MORRIS CIW-10741 Combi Washer Dryer User Manual

: June 1, 2024
: MORRIS

Table of Contents

MORRIS CIW-10741 Combi Washer Dryer
Product Information
Product Usage Instructions
FAQs
Safety precaution
Overview of Washing Machine
Install Washing Machine
Operate Washing Machine
Maintenance
Troubleshooting
Appendix
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MORRIS CIW-10741 Combi Washer Dryer

MORRIS-CIW-10741-Combi-Washer-Dryer-image

Product Information

Specifications

Model Number: CIW-10741
Product: Combi Washer Dryer
Washing Capacity: 10kg
Drying Capacity: 7kg
Voltage: 220-240V/50Hz
Rated Power: 1950W
Drying Power: 1700W
Water Pressure: 0.05-0.8MPa
Outer Dimension (WDH)mm: 595625850

Product Usage Instructions

Safety Precaution

WARNING: To reduce the risk of fire, electric shock, or injury, follow basic precautions provided in the manual.

Installation

Install Washing Machine

NOTE: It is recommended to have a qualified technician install the washer. If installing yourself, carefully follow the provided instructions.

Tools Needed:

Spanner for bolt removal and adjustment

Unpacking:

Check for any damage during transportation and ensure all items are received. Contact the dealer if damage or missing items are found.

Select the Location:

Select a rigid, dry, and level surface for installation. Do not place the washer on a carpeted floor.

Remove Transit Bolts:

Loosen the four transit bolts with a spanner.
Pull each bolt head through the wide part of the hole.
Fill the holes with supplied plastic covers.

Operation

Leveling: Ensure the washing machine is level to prevent vibration during operation. Adjust the bottom of the machine if needed.

FAQs

Q: What should I do if my washing machine is not working properly?
- A: Check the power supply, water connections, and drainage system. Refer to the troubleshooting section of the manual for further guidance.
Q: Can I use bleach in the washer?
- A: Yes, you can use bleach in the designated bleach compartment following the manufacturer’s instructions.

“`

CIW-10741
COMBI WASHER DRYER

Please read this manual carefully before use this product

Model number Serial number Date of purchase

Products Specification

Parameter Washing Capacity Drying Capacity
Model
Voltage Rated Power Drying Power Water Pressure Outer Dimension (WDH)mm

Inverter Motor Series 10kg 7kg
CIW-10741
220-240V/50Hz
1950W 1700W 0.05-0.8MPa 595625850

NOTE:
1. All the pictures in the manual are used for schematic only. It may be different from the machine you buy.
2. The actual function and the data in kind prevail.
1

Safety precaution

WARNING
To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following
· If the power cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid the hazard.
· The new hose-sets supplied with the washer are to be used and that old hosesets should not be reused.
· This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. (This warning is not for EUROPEAN market)
· This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. (This warning is for EUROPEAN market)
· Carpet does not obstruct the opening for washing machine with ventilation openings in the base.
· Children of less than 3 years should be keep away unless continuously supervised.
· This appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops offices and other working environments; – farm houses – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments; – areas for communal use in blocks of flats or launderettes.
· Take care that power voltage and frequency shall be identical to those of washing machine.
· To ensure your safety, power cord plug must be inserted into an earthed socket. Check carefully and make sure that your socket is proper and earthed reliably.
· Do not use any socket with rated current less than that of washing machine. · Do not operate your washer when parts are missed or broken. · Never pull out power plug with wet hands.
2

Safety precaution
· Replace immediately worn power cord, loose plugs/power sockets. · Unplug your washer before cleaning or making any repair. Please check whether the water inside the drum has been drained before opening the door .Please do not open the door if there is any water visible. · Glass door may be very hot duing the operation. Keep kids and pets far away
from the washer during the operation. · Make sure that the water and electrical device must be connected by a qualified
technician in accordance with the manufacturer’s instruction and local safety regulations. · Before operating this machine, all packages and transit bolts must be removed. Otherwise, the washing machine may be seriously damaged while washing the clothes. · Flammable and explosive or toxic sovents are forbidden. Gasoline and alcohol etc. Shall not be used as detergents. Please only select the detergents suitable for machine washing. · Be careful of scald while the washer draining hot washing water. · Never unplug your washer by pulling on the supply cord. Always grasp the plug firmly and pull straight out from the outlet. · If your old appliance is not being used anymore, we recommend that you remove the door and cut off the supply cord. · Packing materials may be dangerous to the kids. Please keep all packing materials (plastic bags, foams etc) far away from the kids. · Do not climb up and sit on top cover of the machine. · Pets and kids may climb into the machine. Check the machine before every operation. · Do not lean against the door of the washer. · The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted. · Do not dry unwashed items in the tumble dryer (IEC 60335-2-11). · Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer. · Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. · Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
3

Important Hints
· The household washing machine isn’t intended to be built-in. · This washing machine is for indoor using only. · Make sure that all pockets are empty. Sharp and rigid items such as coin, brooch,
nail, screw or stone etc. May cause serious damages to the washer. · Please remember to disconnect water and power supply immediately after the
clothes are washed. · The washing machine shall not be installed in bath room or very wet rooms as
well as in the rooms with explosive or caustic gases. · Before washing the clothes at first time. the washing machine shall be operated in
one round of the whole procedures without the clothes inside. · Do not repair or replace any part of the washer unless you have been specifically
recommended in the user-repair instructions and you have the knowledge and skills to make it. · It is forbidden to wash carpets and bras inset with steel wire. · Never refill water by hand during washing. · After the program is completed, please wait for two minutes to open the door. · When handing the machine, the accumulated water shall be drained out of the machine firstly. Handle the machine carefully. ever hold each protruded part on the machine while lifting. Machine door can not be used as the handle during the conveyance. · The washing machine with single inlet valve only can be connected to the cold water supply. The washing machine with double inlet valves can be connected to the hot water and cold water supply.
· WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
· WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
4

Overview of Washing Machine

Please read this Manual carefully before using the machine. Please properly keep Instruction Manual in case of future need; All figures in this Manual are structural diagrams and your purchased product is subject to actual product model.

Remove transit bolts
Drawer Handle

Control Panel Assembly

Door Assembly

Leg Assembly (4EA)
Drain Hose Clips

Pump Case Cover
Inlet Valve (Cold) Inlet Valve (Hot)

Only double inlet machine have the hot valve
Power Cord
Drain Hose
Transit Bolt (4EA) Back Cover Power Plug
5

Install Washing Machine

NOTE

We recommend that your new washer should to installed by a qualified appliance technician.If you feel that you have the skills to install the washer, please read the installation instructions carefully before installing.

Tools needed

You may need to have the following tools to help you in the installation of your washer:

· Scissors

· Pliers

· Standard

· Gloves

· Spanner

· Screwdriver

Unpacking the washing machine
Unpacking your washing machine and check if is there any damage during the transportation. Also make sure that all the the items (as shown below) in the attached bag are received. If there is any damage to the washing machine during the transportation, or any item is missing or damaged, please contact the local dealer immediately.
*lf washing machine is not double inlet, the machine does not have the hot inlet hose.

Inlet Hose

Hot Inlet Hose

(Connect to cold (Connect to Hot

water supply)

Hole Cover (4EA) (Used to plug
transit bolt holes)

Drain Hose Support Bracket
(Used to loop the end of drain hose)

Spanner (1 .Used to adjust the bottom of the
machine, 2.Remove the transport bolt on the
back of the machine)

Select the location
Before installing the washer,the location characterized as follows shall be selected: – Rigid, dry, and level surface (if not level, please make it level with reference to the
following figure “Adjustable Leg”). – Avoid direct sun light. – Sufficient ventilation. – The ambient temperature shall be between 0-40°C. – The ambient humidity shall be below 95% (When the temperature is 25°C). – Keep far away from the heat resources such as coal or gas. Make sure that the
washer will not stand on power cord. Do not install the washer on the carpet floor.
6

Install Washing Machine

Remove transit bolts
Before using this washing machine. transit bolts must be removed from the backside of this machine. Please take the following steps to remove the bolts:
Keep the transit bolts properly for further use.

1. Loosen the four transit bolts with a spanner

2. Take each bolt head and pull it through the wide part of the hole.Repeat for each bolt.

3. Fill the holes with the supplied plastic covers.

Level the washing machine
Install or place the washing machine under the environmental temperature of not
less than 0°C but not outdoors, for it may damage the programming controller.

Base foot structure
Lock nut
Support foot covered with rubber

Factory status
Lockingnut close to bottom of box
Supporting foot close to locking nut

Note: ln order to facilitate installation, the factory status of the foot may not be all
locked, please be sure to lock all four feet before adjusting the level

1. When placing the machine, check whether the bottom foot is in the factory state. if not, please restore the bottom foot to the factory state: the locking nut is locked tightly on bottom of the box. and the support foot is locked tightly on the locking nut:

2.After the machine is placed, press the opposite corner of the top cover plate of the washing machine with both hands in turn and shake it vertically downward to check whether the supporting foot is close to the ground and whether the machine is shaken

3.To ensure that the machine is placed in the right state, loosen the locking nut according to the direction shown in the diagram with the attached spanner to the appropriate height until the supporting foot is close to the ground and the machine is free from shaking
Support base is close to the ground

4.Finally,use the spanner to turn the lock nut back to thebottom of the box to lock it(you can also slightly fix the support foot by hand to avoid the support foot moving again)
Ensure that the supporting feet do not move again

1. The machine must be perfectly leveled and stabilized when the four supporting feet are close to the ground. Lower the feet as much as possible on the basis that the machine is leveled.
2. lmproper leveling adjustment may cause loud noise, machine vibrating, machine displacement and other abnormal phenomena.
3. Air-vent is designed on the bottom of the machine (prevent blockage). Install the washing machine on solid, smooth and skid-proof ground. Do not place the washing machine on soft blanket or wooden floor, or various desktops and stands, in case of unnecessary injury.
7

Install Washing Machine
The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose.
Connect the inlet hose
Connecting to a threaded watertap

1. Connect the water hose to the water tap, and then turn the connector clockwise as shown.

2. Connect the other end of the water hose to the inlet valve on the back of the washing machine. Turn the hose clockwise to tighten.

3. Open the water tap and check if there are any leaks around the connection areas. If there are water leaks, repeat the steps above.

Connecting to a non-threaded water tap

1. Remove the adaptor(A) from the water hose(B).

2. Use a Phillips screwdriver to loosen four screws on the adaptor.

3. Hold the adaptor and turn part(C) in the arrow direction to loosen it
by 5mm(*).

4. Insert the adaptor onto the water tap, and then tighten the screws while lifting the adaptor.
5. Turn part(C) in the arrow direction to tighten it.
8

6. While pulling down part(D) on the water hose, connect the water hose to the adaptor. Then,release part(D). The hose fits into the adaptor with a clicking sound.
7. To complete connecting the water hose, see 2 and 3 on the “Connecting to a threaded water tap” section.

Install Washing Machine
NOTE
· If there is any leakage with hose after the connection, then repeat the steps to connect inlet hose.
· Do not bend the hose. · Check for inlet hose connection carefully
before using the washer each time.
Connect the drain hose
· The drain hose shall be placed at a height of 65-100cm above the floor, otherwise, it can cause poor drainage.
· You can use the supplied drain hose support bracket to loop the drain hose down into the wall, standpipe or laundry tub.
· Take care to ensure all hose connections are tight.
NOTE
· The end of the drain hose cannot be immersed in water for the washer to work properly.
Connect the power
· As the maximum current through the unit is 10A when you are using its heating function, please make sure the power supply system (current, power voltage and wire) at your home can meet the normal loading requirements of the electrical appliances.
· Please connect the power to a socket which is correctly installed and properly earthed.
· Make sure the power voltage at your plate is same to that in the machine’s rated voltage.
· Power plug must match the socket. · Do not use multi-purpose plug or socket as extension cord. · Do not connect and pull out plug with wet hands. · When pulling out the plug, hold the plug tightly and then pull it out. Do not
pull power cord forcibly. · If power cord is damaged or has any sign of being broken, special power
cord must be selected or purchased from its manufacturer or service center for replacement.
9

Install Washing Machine
WARNING
1. This machine must be earthed properly. If there is any short circuit, earthing can reduce the danger of electrical shock.
2. Washing machine shall be operated in a circuit separate from other electrical appliances. Otherwise, power protector may be tripped or fuse may be burned out.
Operate Washing Machine
NOTE
Ensure your machine is installed properly before use.
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this: 1. Connect power source and water. 2. Put a little detergent (about 10g) into the drawer and close it. 3. Press the On/Off button. 4. Turn the knob to be ” Cottor” program. 5. Press the Start/Pause button. This will remove any water from the manufacturer’s test run remaining in the machine.
Sort clothes
Please read this recommendation carefully to avoid the troubles of washing machine and damages of clothes. 1. Do not put clothes over load the rated capacity. 2. Sort the laundry by colour and by care label. Most garments
have a textile care label in the collar or side seam. 3. Make sure all the pockets are empty, Foreign objects (e.g.
nails, coins, paper clips, etc.) can cause damage to garments and components in the machine. 4. Close any zips, fasten hooks etc. before washing. 5. For clothes to be washed, they should be sorted according to color. Dark clothes should not be washed with light clothes especially. 6. Badly soiled areas, stains etc. should be pre treated with liquid detergent, stain removers etc. 7. Turn over the clothes which pill easily and is with woolen surface before putting them into the machine.
! NOTE:Make sure that no clothes is caught between the door and the seal.
10

Operate Washing Machine

Put detergent
· Pull out the detergent drawer.
· Add detergent for prewash into compartment I. Used only for prewash programs.
(option 1: detergent that is solid; option 2: detergent that is liquid.)
· Add detergent for main wash into compartment II. (optionl: detergent that is solid; option2:detergent that is liquid.)
· Add fabric softener into compartment .
· Please choose suitable type of detergent for the various washing temperature to get the best washing effect with less water and energy consumption.
· The amount of detergent/softener used should be added only once at a time. Please refer to the manufacturer’s instructions for the dosage of detergent/softener.
· Excessive detergent will produce a lot of foam, easy to overflow, and will affect its dissolution, resulting in rinsing difficulties.

Detergent Release(automatically release) Use Liquid Detergent (Automatically) You could add liquid detergent in box before washing. During operation, washing machine would add liquid detergent automatically according to the weight. lt can achieve manually add once, smartly, accurately and automatically add for several times. Use Washing powder or Softener (Manually) If you would like use washing power or softener,
please push the button to close automatically add function.( The LED indicator will now be OFF)
Choose non-foaming or low-foaming
detergent, which are suitable for front loading washing machines.

Every time put once washing machine quantity, which could refer to manual.
Over-loading washing powder could generate a lot of bubbles .It causes difficulties for washing because of the influence of powder’s dissolution.

liquid detergent box: liquid detergent
softener box: liquid softener washing powder box:
powder or liquid detergent

11

Operate Washing Machine

NOTE

1. At the first time using liquid detergent and automatically release function, please operation “Quick 15′” program to washing tube and drum.
2. It is normal that a few liquid detergent flow into down-water box when pulling liquid detergent box. Please avoid pull the box frequently to decrease the cost of liquid detergent.
3. The quantity of softener please refer to manual. Over-loading softener would destroy artificial fiber.
4 Liquid level do not over the MAX of Distributor box.
5. Please dilute the thick softener or bleach first and then release in distributor box.

Washing steps

Connect inlet hose and turn on the tap

Insert power Plug

Place drain hose

Open the door, put in clothes and shut it down; put detergent in detergent case and close the case;

Dry Only Wash&Dry60′ Air Wash Allergy Care Bedding Intensive Mix Rinse+Spin

Cotton Quick 15′ ECO 40-60
20oC Delicate Down Jacket Drum Clean
Spin

Press down power key
Press down Start button

Customize settings like delay time, temperature, spin rate other Settings, etc.

Select program as needed

· Press Power On/Off to turn on the washing machine. · Turn the Cycle Selector to select a cycle. · Change the cycle settings (Temperature and Speed, etc.) as necessary. · Set Time Delay if you want to finish the wash cycle at the desired time. · Press Start/Pause. To change the cycle during operation · Press Start/Pause to stop operation. · Select a different cycle. · Press Start/Pause again to start the new cycle.
12

Operate Washing Machine
Control panel

The following illustration is a simple example of the model control panel. The illustration is for reference only. Please refer to the actual effect.

Dry Only Wash&Dry60′ Air Wash Allergy Care Bedding Intensive Mix Rinse+Spin

Cotton Quick 15′ ECO 40-60
20oC Delicate Down Jacket Drum Clean
Spin

01 Cycle Selector 02 Display 03 Dry 04 Spin 05 Temp. 06 Delay 07 Start/Pause

Turn the dial to select a cycle.
The display shows current cycle information and estimated time remaining, or an information code when a problem occurs.
Press down to select drying mode. Four optional drying modes are cyclically switched. The selected drying mode is displayed on the display.
Press to change the spinning speed for the current cycle. Available spin speed depends on the cycle. The selected spin speed will be displayed on the display.
Press to change the water temperature for the current cycle. Available temperature range depends on the cycle. The selected temperature will be displayed on the display.
Press Delay repeatedly to cycle through the available Delay options (from 3 to 24 hours in one hour increments).
Press to start or pause operation. Press the button once to start a cycle. To pause operation, press the button again. You may change the cycle settings and options. To resume paused operation, press the button again.

08 Power

Press to turn on or off the washing machine. If you turn on the washing machine and do not use it for 10 minutes, it will turn off automatically.

