OPTONICA LED TUBE T8 Glass One Side Power City Line Light Instruction Manual
- June 24, 2024
- OPTONICA
Table of Contents
OPTONICA LED TUBE T8 Glass One Side Power City Line Light
FAQ
Frequently Asked Questions
- Q: Can this LED Tube be used in emergency luminaires designed for double-capped fluorescent lamps?
- A: No, this LED Tube is not suitable for use in emergency luminaires designed for double-capped fluorescent lamps.
- Q: What is the contact information for the importer?
- A: IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Dimensions
Features
Specifications
- Not suitable to be used in emergency luminaires designed for double-capped fluorescent lamp(s).
- Suitable for 220-240V
- 50-60Hz operation
- The old starter need to be replaced
- Light distribution
- Temperature
- Warranty
Safety
- Before carrying out any work on the electrical system, turn-off the mains power supply.
- The tubes should be installed only when the mains power supply is off and by qualified and authorized personnel.
- Do not touch the tube while it is on or immediately after it is turned off. Allow to cool before touching the tube.
- Do not cover the tube with paper, cloth or other material.
- Keep the tube away from sources of ignition.
- Ensure that the tube is fitted correctly and firmly.
- Do not touch the inside of the tube with liquid.
- Do not stare directly at the tube, in order to prevent light from damaging the eyes.
- The supplied starter is s fake starter, and should only be used with the LED tube light.
Installation
- Swich of electricity
- Remove all fluorescent lamps
- Remove the starter and install the supplied one
- Insert the LED Tube lamp into the lampholder
- Swich on electricity
- Remove the starter (S) and replace it with the one provided (F). To optomize energy consumption is recomended the removal of any capacitor.
INFORMATION FOR USERS
INFORMATION FOR USERS: in compliance with Directives 2002/95/EC, 2002/96/EC and 2003/108/EC concerning the reductions in use of hazardous substances in electrical and electronic appliances, as well as waste disposal. The symbol shown above, if placed on the product or on its packaging, indicates that the product must be collected separately from other waste at the end of its life cycle. Separate collection of this appliance at the end of its life cycle is organized and managed by the manufacturer and follow the established procedure implemented by the manufacturer to allow separate collection of the appliance that has reached the end of its life cycle.
Proper separate collection for the purpose or forwarding the decommissioned appliance to environmentally friendly recycling, treatment and disposal aids in avoiding possible negative effects on the enviroment and health, and favours re-use and/or re-cycling of the materials that comprise the appliance. Abusive disposal of the product by the holder will result in the application of administrative sanctions as set forth be current standards.
Contact
- IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor;
- Phone: +359 2 988 45 72;
- www.optonicaled.com