IKRA IEBV 3000 Leaf Blower Leaf Vacuum Instruction Manual
- July 9, 2024
- IKRA
Table of Contents
IEBV 3000
Original instructions
Leaf Blower / Leaf Vacuum BDAN_74010000_V4
IEBV 3000 Leaf Blower Leaf Vacuum
|
---|---
|
|
|
TECHNICAL DATA
Leaf Blower / Leaf Vacuum | IEBV 3000 |
---|---|
Rated voltage | 230-240 V ~ |
Frequency | 50 Hz |
Rated input | 3000 W |
Idling speed | 8000-14000 min-1 |
Air speed max | 240 km/h |
Air volume flow max | 10 m3/min |
Chopping rate | 10 : 1 |
Collection bag capacity | 45 l |
Weight | 2,8 kg |
Noise details
Measured according to 1) EN 50636-2-100; 2) 2000/14/ EG; Uncertainty K = 3
dB (A) Wear ear protectors!
Sound pressure level LpA 1)| 84,3 dB (A)
Sound power level LWA 2)| 106 dB (A)
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN
50636-2-100, Uncertainty K = 1,5 m/s2
Vibration emission value ah| 3,702 m/s2
Technical changes reserved.
WARNING: The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the exposure level over
the total working period.
The vibration emission level will vary because of the ways in which a power
tool can be used and may increase above the level given in this information
sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the
times when the tool is shut down or when it is running but not actually in
use. This may significantly reduce the vibratory load over the total working
period.
Identify additional safety measures to protect the operator from the effects
of vibration such as maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
SAFETY INSTRUCTIONS
WARNING
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concer- ning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
Local regulations may stipulate the minimum age of the user.
Keep children and other persons including animals in a safe distance when
using the appliance. Minimum safe distance is 5 m.
Read and understand the operating instructions before using the appliance.
Familiarise with the control elements and how to use the appliance properly.
Abide by all the safety measures stated in the service manual. Act responsibly
toward third parties. The operator is responsible for accidents or risks to
third parties.
Do not allow persons unfamiliar with the power tool or these instructions to
operate the power tool.
WARNING
Wear personal protective equipment.
- Always wear goggles when using the machine.
- Wear ear protectors!
- Wear solid shoes and long trousers.
- Do not wear loose clothing or jewels. Hear, clothing and gloves must be out of reach of moving parts as they could get caught by the rotating parts. Do not use the appliance when barefooted or in open sandals.
Provide adequate lighting or good lighting conditions when working with the
machine. Poor lighting/light conditions represent a high safety risk.
Do not use the appliance in bad weather, especially when there is a risk of
storm.
Do not use the appliance if you are tired, ill, under influence of drugs,
alcohol drinks or medicaments.
Do not overreach. Keep proper footing and balance at all times.
Walk! Never run!
Be careful when going backwards – risk of tripping!
Provide a safe posture, especially on slopes.
Despite the observance of the operating instructions there still may be some
hidden residual risks.
CAUTION
Gefahr durch Stromschlag!
Never operate the apparatus if a cable, the mains cord or plug are damaged.
Damaged mains cords pose a hazard of electrocution. To avoid danger, a damaged
mains supply pipe must be replaced by the manufacturer.
CAUTION
Damage to health arising from vibrations to hand and arms if the device is
used for a long time or if the device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection against white finger
disease or carpal tunnel syndrome.
Therefore, it is necessary to carefully check the state of your fingers and
wrist if you have regularly used the appliance for a long time.
If any symptom of the diseases above appears, seek medical advice immediately.
To reduce the white finger disease risk, keep your hands warm and take regular
breaks during your work.
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the running unit may cause
hearing damage. Wear ear protectors!
When working with the device, a certain level of noise cannot be avoided.
Noisy work should be scheduled for hours, during which it is allowed by
statute or other local regulations. Adhere to any applicable rest times and
limit your working time to the necessary minimum time. For your personal
protection and the protection of people nearby, suitable hearing protection
must be worn.
Please do also consider any local regulations concerning noise protection!
DANGER!
This machine generates an electromagnetic field when operated. This field can
affect active or passive medical im-plants in certain circumstances. In order
to reduce the risk of severe injury or death, we recommend that people with
medical implants consult their doctor or the manufacturer of the medical
implant before operating the machine.
