COMICA VDLive 10 USB Versatile 2.4G Wireless USB Microphone User Manual

COMICA VDLive 10 USB Versatile 2.4G Wireless USB Microphone

Foreword
Thanks for purchasing Comica VDLive10 USB

Main Features

• Dual-channel 2.4G Wireless USB Microphone, Global Free Frequency
• Switchable Simplex / Duplex Transmission, Support Two-way Monitoring and Interaction
• Wide Compatibility for Phone, Computer, Camera, etc.
• Intelligent Noise Reduction, Working Distance Up to 50m (Open Area)
• 3.5mm Analog and USB Digital Two Output Modes
• Support Stereo Mode for all Compatible Devices
• Rechargeable Storage Case
• IPS Screen for Intuitive Operation and Usage
• Mono/Stereo Switch, Volume Adjustment and Mute Functions,etc.
• Internal and External MIC Two Input Modes
• Low Latency<20ms, Stable Transmission

Notice

• Some cameras are not compatible with 3.5mm TRRS-TRRS audio cable, it’s necessary to purchase 3.5mm TRS-TRS audio cable by yourself
• Don’t block the antenna position to avoid any poor signal generated when using
• Please power the transmitter and receiver off when charging

Tips

1. VDLive10 USB is universal for USB and 3.5mm interface devices. When used in smartphone, the system will compulsorily choose VDLive10 USB
2. When used in computer, please follow the steps below:
   • Insert VDLive10 USB into the computer
   • Click sound setting and set the “Comica_VDLive10” as the input and output device

Packing List

1. Transmitter(TX)
2. Receiver (RX)
3. Cold Shoe Mount
4. Wind Muff
5. USB C-USB A Adapter
6. Charging Cable
7. 3.5mm TRRS-TRRS Audio Cable
8. Charging Case
9. Carry Case
10. User Manual
11. Warranty Card

Components and Instruction

Transmitter(TX):

1. Built-in Antenna
2. Working Status Indicator Light (Orange light on: paired; Orange light flashing: unpaired; Red light on: MIC mute)
3. 3.5mm TRS External Mic Port（Simplex Mode） Monitoring Port（Duplex Mode）
4. S↑/ OFF / D↑↓ Switch Button ( S↑: Simplex mode; OFF: Power off；D↑↓: Duplex mode)
5. Volume / Mute Adjustment Button (Short press to adjust 4-level volume; long press to mute)
6. Charging Metal Contact
7. Reset Hole
8. Internal Mic

Simplex mode：

The transmitter audio is transmitted to the receiver unidirectionally, audio can only be monitored in receiver Simplex mode monitoring: audio of transmitter

Duplex mode：

Two way transmission of audio between transmitter and receiver, audio can be monitored in transmitter and receiver Duplex mode monitoring: audio of transmitter + audio of the platform on the device connected by the receiver

Receiver (RX)

1. 3.5mm Audio Output Port ( 3.5mm analog output mode) Monitoring Port ( USB digital output mode)
2. Built-in Antenna
3. USB-C Plug
4. Charging Metal Contact
5. Reset Hole
6. ON/OFF Switch Button (ON: Power on; OFF: Power off )
7. M/S Switch Button (M: mono mode; S: stereo mode; Short press to switch)

Charging Case

1. Power Indicator Light (There are four power indicator lights, one of which represents 25% of the power)
2. Switch Button (Press it to open the charging case)
3. Pairing Button (Long press to pair)
4. Transmitter Charging Status Indicator Light (Red light on: charging; Blue light on: fully charged)
5. Receiver Charging Status Indicator Light (Red light on: charging; Blue light on: fully charged)
6. Charging Metal Contact
7. USB-C Charging Port
8. Reset Hole

Please power the transmitter and receiver off when charging

Pairing Method

1. Put the transmitter and receiver into the charging case
2. Long press the pairing button to pair

Screen Display Instruction of Receiver (RX)

Group A is left channel and group B is right channel

Installation

Transmitter(TX)

1. In Simplex Mode
   • Switch the S↑/OFF/D↑↓ switch button to S↑ a（Simplex mode)
   • You can choose to use internal mic or external mic to satisfy your recording demands When using an external mic, the internal mic is automatically turned off
2. In Duplex Mode
   • Switch the S↑/OFF/D↑↓ switch button to D↑↓ Duplex mode)
   • Install the transmitter on the collar so that the internal mic points to the sound source
   • Insert the headphone into the monitoring port to monitor

Receiver (RX)

1. USB Digital Output Mode
   • USB-C device
   • Insert the receiver to the USB-C device
   • You can choose to whether insert the headphone to monitor or not based on your needs
2. USB-A device
   • Connect the receiver and USB-A device via the USB C-USB A adapter
   • You can choose to whether insert the headphone to monitor or not based on your needs
3. Lightning device
   • Connect the receiver and Lightning device via the USB C
   • lightning adapter(Please purchase USB C-Lightning adapter by yourself)
   • You can choose to whether insert the headphone to monitor or not based on your needs
4. 3.5mm Analog Output Mode
   • 3.5mm TRS camera
   • Mount the receiver to the camera through the cold shoe mount
   • Connect the receiver and camera via 3.5mm TRRS-TRRS audio cable or 3.5mm TRS-TRS audio cable (Please purchase 3.5mm TRS-TRS audio cable by yourself) Some cameras are not compatible with 3.5mm TRRS-TRRS audio cable, it’s necessary to purchase 3.5mm TRS-TRS audio cable by yourself
   • USB devices
   • Work with USB devices via corresponding adapter (Please purchase adapter by yourself)

Specification

Interface

| TX: 3.5mm

RX: USB-C & 3.5mm

Charging Case: USB-C

Battery

| TX: 95mAh 3.8V RX: 90mAh 3.7V

Charging Case: 1000mAh 3.7V

Charging Time

| TX: 2 Hours

RX: 2 Hours

Charging Case: 4 Hours

Standby Time

| TX: 5 Hours

RX: 5 Hours

Charging Case: 3 times for two transmitters and one receiver charged simultaneously

Net Weight

| TX: 14g RX: 20g

Charging Case: 167g

Dimension

| TX: 20x53x21 mm RX: 33x76x13 mm

Charging Case: 96x99x37 mm

Operating Temperature| 0℃ ~ 50℃
Storage Temperature| -20℃ ~ 60℃

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>