13

Operate Washing Machine
Delay
You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 3 to 24 hours (in 1 hour increments). The hour displayed indicated the time the wash will finish. 1. Select a cycle. Then change the cycle settings if necessary. 2. Press Delay repeatedly until a desired end time is set. 3. Press Start I Pause .
The corresponding indicator turns on with the clock running. 4. To cancel the Delay, restart the washing machine by pressing Power . Real-life case You want to finish a two-hour course 3 hours later from now. For this, you add the Delay option to the current cycle with the 3-hour setting, and press Start I Pause at 2:00 p.m. Then, what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m.
Child Lock
To prevent accidents by children, Child Lock locks all buttons except for Power . · To activate or deactivate the Child Lock function, press and hold Temp. and Spin simultaneously for 3 seconds.
When Child Lock is activated, the indicator lights up.
Alarm Off
You can turn on or off the sound of the cycle selector and all buttons. To turn on or off the sound, press and hold Spin and Dry simultaneously for 3 seconds. When the sound is off, the indicator lights up.
Door Lock
When the door is not closed or locked normally, the icon is not bright; Lock the door correctly, the icon is always bright.
Reload
Long press the Start/Pause button for 3 seconds. After the lock is unlocked, the function of adding clothes in the middle can be started.
14

Operate Washing Machine
Washing Rinse Spin Dry When the corresponding washing process is reached, the icon flashes.
Spin Icon Continuously adjustable, press each time, dehydration mode is “no dehydration (not shown)/ 400/600/800/1000/1400 cycle”. Different procedures allow different speeds of dehydration.
Dry Icon Continuously adjustable, press each time, The drying mode is switched between
“standard””Heavy””Damp””Timing” and “no drying”.
Because computer control board program Settings are different, not all washing programs can be set drying function.
“Standard” – Dry program for general clothes; “Heavy” – You can directly wear clothes after Dry Program;
“Damp” – You need to dry clothes in the air after Dry program
“Timing” – Set Dry time as actually needed.
Programe
Dry Only: For drying general clothes.
Wash&Dry60′: Wash and dry for 60 minutes.
Air Wash: For clothes that need to remove odors and wrinkles.
Allergy Care: Featuring a high-temperature wash and extra rinses to help remove the remaining detergent effectively.
Bedding: This procedure is suitable for washing heavier clothes. Jeans, bedding, etc.
Intensive: For heavily soiled items. The operation time is longer than other cycles.
15

Operate Washing Machine
Programe
Mix: For mixed load consisting of cotton and synthetic.
Rinse+Spin: Featuring an additional rinse process after applying fabric softener to the laundry.
Cotton: For cottons, bed linens, table linens, underwear,towels, or shirts. The washing time and the rinse count are automatically adjusted according to the load.
Quick 15′: For lightly soiled garments in less than 2.0 kg that you want to wash quickly.
ECO 40-60: For cleaning normally soiled cotton items which are declared to be washable at 40°C or 60°C, together in the same cycle. This cycle is used to assess the compliance with the EU Ecodesign legislation. This cycle is set as a default.
20°C: New European standard special procedures, used for washing some gentle clothes, the temperature can only choose 20°C, protective clothing. Delicate: For sheer fabrics, bras, lingerie(silk),and other handwash-only fabrics. For best performance, use liquid detergent.
Down Jacket: Suitable for washing down fabrics.
Drum Clean: Cleans the drum by removing dirt and bacteria from it. Make sure the drum is empty. Do not use any cleaning agents for cleaning the drum.
Spin: Featuring an additional spin process to effectively remove moisture from laundry.
Steam function: Steam function is activated automatically, if you select one of [Allergy care], [Bedding], [Intensive] programs along with washing temperature higher than 30oC.
16

Operate Washing Machine

Table of Washing Procedures
· Washing efficiency and performance is determined by used detergent quality. Use only machine wash approved detergent.
· If need use specific detergent, e.g. for synthetic and woolen fabric. Mind always detergent manufacturer recommendations.
· Do not use dry cleaning agents such as trichloroethylene and similar products. Choose the best detergent.

Program
Cotton Quick15f ECO 40-60 20°C Delicate Dowm Jacket Drum Clean Spin Dry Only Wash&dry60′ Air wash Allergy care Bedding Intensive Mix Rinse+Spin

Weight (kg)

Rinse

Dry

10

7

2

0.5

–

5

0

5

2.5

4

2.5

0

10

7

0

7

0.5

0

3

5

3

8

4

10

7

5

3

10

7

Spin (r/min)
0/400/600/800/1000/1400 0/400/600/800/1000 0/400/600/800/1000 0/400/600 0/400/600/800 0/400/600/800 800
0/400/600/800/1000/1400 0/400/600/800/1000/1400
1400 –
0/400/600/800/1000/1400 0/400/600/800/1000/1400 0/400/600/800/1000/1400
0/400/600/800/1000 0/400/600/800/1000/1400

Temp. (°C)
(–)/20/30/40/60/95
(–) 60 20 (–)/20/30/40 (–)/20/30/40 60/95 (–) (–)/20/30/40/60 (–)/20/30/40/60 (–)/20/30/40/60 (–)/20/30/40 (–)

Dry option (Selectable)

If using liquid detergent, it is not recommended to activate the time delay.
We recommend by using: Laundry powder 20°C to 95°C; Wool detergent 20°C to 40°C; *Choose 95°C wash temperature only for special hygienic requirements.

· Do not add powder detergent if the liquid detergent is not used out, otherwise it may cause foam spillover and wash difficulties due to excessive detergent;
· The washing time and effect of each program can be well controlled for clothes with slight dirt; add more detergent, take out some clothes or select program with longer operation time (Intensive, Cotton, etc.) if the clothes are too dirty.
· Some programs have cloth weight aware function and display “- -” in timing area and then display time in 2~3 minutes after weighing;
· This machine has eccentric protection function to distribute and disperse clothes, so actual washing time is prolonged, this is normal;
· Do not touch the machine during Dry program in case of scald!(Suitable for dryers)

17

Operate Washing Machine
Precautions for dry function
Textile not suitable for drying · Textile with No Dry label; · Textile with wool and cashmere, in case of shrinkage; Fine textile (like silk), in case of crinkling; · Textile with polymer rubber or similar materials; · Textile processed by flammable solvent (like detergent and oil), in case of explosion; · Dripping clothes will cost electricity and time and has bad drying effect.
Precautions for drying · The weight of drying clothes must exceed the max rated drying capacity wh
using drying function, otherwise it may cause bad drying result; · Bad drying result may be caused due to unsmooth water inlet and low water
pressure; · Divide drying clothes into batches if its weight exceeds the max rated drying
capacity; · Confirm if the clothes are suitable for drying, do not mix-drying clothes with
different materials; · Dry clothes made from special materials (such as cotton/fabric/down
jacket/underwear etc.) after select according washing program; · Select according max spin rate of hand-washed clothes to improve drying
performance and shorten drying time; · Auto dewatering program will be proceeded when drying grog ram starts,
displaying time varies from clothes distribution; proper adding and reducing clothes can improve drying performance; · The left drying time is approximate time, it may be shortened or prolonged according to clothes with different materials or drying degrees; · The clothes may shrink or deforms according to different materials and constituents of the clothes after drying; · Do not touch or open the door during drying in case of scald; · Open the door after drying, take out the clothes (especially clothes with met zips) before they are cooled in case of scald; · Drying time refers to selected time or auto awareness time by program; · The machine dries clothes based on the principle of condensation; It needs inlet or drain water repeatedly so to improve drying performance. It does not belong to machine failure!
18

Operate Washing Machine
Approximate textile weight reference(dried)

Underwear (Cotton, about 50g)

Towel (Cotton, about 70g)

T shirt (Cotton, about 150g)

e Shirt (Cotton, about 200g)

Socks (Blending, about 50g)

Diaper (about100g)

Long-sleeve underwear (Cotton, about 150g)

Work clothes (about 600g)

Common textile drying guide

Recommended Drying Program for Common Textile

Textile type

Recommended Recommended Recommended washing program drying program drying Qty

Tips

Down Jacket Down Jacket

Sweater and silk

Wool

Bedding

Cotton

Standard —
Heavy

1pcs —
2 pcs

One down jacket + cold tumble dry, to keep it fluffy and smooth
The textile is fragile under high temp, do not dry.
The textile is easy to be twisted, this can make it completely dry.

Shirt

Quick 15r

Damp

4pcs

Airing to keep it damp for ironing

Thermal underwear
Underwear, sleepwear
Outerwear (spring and autumn)
Outerwear (winter)

Underwear Underwear
Cotton Cotton

Kid

Allergy Care

Sports
Towel, bath towel
Jeans

Mix Cotton Jeans

T shirt

Cotton

Heavy Standard Standard
Heavy Standard Standard Standard Standard Standard

3pcs 5pcs 5pcs 2 pcs 4~10pcs 5pcs 4~8pcs 4~10pcs 4~15pcs

The textile is thick, heavy drying can make it completely dry.
The drying effect is the best with under qty.
The drying effect is the best with under qty.
The textile is thick, heavy drying can make it completely dry.
The drying effect is the best with under qty.
The textile is fragile under high temp. Use cold dry.
The drying effect is the best with under qty.
The drying effect is the best with under qty.
The drying effect is the best with under qty.

Warm prompt

Select ” Wash&Dry60″‘and the washing and drying process will take 60 minutes. To ensure the drying effect, it is recommended to wash two shirts or clothes less than
0.5 kg.

19

Operate Washing Machine

Introduction of Other Functions

Unlock of emergency door (not applicable in some models)

If you want to take out the clothes when there is a long-time power cut, make sure the water level in the drum is below the safe level, the temperature is under 40°C, and the inner drum is does not rotate, then detach the drain hose and lower it, replace the hose after water runs out;
Open the drain pump cover at the bottom right of the front side, pull down the rod lightly, when hearing a light sound then open the door and take out or put in the clothes;
Replace drain pump cover; This method can only be used in emergency.

Emergency pull on the rorpe

Auto Dispensing (not applicable in some models)
This machine can dispense the laundry detergent automatically. When you want to use the powder detergent by yourself, please turn off the combination button to stop this function;
When you start the machine, if the indicator light shows full, it means the detergent is abundant; when the washing finishes, if there is only one bar of the light left, and it shows “” for the service time, it means the detergent is running out, then you need to add the detergent.
Before the washing, you can put the detergent in the detergent case, then the machine will dispense the detergent according to the weight of the clothes in the process of washing automatically.”
Please find the process table for further information of the default state for this function.

Resume Function This machine has the resume function in case of power-down. If there is a power
failure or plug loose in the process of machine, the machine can remember the working status and resume work when the power is restored.
Memory Function (not applicable in some models) This machine can remember the latest working process automatically. When you
turn on the machine again, the machine remembers the washing process and the settings you made last time (it means the whole working process of the latest washing will be selected by default when the machine starts)

Cloth Weigh Awareness In the beginning of the washing, the machine will estimate the weight of the clothes
and dispense the detergent automatically (on condition that there is enough detergent in the case), then decide the amount of the water accordingly to achieve the goal of saving water.

20

Operate Washing Machine
Unbalance Protection When the machine is ready to spin, The washer may take a few time to balance
clothes due to great unbalance. If clothes is still unbalance in the drum after that, the spinning speed can be slow
down to avoid great vibration. If clothes in drum is too less, the machine may not to spin due to the unbalance
protection, then you should add more clothes in the machine to make it to spin. Sprinkling (not applicable in some models) This machine adopts detergent auto dispensing technology; water will flow out from
the detergent case to delivery detergent into inner drum. It will also spray water on the glass of observation window, which has better effect of cleaning the foam and stains on the clothed and window. This will make washing process cleaner and construct a high efficient, water-saved and clean washing environment! Drum lamp (not applicable in some models) At the beginning of the program, at the end of the program and at the pause of the washing state, the lamp of the washing machine cylinder will be lit. You can observe the situation of the clothes in the washing machine and feel the fun of smart laundry.
Note: Due to the product model upgrade, the function configuration may be different
from this description, please take the actual model function as the standard!
Circuit Diagram
21

Maintenance

Serviceable range
· Your washing machine is designed for home use; · Your washing machine can only wash machine-washable clothes; · Your washing machine can only be connected to cold water tap, please
select household low-foam detergent and care agent suitable for machine wash sold on the market; · Steel wire lined in clothes will pop up during washing. In order to protect your machine and clothes, please do not wash clothes with steel wire in the machine; · Cut off water and electricity every time after washing; · The service environment conditions are as follows; · Environment temperature: 4-40°C; · Relative humidity: below 95% (at the temperature of 25°C); · Keep pets away from the machine; · Children or the elderly should use the machine with the company of a guardian; · Install and use the machine in the room with floor drain; · Do not wash carpets in the machine; · Adopt Y connection to connect power cord and plug the power cord into a three pin socket with ground lead, and make sure the socket is grounded.
Notice: Beware of electric shock!
· Unplug power cord or cut off power before maintenance; · Do not use chemical solution in case of explosion.
Clean exterior body and control panel
· Wipe with a soft and wet cloth; · Do not use detergent with abradant · Sweep away detergent residue immediately after leaning; · Do not clean the machine by spraying water on it.
Clean interior drum
· Open the door and keep it dry; · Rust: remove it with chloride-free detergent rather than a steel wire ball.
Clean detergent drawer
The structure of detergent case varies from different machine models; please follow steps and methods shown in below figure to clean the detergent case:
22

Maintenance

a.

b.

c.

d.

Auto dispenser

Common dispenser

If there is detergent or softener residue in the case: As fig. a(c) shows, pull the case and press down the limit rod; pull the whole drawer out;

As fig. b(d) shows, open the case (pick it up slowly)and take out syphon plate(lift it up);

Use tap water or brush to wash detergent case and syphon pipe; Restore case cover and syphon pipe, and push the drawer in.

A little detergent will flow into water box when drawing the case, this is normal.

Try not repeatedly opening and closing the case of detergent loss;

Pay attention to the spillover of detergent that may cause inconvenience when adjusting (like tilting and moving, etc.) the machine (draw out the case before

adjusting).

Recovery from freezing
The washing machine may freeze when it drops below 0°C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4. Pour warm water into the drum and leave it for about 10 minutes. 5. Reconnect the water hose to the water tap.
NOTE
1. When the washing machine is reused, make sure the ambient temperature is above 0°C.
2. If your washing machine is located in the room where it can get frozen easily, please drain the remaining water inside drain hose and inlet hose thoroughly.
3. Please contact a technician if your washer is frozen.

23

Maintenance
Caution: Beware of scald!
· Maintain the machine after the hot water is cooled in case of scald;
· Turn off the tap!
Outlet pump cleaning(twice a year is recommended)

Tear down outlet pump protective cover with a blade or a coin as shown in the figure;

Unscrew the pump cover (beware of water residue) and take out clothes residue and clean it up completely until the blade can rotate freely;

Fit on the pump cover and screw it to make sure there is no water leakage as shown in the figure. Put on the protective cover!

Inlet filter cleaning(twice a year is recommended)

Turn off the tap, take apart the inlet hose and clean the filter with a brush;

Unscrew the inlet hose in the back of the machine and pull out the filter with a nipper plier; restore it after cleaning;

Reconnect it with inlet hose and turn on the tap to check if there is a leakage.

24

Troubleshooting

Common failure analysis and elimination method
It may not be failure when below circumstances occur.
Please check and confirm according to below list before sending for maintenance. It is confirmed to be a failure, please contact our after-sales service department instead of repairing by yourself. Please unpluq power cord and turn off the tap before checking to ensure safety.

A little water left in the drain hose and the machine for first time of use
The machine does not operate

Normal, water left in delivery inspection.
Is electricity cut off or power abnormal? Power cord correctly plugged into the socket? Power fuse or current breaker in good condition? Power switch pressed down? water tap turned on? Is reservation set? “Start/Pause” key pressed down?

No operation of keys

Is “Child-Lock” function set? Press “Start/Pause” key before selecting otherfunctions after the machine is started.

Water leakage of tape

Is the tap shape appropriate? Inlet hose connector installed well? Water tap damaged?

Abnormal sound

Is the machine tilted and shaking? Are there coins, zips or other foreign matters? Is it caused by buttons or zips?

No water inflows or inflows too slowly

Is the tap turned on? water supply cut off? Inlet valve blocked? (clean Inlet valve) Water tap and inlet hose freezed? Preservation function selected? “Start/Pause” key pressed? Bent of inlet hose? Water pressure over low?

Water outflows while inflowing

Is installation height of drain hose lower than 65 cm? Is drain hose mouth soaked in water?

Bad washing effect

Is detergent dosage appropriate? Is selected program correct?

The machine washes slowly

Does clothes volume exceed standard washing capacity?

The machine stops during operation

Is electricity or water supply suddenly cut off? Is “Start/Pause” key pressed down?

25

Troubleshooting

The machine does not dewater
Noisy, vibrating and displaced while dewatering
Bad dewatering effect
No water outflows or outflows too slowly
Reservation timeout but washing unfinished

It takes a while to dewater after setting dewatering time. Are clothes twisted or knotted?
Noisy, vibrating and displaced while dewatering placed stable? (adjust supporting legs to make it stable) Are clothes twisted or knotted? Does the machine crash other objects? Is there foreign matters dropped in?
Dewatering effect varies from different clothes.
Is the drain hose bent, blocked or freezed? Is the installation height of drain hose 100cm higher than the ground? Is the filter blocked?
Offset of clothes during washing; Bad inlet and outlet conditions prolongs washing time

Information codes

DISPLAY

MEANS

Inflow timeout

Outflow timeout

Lock failure Spillover alert

SOLUTIONS
Check if the tap is turned on, water pressure is too low or water failure; If the failure still exists, please contact us for maintenance.
Clean drain pump filter, check if the drain hose is blocked; if the failure still exists, please contact us for maintenance.
Reclose the door; if the failure still exists, please contact us for maintenance.
Continue running after auto draining water to washing water level; if the failure still exists, please contact us for maintenance.

