DOSS SoundBox Wireless Portable Bluetooth Speaker User Manual

DOSS SoundBox Wireless Portable Bluetooth Speaker User Manual

Packing Content

• DOSS SoundBox Wireless Speaker
• USB Type-C Charging Cable
• User Manual

Specifications

1. MODE : Touch to switch among Bluetooth, TF card, and Aux in mode.
2. : In Bluetooth mode/ TF card mode, touch to skip backward.
3. : Play/ Pause and handset button.
   • In Bluetooth mode, touch to answer/ end a call. Touch for 3s to reject a call.
   • Speak into the built-in mic located on the front part of the speaker.
   • In Bluetooth mode, touch to play/ pause music. Touch for 5s to disconnect with your device.
   • In TF card mode, touch to play/ pause music.
4. : In Bluetooth mode/ TF card mode, touch to skip forward.
5. : Volume control button.
   • Clockwise rotation to turn up.
   • Counterclockwise rotation to turn down.
6. : Long press to turn on/ off.
7. : Play via 3.5mm Auxiliary cable (not included). In AUX in mode, audio playback can only be controlled via your device.
8. : Play via TF card. TF card audio format: MP3, WMA, FLAC (Max capacity 32G, format to FAT32 or FAT)/ play in download order.
9. : Type-C charge port.
10. : Charging indicator.

Indicators

Pairing DOSS SoundBox with Your Device

1. Place the speaker and your device within one meter.
2. Turn on the speaker. The center indicator on the top flashes blue.
3. Turn on Bluetooth on your device, and select DOSS SoundBox on the Bluetooth list.
4. Once paired, there’s a prompt tone and the top center indicator will change to steady blue. If the pairing fails, please repeat steps 1 through 3 again.
   • Hold for 5s can disconnect DOSS SoundBox with your device..

Connect DOSS SoundBox to Echo Dot

You are able to connect the speaker to Echo Dot via Bluetooth/ Auxiliary.

1. Download Alexa app and get the Dot connected to your home Wi-Fi network.
2. Keep DOSS SoundBox in pairing status (Press for 5s to keep it in pairing status if it’s already paired with your device).
3. Run the Alexa app, tap MENU and then tap SETTINGS.
4. Tap the Echo Dot in the Alexa app and then tap BLUETOOTH.
5. Select DOSS SoundBox in Bluetooth list. If it doesn’t appear in the list, hold for 5s and try to reconnect.

Product Specifications

Output power: 6W x 2
Driver unit: 1.5 inch driver x 2 + 2.6 inch passive radiator
Frequency response: 100Hz-18kHz
Signal to noise ratio: >=55dB
Unit weight: 560 g
Unit dimension: 6.6 x 2.7 x 2.9 inch
Bluetooth range: 10 meters/ 33ft
Warranty: One-year limited

Battery

Type: Li-ion 3.7V 2200mAh
lnput: 5V 1A
Charging time: 3 hours
Playback time: up to 20 hours (at 50% volume)

• Fully charge the speaker before initial use.
• If the speaker beeps every few seconds, please recharge it for 2-3 hours.
• The speaker has a battery saver mode where it will auto power off without audio inputs for 15 minutes. To remove the function, please contact <support@dossav.com> for support.

Still Got A Problem?

Please feel free to contact our support team at support@dossav.com

Warning

DO NOT drop, hit or shake the speaker.
DO NOT disassemble, repair or modify the speaker by yourself.
DO NOT use cleaning products that contain benzene, solvents or alcohol.
DO NOT expose the speaker to excessive heat or direct sunlight for a long time.
DO NOT store the speaker in a place with humidity or dust.
DO NOT place heavy objects on top of the speaker.
DO NOT use the speaker near a microwave oven or wireless LAN products.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

UK REP
EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR contact@evatmaster.com

EC REP
eVatmaster Consulting GmbH
Bettinastr. 30 60325 Frankfurt am Main,Germany contact@evatmaster.com

For updates, promotions, and experience sharing, join our customer community.

@dossav/@dossfans

@dossdirect

www.dossaudio.com

1-833-275-3677 Mon-Fri 9AM-5PM PT (USA)

Customer Service Email:

US: support@dossay.com
UK: support_uk@dossay.com
FR: support_fr@dossay.com
IT : support_it@dossay.com
CA: support_ca@dossay.com
DE: support_de@dossay.com
ES: support_es@dossay.com
Jp : support_jp@dossay.com

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>