WARNING
Risk of injury by rotating impeller.
-
Keep your hands in safe distance.
Never use the machine with a damaged cover or protective device or without cover or protective devices. -
Unplug the machine before any work on it.
-
Wait until all rotating parts have stopped and the appli-ance has cooled down.
Check the work area before using the appliance.
Remove any hard objects such as stones, shards of glass, wires, etc. that
could be thrown off, knocked back or that could otherwise cause injury or
damage during appliance operation.
Never use the appliance when the proper equipment is not fitted. Operate the
leaf vacuum using only the nozzle and the connected collection bag. Do not use
this leaf blower near fire places or BBQ places and open fire, ash pits, etc.
A proper use of the leaf blower contributes to fire spread avoidance.
Do not put any objects on the lance blow openings.
Make sure the blown material is not being blown at persons, animals, glass
sheets or solid objects such as trees, cars, walls, etc. Strong air flow could
throw off stones, dirt or rods or they could be bounced off the ground and
injure persons, animals, break glass sheets or cause other damage.
Never use the appliance to disperse chemicals, fertilisers or other
substances.
By this, you will avoid toxic material spread.
The appliance must not be used if damaged or safety equipment is defective.
Replace any worn-out and damaged parts.
Check all screw and plug-in connections and protective equipment if firm and
tightened properly and whether all moving parts are running smooth whenever
the appliance is to be put into operation.
The protective equipment on the appliance is strictly prohibited to be
disassembled, changed, used in conflict with the designation and it is
prohibited to attach any protective equipment of other manufacturers.
Stop the device and disconnect it from the power supply
- whenever you leave the lawnmower
- before removing blockages
- efore checking, cleaning or working on the device
- after contact with a foreign object, to check the device for damage
If the appliance starts abnormally vibrating, switch the engine off and search
for the cause immediately. Generally, vibrations are a warning against
operating failure.
When being blocked, turn the appliance immediately off and remove the jammed
item.
The appliance must be stored in a dry place and protected from frost.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool.
SYMBOLS
| Warning/caution!
---|---
| WARNING! Please read the instructions carefully before starting the
machine.
| Warning against thrown-off items Do not let other persons get near due to
fo-reign objects being thrown off. Minimum safe distance is 15 m.
| Unplug the machine before any work on it.
| Unplug the mains plug if the cable becomes damaged or tangled.
| Do not expose the appliance to rain and do not use it in wet or moisture
conditions.
| Wear eye protective goggles ! Wear ear protectors!
| Risk of injury by rotating impeller. Keep your hands in safe distance.
| CE marking
| Class II tool.
| Sound power level
| Any damaged or disposed electric or electronic devices must be delivered to
appropriate collection centres.
SPECIFIED CONDITIONS OF USE
The device has been designed to blow and collect dry leaves and light garden
waste such as dry grass, twigs and dry spruce and pine needles.
Do not use this product in any other way as stated for normal use. Not
observing general regulations in force and instructions from this manual does
not make the manufac-turer liable for damages.
WARNING
Risk of injury
Never use the machine with a damaged cover or protec-tive device or without
cover or protective devices.
MAINS CONNECTION
DANGER!
Operation is only allowed with a safety switch against stray current (RCD
max. stray current of 30mA).
Connect only to single-phase AC system voltage as indicated on the rating
plate. It is also possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
Only plug-in when machine is switched off.
Do not use the appliance in bad weather, especially when there is a risk of
storm.
WARNING
WARNING! Electric shock! There is a risk of an injury caused by electric
shock!
Never operate the apparatus if a cable, the mains cord or plug are damaged.
Insert the plug of the electrical cable in a socket of suitable shape, voltage
and frequency complying with current regulations.
Handle the cord carefully. Hold the plug when unplugging the tool. Never use
the cord to carry the apparatus. Keep cord away from heat, oil, sharp edges or
moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of electric
shock and may create a fire.
Use extension cables with a maximum length of 5 meters and with a cable cross-
section of not less than 1.5 mm .
Use of extension cables of different length and cross-section and also of
adapters and multiple sockets should be avoided. When operating a power tool
outdoors, use an extension cord suitable for outdoor use.
