KXD Classic A11 Smart Phone User Guide
- September 12, 2024
- KXD
Table of Contents
Quick Start Guide
A11
Classic A11 Smart Phone
Thank you for your choosing
Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
For more information,visit our official
website:www.kxdmobiles.com
About Dual SIM:
Dual 4G SIM is offered by select telecom operators and may not be available in
all regions.
Supports dual nano-SIM cards.When using both SIM card slots,either card can be
set as the primary card.
VoLTE is only supported by telecom operators in certain regions.
System may be automatically updated for optimal network performance.For
details,please refer to the system version in use on the device.
Please do not insert non-standard SIM cards into the SIM card slot.They may
damage the SIM card slot.
WARNING:Do not disassemble this device.
Special precautions must be taken to safely dispose of this product.This
marking indicates that this product may not be discarded with other household
waste in the EU.
To prevent harm to the environment or human health from inappropriate waste
disposal,and to promote sustainable reuse of material resources.
Please recycle responsibly.
To recycle your device safely,please use return and collection systems or
contact the retailer where the device was originally purchased.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Additional safety information and precautions can be accessed at the following
link:www.kxdmobiles.com.
Important Safety Information
Read all safety information below before using your device:
Use of unauthorized cables,power adapters or batteries can cause fire
explosion,electric shock,pose other risks,or damage the device.
This devices operating temperature range is 0 ℃ ~ 35 ℃,Using this device in an
environment outside of this temperature range may damage the device.
If your device is provided with a built-in battery, to avoid damaging the
battery of the device,do not attempt to replace the Battery by yourself.
Charge this device only with the included or authorized cable and power
adapter,Use only authorized accessories which are compatible with your device.
After charging is complete,disconnect the adapter from both the device and the
power outlet.Do not charge the device for more than 12 hours.
The battery must be recycled or disposed separately.from household waste.
Mishandling the battery may cause fire or explosion Dispose or recycle the
device，battery，and accessories according to your local regulations.
Do not disassemble,hit,crush,or burn the battery.lf the battery appears
deformed or damaged,stop using it immediately.
Do not short circuit the battery,as this may cause overheating,burns,or other
injury.
Do not place the battery in a high-temperature environment.
Overheating may cause explosion.
Do not disassemble,hit,or crush the battery,as this may cause the battery to
leak,overheat,or explode.
Do not burn the battery,as this may cause fire or explosion.
User shall not remove or alter the battery.Removal or repair of the battery
shall only be done by an authorized repair center of the manufacturer.
Keep your device dry.
Do not try to repair the device yourself,If any part of the device does not
work properly,contact KXD customer support or bring your device to an
authorized repair center.
Connect other devices according to their instruction manuals, Do not connect
incompatible devices to this device.
For AC/DC adapters, the socket-outlet shall be installed near the equipment
and shall be easily accessible
Safety Precautions
Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments.
Do not use your phone at petrol stations or in any explosive atmosphere or
potentially explosive environment,including fueling areas,below decks on
boats,fuel or chemical transfer or storage facilities,or areas where the air
may contain chemicals or particles such as grain,dust,or metal powders Obey
all posted signs to turn off wireless devices such as your phone or other
radio equipment.Turn off your mobile phone or wireless device when in a
blasting area or in areas requiring”two-way radios”or electronic devices to be
turned off to prevent potential hazards.
Do not use your phone in hospital operating rooms,emergency rooms,or intensive
care units.Always comply with all rules and regulations of hospitals and
health centers.lf you have a medical device,please consult your doctor and the
device manufacturer to determine whether your phone may interfere with the
device’s operation.To avoid potential interference with a pacemaker,always
maintain a minimum distance of 15cm between your mobile phone and the
pacemaker.This can be done by using your phone on the ear opposite to your
pacemaker and not carrying your phone in a breast pocket.
To avoid interference with medical equipment,do not use your phone near
hearing aids,cochlear implants,or other similar devices.
Observe all aircraft safety regulations and turn off your phone on board
aircraft when required.
When driving a vehicle,use your phone in accordance with relevant traffic laws
and regulations.
To avoid being struck by lightning,do not use your phone outdoors during
thunderstorms.
Do not use your phone to make calls while is is charging.
Do not use your phone in places with high humidity,such as bathrooms.Doing so
may result in electric shock,injury,fire,and charger damage.
Security Statement
Please update your phone’s operating system using the built-in software update
feature,or visit any of our authorized service outlets.Updating software
through other means may damage the device or result in data loss,security
issues,and other risks.
Legal lnformation
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
Usability of this device may be restricted depending on the network provider.
Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a
radius of 20 km from the centre of Ny-Alesund.
Disclaimer
This user guide is published by KXD or its local affiliated
company.Improvements and changes to this user guide necessitated by
typographical errors,inaccuracies of current information,or improvements to
programs and/or equipment,may be made by KXD at any time and without notice.
Such changes will, however, be incorporated into new online editions of the
user guide(please see details at
www.kxdmoblies.com). All illustrations are for
illustration purposes only and may not accurately depict the actual device.
CE Warning
- Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- Adapter shall be installed near the equipment and shall be easily accessible.
- The operating temperature of the EUT can’t exceed 25℃ and shouldn’t be lower than 0℃.
- The plug considered as disconnect device of adapter.
- The device complies with RF specifications when the device used at 0mm from your body.
- The product shall be connected to a Type C interface/ USB interface of version USB2.0 or higher.
- According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE),, Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.
Hereby, Shenzhen Kenxinda Technology Co., Ltd. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.
| ES| LU| FAO| CZ| FR| HU| SI
---|---|---|---|---|---|---|---
DK| HR| BE| BIG| DE| EE| 1E
EL| IT| Cy| DI| LT| SK| MT
NIL| AT| PL| PT| F1| SE| TR
NO| CH| IS| LI| | |
Frequency band| Max. output power(dBm)
---|---
BLE| -0.27(EIRP)
EDR| 4.6 (EIRP)
WiFi| 15.77 (EIRP)
5G WiFi| 16.89 (EIRP)
GSM 900| 32.69(conducted)
DCS 1800| 28.58 (conducted)
WCDMA Band| 21.87 (conducted)
WCDMA Band VIII| 22.68 (conducted)
LTE Band 1| 22.11(conducted)
LTE Band 3| 23.02 (conducted)
LTE Band 7| 20.81 (conducted)
LTE Band 8| 23.83 (conducted)
LTE Band 20| 23.10 (conducted)
LTE Band 40| 22.89 (conducted)
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This
device was tested for typical body-worn operations with the back of the device
kept 10mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a appropriate separation distance
between the user’s body and the back of the device. The use of belt clips,
holsters and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be avoided. Use only
the supplied or an approved antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>