cutting blade (s) if the lawnmower needs to be tilted for transport over surfaces other than grass and if the lawnmower is being moved to and from the area to be mowed.

Never use the lawn mower with damaged protective devices or grids or without attached protective devices, e.g. B. baffles and / or grass catchers.

Start or operate the starter switch with caution according to the manufacturer‘s instructions. Make sure there is sufficient distance between your feet and the cutting knife (s).

The lawnmower must not be tilted when starting or starting the engine, unless the lawnmower must be raised during the process. In this case, tilt it only as far as is absolutely necessary and only lift the side away from the user.

Never put your hands or feet on or under rotating parts. Always stay away from the discharge opening.

Never lift or carry a lawn mower with the engine running.

WARNING

Risk of injury

Rotating blades may lead to serious injuries by cutting or amputating parts of the body.

• Switch the mower off whenever carrying or inclining it or when being outside a grass area. Wait until all rotating parts have stopped.
• All protection covers and safety devices must be correct- ly attached to operate the device.
• Never remove the collection bag when the machine is being operated.
• Do not start the engine before your feet are in a safe distance from the cutting tools.
• Do not incline the appliance when being started.
• Do not start the appliance when you are standing in front of the ejection opening.
• Never touch under the housing body when the engine is running. Keep a distance from the ejection opening at all times.
• Any works / adjusting on the machine to be only performed with the engine switched off, contact key taken out and when the mowing blade is not moving.

WARNING

Risk of injury

Thrown-off stones or soil may lead to injuries

• Before mowing, check the area to be mowed for any undesirable objects.
• Make sure the collection bag is properly suspended.
• Wear safety goggles when working.

Stop the device and disconnect it from the power supply Wait until all rotating parts have stopped and the appliance has cooled down.

• whenever you leave the lawnmower
• before removing blockages
• before checking, cleaning or working on the device
• after contact with a foreign object, to check the devicefor damage
• before freeing the device from accumulated material
• before tilting or transporting the device

Disconnect the machine from the power source and take the following steps before restarting and operating the machine:

• check for damage
• replace or repair damaged parts
• check for loose parts and tighten them

When working with this machine, do not use spare parts other than those recommended by us. Using spare parts not recommend by us can result in serious injuries to persons or damage to the machine.

Despite the observance of the operating instructions there still may be some hidden residual risks.

• Make sure that all nuts, bolts and screws are tight and that the device is in a safe working condition.
• Check the grass catcher regularly for wear or loss of functionality.
• For safety reasons, replace worn or damaged parts.
• Please note that on machines with several cutting blades, the movement of one cutting blade can lead to the other cutting blades rotating.
• When setting the machine, make sure that no fingers are trapped between moving cutting blades and stationary parts of the machine.
• Let the engine cool down before switching off the machine.
• When servicing the cutting blades, make sure that the cutting blades can be moved even when the voltage source is switched off.
• For safety reasons, replace worn or damaged parts. Use only original spare parts and accessories.

The appliance must be stored in a dry place and protected from frost.

Lock the device in a proper place to protect it from unauthorised use.

Let the engine cool down, before you store the device in a closed room.

CAUTION

Damage to health arising from vibrations to handand arms if the device is used for a long time or if the device is not guided and evaluated properly. Vibration damping systems are no guaranteed protection against white finger disease or carpal tunnel syndrome. Therefore, it is necessary to carefully check the state of your fingers and wrist if you have regularly used the appliance for a long time. If any symptom of the diseases above appears, seek medical advice immediately. To reduce the white finger disease risk, keep your hands warm and take regular breaks during your work.

CAUTION

Hearing damage

A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors! When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours, during which it is allowed by statute or other local regulations. Adhere to any applicable rest times and limit your working time to the necessary minimum time.

For your personal protection and the protection of people nearby, suitable hearing protection must be worn. Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise protection (e.g. wearing of ear protectors).

Please do also consider any local regulations concerning noise protection!

MAINS CONNECTION

DANGER

Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).

Before use check machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorised Service Agents.

Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency complying with current regulations.

Keep the connection and extension cables away from dangerous moving parts to avoid damaging them. Only use splash proof extension cables approved for outdoor purposes. The stranded wire cross-sectional area of the extension cable must be at least 1.5 mm2 for cables up to 25 m and 2.5 mm2\ for cables above 25 m.

Only plug-in when machine is switched off.

The device is only intended for use on premises that have a continuous current carrying capacity of >=100 A per phase and are supplied from a electrical grid with a rated voltage of 400/230V.

If necessary, please consult your electricity company to ensure that the continuous current carrying capacity of the mains at the connection point is sufficient for connecting the device.

WARNING

WARNING! Electric shock! There is a risk of an injury caused by electric shock!

Do not use the device if the cable or plug is damaged or worn.

If the cable is damaged during use, it must be disconnected from the mains supply immediately. Do not touch the cable until it has been disconnected from the mains. Do not connect a damaged cable to the power supply and do not touch a damaged cable before disconnecting it from the power supply, as damaged cables can lead to contact with active part

MAINTENANCE

DANGER

Before any adjustment, cleaning and maintenance work, switch off the device and disconnect it from the power supply

WARNING

Risk of injury

Caution – Sharp tines

Keep fingers and feet away.

For machines with several tine attachments, ensure that the movement of one tine attachment can lead to rotation of the other tine attachments.

When adjusting the machine, be careful that no fingers are trapped between moving tine attachments and stationary parts of the machine.

When maintaining the tine bodies, be aware that the tine bodies can be moved even when the drive is switched off.

Check the collection bag at regular intervals for any wear and aging.

After every work stint, clean the machine thoroughly to remove all dust and debris, and repair or replace any faulty parts.

Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!

Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making.

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition;

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

Repairs and works specified in these instructions may only be performed by qualified authorised staff.

Use only original accessories and original spare parts. Using other spare parts can result in accidents/injuries of the user. The manufacturer will not be liable for any such damage.

Please contact our service department if you need accessories or spare parts.

STORAGE

The appliance must be stored in a dry place and protected from frost. Lock the device in a proper place to protect it from unauthorised use.

Store idle power tools out of the reach of children. Let the engine cool down, before you store the device in a closed room.

FAILURE REMOVAL

cable, line and plug, and carry out repairs by a qualified electrician if necessary
Blades blocked| Check blades
Main switch or safety arch is not controlled| Refer to the instructions in these operating instructions.
Unsteady running, strong vibrations| Blade is damaged| Replace the blade

Repairs and works specified in these Instructions may only be performed by qualified authorised staff.

Blade is loose| Check and tighten the blade clamping
Poor mowing/catching performance| Blade is blunt| Have the blade sharpened or replaced
Battery is defective| Contact customer service
Collection bag is blocked| Empty the collection bag
Mowing height adjustment not regulated| Adjust the mowing height
Grass is not collected| Blocked channel| Clean the ejection channel
Full collection bag| Empty the collection bag
Too wet grass| Cut in dry weather

DISPOSAL

If your device should become useless somewhere in the future or you do not need it any longer, do not dispose of the device together with your domestic refuse, but dispose of it in an environmentally friendly manner.

Please dispose of the device itself at an according collecting/recycling point. By doing so, plastic and metal parts can be separated and recycled. Information concerning the disposal of materials and devices are available from your local administration.

References

• IKRA Gartengeräte Onlineshop
• Ikra GmbH
• Ikra GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>