DOSS SoundBox H200 Home Speaker User Guide

DOSS SoundBox H200 Home Speaker User Guide

For updates, promotions, and experience sharing, join our customer community.

Packing content

• 1 x SoundBox H200
• 1 x Type-C charging cable
• 1 x User Manual

Specifications

• Output: 50 W
• DC power input: 5V/2A
• Battery : 7.4 V=4500 mAh
• Unit net weight : 2.9 kg
• Charge time: 4.5hrs
• Frequency response: 40Hz-20KHz
• Unit dimension: 15.7 x 3.6 x 5.3 inches
• Play time: Up to 35 hours (50% volume)
• Bluetooth distance: Up to 20m/66ft
• Warranty: One-year limited

Important notes before using

• To prolong the lifetime of the battery, fully charge the speaker before the frst time using it
• The battery isat a low level when the front indicator flashes red rapidly.
• The speaker will automatically power off after 15 minutes without audio input
• You can press and hold the Bluetooth and pawer button for 2 seconds to disable this function.
• When all buttons can’t be controlled, try to press and hold the play/pause and
• power buttons for 2 seconds to restore the factory settig.
• If you need any assistance while using this speaker, please feel free to contact customer service at support@dossav.com.

Buttons and control

audio modes.
| Press and hold for 2s| Enter/exit TWS pairing
| Press and hold 2s| Disable the prompt sound
| Press and hold 2s| Disable/enable the battery saver function
| Press and hold 2s| Restore factory setting

LED indication

| Flashing blue| Bluetooth pairing
---|---|---
Solid Blue| Bluetooth paired
Solid red| AUX mode
Solid green| TF card mode
Flashing green| USB drive mode
Solid white| Coaxial audio mode
Flashing white| TWS pairing
Solid white| TWS paired
Flashing green| Maximum volume
| Flashing red| Low battery level
Solid red| Charging
Light off| Fully charged

Connections

1. 2. 3. AUX in (not supplied)

2. TF card (not supplied)

Bluetooth mode

1. 1. Place your speaker and the device within 1 meter away.
2. Press the power button for 2 seconds to turn the speaker on. The speaker will enter Bluetooth pairing mode and flash blue.
3. Turn on Bluetooth on your device and choose Sound Box H200 in the list.
4. If the pairing is successful, the LED will change to solid blue.

TWS (True Wireless Stereo) mode

1. Turn on both speakers.
2. Select a speaker as the primary speaker. Press and hold the button and the indicator light will flash white rapidly.
3. Once paired, the LED of the primary speaker turns solid white, while the second speaker turns slowly flashing white.
4. Find ” Sound Box H200 ” on your Bluetooth device and connect it.

Note: APE format is not supported in TWS mode.

Use your speaker with Echo Dot

You can connect the Dot with the speaker by Bluetooth.

Please follow the steps to set up via Bluetooth:

1. Download the Alexa app and follow the standard setup procedure to get the dot connected to your home Wi-Fi network.
2. Switch the Sound Box H200 to Bluetooth mode.
3. Run the Alexa App, tap Menu, and then tap Settngs.
4. Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
5. The Sound Box H200 should appear in the list of Bluetooth devices. If not, please long press the Bluetooth button and try it again.
6. Once listed, tap on the speaker to complete the pairing process.
7. To remove the device, return to Bluetooth > tap the name of speaker > tap “Forget Device”

Safety instructions

• Avoid dropping or hittng the speaker.
• Avoid exposing to extreme temperature.
• Avoid using the speaker near a microwave.
• Never disassemble or repair the speaker.
• Never use any corrosive cleanser/oil to clean.
• Never leave the speaker in a car parked in the sun.
• Never attempt to charge the speaker while it is wet.

Notice
This product complies with the radio interference requirements of the European Community.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

Notice

@dossav/@dossfans
@dossdirect
www.dossaudio.com
  1-833-275-3677 Mon-Fri 9AM-5PM PT (USA)
Customer Service Email:
US: support@dossav.com
CA: support_ca@dossav.com
UK: support_uk@dossav.com
DE: support_de@dossav.com
FR: support_fr@dossav.com
ES: support_es@dossav.com
IT: support_it@dossav.com
JP: support_jp@dossav.com

UK| REP| EVATOST CONSULTING LTD
Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY contact@evatost.com
---|---|---

We simply act as UK representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

EU| REP| eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
---|---|---

OST EU 20220119000015
We simply act as EU representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product.
In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>