Leapfrog 80-600900 2-in-1 LeapTop Touch User’s Guide

: July 26, 2024
: LeapFrog

Table of Contents

Leapfrog 80-600900 2-in-1 LeapTop Touch
INTRODUCTION
GETTING STARTED
PRODUCT FEATURES
ACTIVITIES
CARE & MAINTENANCE
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Leapfrog 80-600900 2-in-1 LeapTop Touch

INTRODUCTION

Thank you for purchasing the 2-in-1 LeapTop Touch™! Learning is a tap away! Kids can learn about letters, numbers, music and more on a laptop that’s made just for them. Open the laptop to see the screen in keyboard mode, then close the laptop and watch the screen magically swivel into tablet mode. Plus, the laptop can be customized to help your child spell their name!

INCLUDED IN THIS PACKAGE

One 2-in-1 LeapTop TouchTM
One parent’s guide

WARNING: All packing materials, such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please keep this parent’s guide as it contains important information.

Unlock the packaging locks:

Rotate the packaging locks 90 degrees counterclockwise.
Pull out the packaging locks and discard them.

GETTING STARTED

BATTERY INSTALLATION

Make sure the unit is turned OFF.
Locate the battery cover on the bottom of the unit.
Use a screwdriver to loosen the screw and open the battery cover.
Install 3 new AA (AM-3/LR6) batteries into the battery box as illustrated. (The use of new alkaline batteries is recommended for maximum performance.)
Replace the battery cover and tighten the screw to secure it.

BATTERY NOTICE

Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-zinc) rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in a fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if removable).
Rechargeable batteries are only to be charged under adult supervision.

Low Battery Indicator

When the batteries run low, a low battery icon will appear on the screen and the unit will power off. Remove the old batteries and replace with a new set.

PRODUCT FEATURES

On/Off/Volume Control Switch
Slide the On/Off/Volume Control Switch to turn the toy on and select the volume. The screen will light up when the unit is turned on.
Mode Selector
Choose Letters, Numbers, Messages, Games, or Music mode.
A-Z Keyboard with Numbers 1- 10
Kids learn letters and numbers while pretending to work on their laptops.
Flip Screen
Flip the screen open and closed to watch the laptop transform from a laptop to a tablet.
Easy Touch Tablet
In tablet mode, kids can touch the screen to play all new games for each of the five modes.
Paw Button
Press to reply to pretend email or select a melody.
Silly Button
Press to play fun sounds.

ACTIVITIES

Personalized Play
Enter Parent Mode by pressing the letters “P” and “M” while turning on the toy. Follow the instructions to enter or update your child’s name. This name will appear in both Laptop and Tablet Modes, allowing your child to learn to spell their name!
Laptop Mode
Choose from five modes and learn letters and numbers using the keyboard, trade pretend emails with Scout, guess the animal while learning 26 animal facts, and watch Scout dance to musical favorites.
Tablet Mode
Choose from five modes and tap to trade emoticons with Scout, play games with Violet and style her hair, learn numbers while feeding Scout, or tap music notes to keep Scout dancing.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries when the unit is not in use for an extended period of time.
Do not drop the unit on a hard surface and do not expose the unit to excess moisture.

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these steps:

Turn the unit OFF.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit back ON. The unit will now be ready to play again.
If the unit still does not work, replace it with an entire set of new batteries.

Environmental phenomena.

The unit may malfunction if subjected to radio-frequency interference.
It should revert to normal operation when the interference stops.
If not, it may become necessary to turn the power OFF and back ON or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

IMPORTANT NOTE: If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. or email support@leapfrog.com. Creating and developing LeapFrog® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-3 (B)/NMB-3(B)

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Visit our website for more information about our products, downloads, resources, and more. leapfrog.com For warranty information, please visit leapfrog.com/warranty.

FREQUENTLY ASKED QUESTIONS

What is the LeapFrog 80-600900 2-in-1 LeapTop Touch?

The LeapFrog 80-600900 2-in-1 LeapTop Touch is an interactive educational toy designed to resemble a laptop, offering a blend of fun and learning for young children.

What is the price of the LeapFrog 80-600900 2-in-1 LeapTop Touch?

The LeapFrog 80-600900 2-in-1 LeapTop Touch is priced at $17.97, making it an affordable educational toy option.

What are the dimensions of the LeapFrog 80-600900 2-in-1 LeapTop Touch?

The product dimensions are 6.1 inches in length, 10.08 inches in width, and 0.1 inches in height, providing a compact size suitable for young children.

How much does the LeapFrog 80-600900 2-in-1 LeapTop Touch weigh?

The LeapFrog 80-600900 2-in-1 LeapTop Touch weighs 1 pound, making it lightweight and easy for little hands to handle.

What is the item model number of the LeapFrog 80-600900?

The item model number for this product is 80-600900.

What is the manufacturer recommended age for the LeapFrog 80-600900 2-in-1 LeapTop Touch?

The LeapFrog 80-600900 is recommended for children aged 24 months to 5 years.

What type of batteries does the LeapFrog 80-600900 2-in-1 LeapTop Touch require?

The LeapFrog 80-600900 requires 3 AAA batteries to operate, which are typically not included.

Who is the manufacturer of the LeapFrog 80-600900 2-in-1 LeapTop Touch?

The LeapFrog 80-600900 is manufactured by VTech, known for creating educational toys for young children.

What is the warranty period for the LeapFrog 80-600900 2-in-1 LeapTop Touch?

The warranty period for the LeapFrog 80-600900 is 3 months.

What features does the LeapFrog 80-600900 2-in-1 LeapTop Touch offer?

The LeapFrog 80-600900 2-in-1 LeapTop Touch features interactive learning games, a touch screen, and a laptop design that transforms for different types of play.

Why isn't my Leapfrog 80-600900 2-in-1 LeapTop Touch turning on?

Ensure that the batteries are properly installed and fully charged. If using an AC adapter, check that it is securely connected and plugged into a working outlet. Also, check the power button for any damage.

What should I do if the screen on my Leapfrog 80-600900 2-in-1 LeapTop Touch is unresponsive?

Restart the device by turning it off and then back on. Ensure the screen is clean and free of any dirt or debris. If the issue persists, perform a reset by removing and reinserting the batteries.

Why is there no sound coming from my Leapfrog 80-600900 2-in-1 LeapTop Touch?

Verify that the volume is turned up and not muted. Check the batteries to ensure they have enough power. If the problem persists, inspect the speaker area for any blockages or damage.

What should I do if my Leapfrog 80-600900 2-in-1 LeapTop Touch is not connecting to Wi-Fi?

Ensure you are within range of a reliable Wi-Fi network and that the network is functioning correctly. Restart the LeapTop Touch and attempt to reconnect. If the issue continues, reset the network settings on the device.

Why is my Leapfrog 80-600900 2-in-1 LeapTop Touch freezing or crashing?

Turn off the device and remove the batteries. Wait a few minutes before reinserting the batteries and turning it back on. Ensure that the software is up to date and avoid running too many applications simultaneously.