DOSS WB10BLK SoundBox Pro Wireless Bluetooth Speaker User Guide

June 1, 2024
Doss

DOSS WB10BLK SoundBox Pro Wireless Bluetooth Speaker User Guide

Packing content

  • SoundBox Pro x 1
  • SoundBox Pro x 1
  • USB-C charging cable x 1
  • User manual x 1

Specifications

Bluetooth version: V5.0 Range: 20 m/66ft Output: 10W x 2
Input: 5V=1A
Battery: Li-ion 3.7V=2200mAh
Weight: 500g
Unit dimension: 7.74 x 2.94 x 2.95 inches Play time: 20 hours ( at 50% volume ) Warranty: One-year

Product overview

Buttons and controls

. Indicators

Pairing your device via Bluetooth

  1. Enable Bluetooth on your device and search for the
  2. Select SoundBox Pro on the Bluetooth
  3. Once paired, you can see the connected status on your
  • The speaker will auto power off after 15 minutes without any media To remove the function, please contact support@dossav.com for support.
  • The music volume will drop down 15% automatically when the speaker is on low battery.

Having problems connecting?

  • Make sure that your device is within 1 meter from the
  • Press and hold the Play/Pause button for 5 seconds. Still have problems? Contact DOSS customer service at support@dossav.com for

Play music from a Micro SD card

Play in download order
Support capacity: 128G or less
Support format: MP3, WAV, FLAC

How to set up true wireless stereo pairing

Start the first speaker

Turn on the speaker; press and hold the ADD bu�on for 3s.

Start the second speaker

  • Turn on the speaker

Stereo paired

  • The speaker with the left led on is the The speaker with the right led on is the Secondary.

Warning

DO NOT drop, hit or shake the speaker.
DO NOT disassemble, repair or modify the speaker by yourself.
DO NOT use cleaning products that contain benzene, solvents or alcohol.
DO NOT expose the speaker to excessive heat or direct sunlight for a long time. DO NOT store the speaker in a place with humidity or dust.
DO NOT place heavy objects on top of the speaker.
DO NOT use the speaker near a microwave oven or wireless LAN products

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving
  • Increase the separation between the equipment and
  • Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals