DOSS WB526 Extreme Boom Pro Portable Outdoor Speaker Owner’s Manual
- June 1, 2024
- Doss
Table of Contents
- DOSS WB526 Extreme Boom Pro Portable Outdoor Speaker
- Product Information
- Product Usage Instructions
- Packing content
- Specifications
- Important notes before using
- Buttons and control
- LED indications
- Connections
- Bluetooth mode
- PartySync mode
- Use your speaker with Echo Dot
- Safety instructions
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DOSS WB526 Extreme Boom Pro Portable Outdoor Speaker
Product Information
Specifications
- Output power: 40W2+10W2
- DC power input: 5V 3A
- USB output: 5V 2A
- Battery: 10400mAh
- Charge time: 4.5hrs
- Playback time: 20hrs (at 50% volume – Hotel California)
- Bluetooth range: up to 30m/99ft
- Net weight: 7.2lbs/3.24kg
- Unit dimension: 14.256.378.07 inches
- TF card audio format: MP3/WAV/FLAC/APE (Max capacity 256G)
Product Usage Instructions
Important Notes Before Using
- To prolong battery life, fully charge the speaker before first use.
- The battery is low when the 25% LED indicator blinks.
- The speaker will auto-power off after 15 minutes without audio input.
- To cancel auto-power off, press the specified button for 3 seconds simultaneously.
- The USB out is only for charging your device.
- To reset to factory settings, press and hold the reset button for 3 seconds.
FAQs
-
Q: How do I reset the speaker to factory settings?
A: Press and hold the reset button on the back of the speaker for 3 seconds. -
Q: How long does it take to fully charge the speaker?
A: It takes approximately 4.5 hours to fully charge the speaker. -
Q: Can I connect multiple devices to the speaker via Bluetooth?
A: Yes, the speaker can pair with 2 devices simultaneously, but it can only play music from one device at a time.
Packing content
- 1 x Extreme Boom Pro
- 1 x USB-C charging cable
- 1 x Strap
- 1 x User Manual
Specifications
- Output power: 40W2+10W2
- DC power input: 5V 3A
- USB output: 5V 2A
- Battery: 10400mAh
- Charge time: 4.5hrs
- Playtime: 20hrs (at 50% volume-Hotel California)
- Bluetooth range: up to 30m/99ft
- Net weight: 7.2lbs/3.24kg
- Unit dimension: 14.256.378.07 inches
- TF card audio format: MP3/ WAV/ FLAC/APE (Max capacity 256G)
Important notes before using
- To prolong the lifetime of the battery, fully charge the speaker before the first time using it.
- The battery is at a low level when the 25% LED indicator blinks.
- The speaker will auto-power off after 15 minutes without audio input.
- To cancel the auto-power off feature, press O M for 3s simultaneously.
- The USB out is only for charging your device.
- Restore the factory setting by pressing and holding O the for 3s simultaneously.
- Press any button to check the battery level while not charging.
- When all buttons can’t be controlled, try to reset the speaker with a paper clip (the reset button on the back of the speaker).
- If you need any assistance while using this speaker, please feel free to contact customer service at support@dossav.com.
Buttons and control
LED indications
Connections
Bluetooth mode
- Enable the Bluetooth feature on your device.
- Find “Extreme Boom Pro” on the Bluetooth device and connect it.
- Once paired, you can see the status “connected” on your device.
- Press O to re-enter Bluetooth pairing if your device can’t find Extreme Boom Pro in 10 seconds.
- This speaker can pair with 2 devices via Bluetooth simultaneously, but it can only play music on one device at a time. To play from the other connected device, pause the currently playing one first.
TWS (True Wireless Stereo) mode
- Press the on both Extreme Boom Pro to enter into TWS pairing.
- Once paired, the LED of the primary speaker turns solid white, while the second speaker turns to flash white.
- Find “Extreme Boom Pro” on your Bluetooth device and connect it.
- If 2 smart devices are connected, and you want to play via TWS mode, press to enter into TWS pairing, meanwhile, the current playing device will be disconnected.
- In TWS mode, if you want to play via PartySync mode, press to exit TWS mode first.
PartySync mode
- Turn on one speaker and get it paired with your device. Then press and hold for 3s to enter the PartySync mode. The speaker will be the primary speaker and the LED comes solid white.
- Turn on the other speakers) and long press to enter the PartySync mode. The speaker(s) will be the secondary speaker(s) and the LED comes off.
- If 2 smart devices are connected, and you want to play via PartySync mode, press and hold to enter into PartySync pairing, meanwhile, the currently playing device will be disconnected.
- In PartySync mode, if you want to play via TWS, press and hold to exit PartySync mode first.
- The M on secondary speaker can’t be controlled under PartySync mode.
Use your speaker with Echo Dot
You can connect the Dot with the speaker by Bluetooth. Please follow the steps to set up via Bluetooth:
- Download the Alexa app and follow the steps to set up the procedure to get the Dot connected to your home Wi-Fi network.
- Switch the Extreme Boom Pro to Bluetooth mode, you can press the power button to re-enter Bluetooth pairing.
- Run the Alexa app, tap Menu, and then tap Settings.
- Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
- The Extreme Boom Pro should appear in the list of Bluetooth devices. If not, please press the power button and try again.
- Once listed, tap on the speaker to complete the pairing process.
- To remove the device, return to Bluetooth > tap the name of the speaker > tap “Forget Device”
Note: Voice command will not be able to turn on/off the speaker if you connect to it via Bluetooth.
Safety instructions
- Avoid dropping or hitting the speaker.
- Avoid exposing to extreme temperature.
- Avoid using the speaker near a microwave.
- Never disassemble or repair the speaker.
- Never use any corrosive cleanser/oil to clean.
- Never leave the speaker in a car parked in the sun.
- Never attempt to charge the speaker while it is wet.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence-exempt transmitters)/receivers) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
For updates, promotions, and experience sharing, join our customer community.
@dossav /@dossfans
www.dossaudio.com
1-833-275-3677 Mon-Fri 9AM-5PM PT (USA)
Customer Service Email:
- US: support@dossav.com
- UK: support_uk@dossav.com
- FR: support_fr@dossav.com
- IT: support_it@dossav.com
- CA: support_ca@dossav.com
- DE: support_de@dossav.com
- ES: support_es@dossav.com
- JP: support_jp@dossav.com
EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
contact@evatmaster.com
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main, Germany
contact@evatmaster.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>