Motor failure

Please contact us for maintenance.

Heating pipe failure Thermal sensor failure

Please contact us for maintenance. Please contact us for maintenance.

26

Troubleshooting
Unmatched software/ hardware on mainboard and frequency inverting plate
Frequency inverting plate communication failure
Frequency inverting plate failure
Drying fan failure
Drying heater failure
Thermal sensor in drying air outlet failure
Thermal sensor in drying air inlet failure
Drying module communication failure
Dewatering failure in drying starting stage, operation holds and alarms
The procedure running is not corresponded to the cycle that the knob points.

Please contact us for maintenance.
Please contact us for maintenance.
Please contact a technician.
Please contact a technician.
Please contact a technician.
Please contact a technician.
Please contact a technician.
Please contact a technician.
Overload eccentric force, please scatter clothes or add some clothes; restart Dry program after adding clothes; if the failure still exists, please contact us for maintenance. Turn the cycle selector to the cycle corresponded to the procedure working on.

Note: Please refer to the actually purchased model for fault display here. Different models have different fault displays.
27

Appendix

Fabric Care Lable
Resistant material Delicate fabric Item may be washed at 90°C Item may be washed at 60°C Item may be washed at 40°C
Item may be washed at 30°C Item may be hand washed Dry clean only Can be bleached in cold water
Do not bleach Can be ironed at 200°C max Can be ironed at 150°C max

Can be ironed at 100°C max Do not iron
Can be dry cleaned using any solvent Dry clean with perchloride,lighter fuel, pure alcohol or R113 only Dry clean with aviation fuel, pure alcohol or R113 only Do not dry clean Dry flat Can be hung to dry
Dry on clothes hanger
Tumble dry, normal heat
Tumble dry, reduced heat Do not tumble dry

Clothes sorting
· Do not exceed the rated washing capacity; · Take out all foreign matters in the clothes, such as clip, coins and so on, in case
of clothes and machine damage; · Knot the tie, button up, zip up and sew the clothes. Put small items (like
handkerchief, gloves, socks, etc.), twisted and wearable clothes into washing net before washing. The clothes in the net should not be more than 400g and be washed along with other clothes; · Mix small clothes and big clothes together; · Close the door and do not place the clothes between the door and sealing ring.
Put sorted clothes
· Sort clothes according to the washing information provided by manufacturer, such as washing labels, textile types, color and regulated washing temperature, etc.
· Check if the clothes color fades for the first time of washing; · Do not put clothes into the machine for a long time, which may go moldy and
produce spot.Please wash in time. · Please wash clothes according to regulated temperature, otherwise it may cause
color change or deformation; · Do not wash water-proof clothes or products (such as ski suit, rain coat and
curtain, etc.)
28

Appendix
Electrical Warning
To avoid fire, electrical shock and other accidents, please remember the following reminding: – Only the voltage indicated in power label can be used. If you are not clear of the
voltage at home, please contact the local power bureau. – When you are using the heating function, the maximum current through the
washing machine will reach 10A. Therefore,please make sure the power supply units(current,voltage and cable) can meet the normal laod requirements for the machine. – Protect the power cord properly. Power cord shall be fixed well so that it will not trip the people or other things and be damaged. Special attention shall bepaid to the plug location. – Do not make the wall-mounted socket overloaded or cable extended. – Over loading of the wiring may cause fire or electrical shock. Do not pull out power plug with wet hand. – To ensure your safety, power plug shall be inserted into an earthed socket. Carefully check and ensure that your socket is properly and reliably earthed.
Protecting the environment
· The washer is manufactured by recyclable materials. If you decide to dispose of this washer,please observe the local waste disposal regulations.Cut off the power cord so that the washer cannot be connected
· to power. Remove the door so that small animals and children cannot get trapped inside the washer.
· Do not exceed the detergent quantities recommended in the detergent manufactures, instruction.
· Use stain removal products and blesches before the wash cycle only when strictly necessary.
· Save water and electricity by only washing full loads(the exact amount depends upon the program used).
· Correct Disposal of this Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal,recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.They can take this product for environmental safe recycling.
29

Appendix
NOTE:
1. The energy efficiency rating was tested under “EC040-60 (For washing cycle)” and “Wash&Dry For wash and dry cycle)” procedure.
2. Scan the QR code shown on the energy label for further product information. 3. When the washing machine gives error codes, make sure you contact our
after sales team to repair. We shall not be responsible for any issue caused by unauthorized repair. 4. In case you need to order the accessories, we can send out within 15 working days after the request. 5. For the purpose of improving the performance of the whole washing machine, the appearance and specifications shall be changed without addtional notice. 6. The display panel shall show “END” for 10 minutes after the cycle finish.
30

Products Fiche

CIW-10741

Category Name Rated Capacity (kg)

EC040-60 100%Load 50%Load

25%Load

20°C

Cotton 95°C

Wool

Quick Wash

Intensive

10.0

5.0

2.5

5.0 10.0 2.5

2.5

10.0

Program Duration (h:min)
Energy Consumption (kWh/cycle)
Water Consumption (L/cycle)

3:59 0.867 70.0

3:00 0.536 48.0

3:00

0:50 2:19 0:44 0:18

2:08

0.263 0.210 1.490 0.120 0.050 0.800

41.0

44.0 69.0 58.0 36.0

50.0

Max Temperature (°C)

33

31

23

20

76

20

17

50

RMC (%)

53.90

53.90 83.0 72.0 78.0 90.0

75.0

Spinning Speed (rpm)

1400

600 800 400 800

800

31

Products Fiche

Supplier’s name or trade mark: MORRIS

Supplier’s Address:

Model Identifier: CIW-10741

General Product Parameters:

Parameter

Value

Parameter

Value

Rated Capacity (kg)

Rated Capacity

7.0

Rated washing 10.0 capacity

Dimensions in cm

Energy Efficiency Index

EEIW EEIW

51.9 82.0

Energy efficiency class

Washing Efficiency Index

lw

1.031 Rinsing effectiveness

Jw 1.031

(g/kg dry textile)

Energy consumption in kWh per cycle, for the washing cycle of the household washer-dryer, using the ECO40-60 programme at a combination of full and partial loads. Actual energy consumption will depend on how the appliance is used.
Water consumption in litre per cycle, for the ECO40-60 programme at a combination of full and partial loads. Actual water consumption will depend on how the appliance is used and on the hardness of the water.

0.513 51

Energy consumption in kWh per cycle, for the wash and dry cycle of the household washer-dryer at a combination of full and half loads. Actual energy consumption will depend on how the appliance is used.
Water consumption in litre per cycle, for the wash and dry cycle of the household washer-dryer at a combination of full and half loads.Actual water consumption will depend on how the appliance is used and on the hardness of the water.

Maximum temperature inside the treated textile(°C) for the washing cycle of the household washer dryer, using the ECO40-60 programme.

Rated Capacity
Half
Quarter

33

Maximum temperature inside the treated textile (°C)

for the washing cycle of the

31 household washer-dryer, using the wash and dry

23 cycle.

Height

85

Width 62.5

Depth EEIW EEIWD
IR JR

59.5 A 5.0 5.0

4.196

96

Rated Capacity

32

Half

29

32

Products Fiche

Spin speed (rpm)

Rated capacity
Half

1400 1400

Weighted remaining moisture content(%)

Quarter 1400

ECO40-60 programme duration (h:min)

Rated capacity

3:59 Spin-drying efficiency

Half

3:00 class

Quarter 3:00

Airborne acoustical noise emissions during the spinning phase for the ECO40-60 washing cycle at rated washing capacity(dB(A) re 1 pW)

76

wash and dry cycle duration (h:min)

Type

free-standing

Airborne acoustical noise emission class for the spinning phase for the ECO40-60 programme at rated washing capacity

Off-mode (W) (if applicable)

0.50

Standby mode (W) (if applicable)

Delay start (W) (if applicable)

4.00

Networked standby (W) (if applicable)

Minimum duration of the guarantee offered by the supplier: 2 years

This product has been designed to release silver ions during the washing cycle

NO

53.9

Rated capacity

10:50

Half 6:40

–

33

Products Fiche

PARAMETER Rated capacity for the washing cycle, at 0,5 kg intervals (c)

UNIT kg

DECLARED VALUE
10.0

Rated capacity for the wash and dry cycle, at 0,5 kg intervals (d)

kg

7.0

Energy consumption of the EC040-60 programme atrated washing capacity (EWfull)

kWh/cycle

0.867

Energy consumption of the EC040-60 programme athalf of the rated washing capacity (EW, ½)

kWh/cycle

Energy consumption of the EC040-60 programme ata quarter of the rated washing capacity (EW, ¼)

kWh/cycle

Weighted energy consumption of the EC040-60 programme(Ew)

kWh/cycle

0.536 0.263 0.513

Standard energy consumption of the EC040-60 programme(SCEW)

kWh/cycle

0.988

Energy Efficiency Index of the washing cycle (EEIW)

–

51.9

Energy consumption of the wash and dry cycle atrated capacity (EWD full)

kWh/cycle

5.306

Energy consumption of the wash and dry cycle at halfrated capacity (EWD

kWh/cycle

2.531

Weighted energy consumption of the wash and dry cycle(EWD)

kWh/cycle

4.196

Standard energy consumption of the wash and dry cycle(SCEWD)

kWh/cycle

5.115

Energy Efficiency Index of the wash and dry cycle(EEIWD)

–

82.0

Water consumption of the EC040-60 programme atrated washing capacity (WW, full)

L/cycle

70.0

Water consumption of the EC040-60 programme athalf of the rated washing capacity (WW, ½)

L/cycle

48.0

Water consumption of the EC040-60 programme ata quarter of the rated washing capacity (WW, ¼)

L/cycle

41.0

Weighted water consumption of the washing cycle (Ww)

L/cycle

51

34

Products Fiche

Water consumption of the wash and dry cycle atrated capacity (WWD, full)
Water consumption of the wash and dry cycle at halfrated capacity (W WD, ½))
Weighted water consumption of the wash and dry cycle(WWD)
Washing efficiency index of the EC040-60 programme atrated washing capacity (lW)
Washing efficiency index of the EC040-60 programme athalf rated washing capacity (lW)
Washing efficiency index of the EC040-60 programme atquarter rated washing capacity (lW)
Washing efficiency index of the wash and dry cycle atrated capacity (Jw)
Washing efficiency index of the wash and dry cycle at halfrated capacity (JW)
Rinsing effectiveness of the EC040-60 programme atrated washing capacity (lR)
Rinsing effectiveness of the EC040-60 programme athalf rated washing capacity (lR)
Rinsing effectiveness of the EC040-60 programme atquarter rated washing capacity (lR)
Rinsing effectiveness of the wash and dry cycle atrated capacity (JR)
Rinsing effectiveness of the wash and dry cycle athalf rated capacity(JR)
Programme duration of the EC040-60 programme atrated washing capacity (tW)
Programme duration of theEC040-60 programme athalf rated washing capacity (tW)
Programme duration of the EC040-60 programme atquarter rated washing capacity (tW)
Cycle duration of the wash and dry cycle atrated capacity (tWD)
Cycle duration of the wash and dry cycle athalf rated capacity (tWD)