MAINTENANCE
DANGER!
Unplug the machine before any work on it. Wait until all rotating parts have
stopped and the appliance has cooled down.
Keep the device, in particular the air vents, clean at all times. Never spray
water on the device body! Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of the user. The
manufacturer will not be liable for any such damage.
Please contact our service department if you need accessories or spare parts.
Only a regularly maintained and treated appliance can serve as a satisfactory
aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may only be performed by
qualified authorised staff.
DISPOSAL
If your device should become useless somewhere in the future or you do not
need it any longer, do not dispose of the device together with your domestic
refuse, but dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according collecting/recycling
point.
By doing so, plastic and metal parts can be separated and recycled.
Information concerning the disposal of materials and devices are available
from your local administration.
EC DECLARATION OF CONFORMITY
ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
explains the following conformity according to EU directives and norms for
the following product
x| 2006/42/EG| x| 2000/14/EG+2005/88/EG
Annex V Annex VI
---|---|---|---
x| 2014/30/EU
| 2017/656/EU| Noise: measured LWA| 97,2 dB (A)
x| 2011/65/EU| Noise: guaranteed LWA| 106 dB (A)
Normen / Standard References:
EN 60335-1:2012/A15:2021
EN 50636-2-100:2014
EN 62233:2008
EN IEC 55014-1:2021| EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A2:2021
EN IEC 63000:2018
---|---
Seriennummer von 3518200000001 bis 3518299999999
Münster, 17.07.2023
Aufbewahrung der technischen Unterlagen:
Yi Zhou, Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
IKRA Warranty conditions
Warranty period:
IKRA provides a warranty for a period of 2 years in accordance with the
following conditions for defects in IKRA products that are proven to be due to
a manufacturing or material defect within the warranty period. The warranty
period begins with the purchase, so that the date on the original purchase
receipt is decisive.
Warranty provider:
ikra GmbH, Schlesier Straße 36, D-64839 Münster-Altheim, Germany (hereafter
referred to as IKRA)
Area of validity:
The warranty is only intended for consumers. A consumer (hereafter referred to
as the purchaser) is any natural person who concludes a legal transaction for
purposes that are predominantly attributed neither to commercial activities
nor to self-employed work-related activities. The warranty is valid for IKRA
products purchased within the EU.
No restriction of the legal rights of the purchaser:
The purchaser’s warranty claims arising from the purchase contract with the
seller as well as statutory rights are not affected by this warranty, the
claiming of the aforementioned rights is free of charge.
The warranty shall not apply or shall expire in the following cases:
- Batteries, chargers and accessories that are due to use or other natural wear
- Demonstration devices / used products
- Defects due to improper or inappropriate use, e.g. commercial use, non-observance of operating instructions, use other than for the intended purpose, lack of maintenance and care
- Defects that arise from the use of incorrect accessory parts
- Defects due to external influences, e.g. transport damage, weather damage, impact or breakage
- IKRA products on which modifications or additions have been made or which have been completely or partially dismantled
- Defects caused by incorrect voltage (mains voltage), e.g. when used abroad
- Repairs with non-original parts (original spare parts can be found here: www.ikra.de/ersatzteile/)
- Use of force, deliberate overloading of the motor
Repairs under warranty may only be carried out by authorised workshops,
otherwise the warranty shall be voided. Service addresses can be found at
www.ikra.de/serviceadressen.
Enforcement of the warranty (warranty claim):
If the product does not function during the warranty period or does not
function as intended for use, this is a warranty claim.
The competent IKRA partners are available to the purchaser for advice and
assistance during the entire warranty period and can check to what extent a
replacement part can remedy the defect without sending for repair.
Important spare parts can be found in the first part of the operating
instructions after the assembly diagrams under “Spare parts / accessories”. On
the back of these operating instructions you will find the contact details in
the respective countries.
Shipping costs incurred from or within countries other than Germany, as well
as customs and import duties, shall be borne by the purchaser. The laws of the
Federal Republic of Germany shall apply to this contract, with the exception
of the UN Convention on the International Sale of Goods (CISG).
SERVICE
Latest service adresses can be found under:
www.ikra.de
BGR8 Ltd. c/o Seabourne Group
Service.GB@ikra.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>