DOSS FreeTalk Bluetooth Conference Speakerphone User Manual

June 5, 2024
Doss

DOSS FreeTalk Bluetooth Conference Speakerphone
logo

DOSS FreeTalk Bluetooth Conference Speakerphone

DOSS FreeTalk Bluetooth
Conference Speakerphone pro

Introduction

Thanks for purchasing the DOSS FreeTalk, the Bluetooth Speakerphone. We advise you to read, and follow and keep the following Instrucons to be able to correctly set up the speakerphone and enjoy all of its features to the fullest.

Packing content

  • 1x DOSS Bluetooth Speakerphone
  • 1x Micro USB-C Charging Cable
  • 1x Travel Bag
  • 1xUser Manual

Specifications

  • Input: DC 5V=2A 1 9V=2A
  • Battery: Li-ion 3.7V 1500mAh
  • Charging time: 3 hours
  • TalkTime: 8 hours
  • Unit dimension:5.8 x 5.6 x 1.3 inches
  • Bluetooth version: V5.0
  • Operating distance: s10M, 33ft
  • Warranty: One-year limited

Installation

DOSS FreeTalk Bluetooth Conference Speakerphone fig
1

button and controls

Indicators

Preparation

Use the supplied USB-C cable to charge your speakerphone directly from the cel phone adapter (please make sure its output is 5V=2A). Make sure th at the speakerphone is fuly charged before using it for the frst time The charging indicator will remain RED when charging and be OFF once fuly charged
Note:

  • If the speaker beeps every few seconds, please recharge it for 3 hours
  • The speaker has a buit-in battery saver mode where it will automatically power off if not connect with your device for 10 minutes

Operations

Pair your speakerphone with your smart device or computer via Bluetooth
Power on your speakerphone, and then turn on Bluetooth on your device to choose DOSS FreeTalk in the list. if the pairing succeeds, the Bluetooth indicator light will go solid blue with a clear prompt tone
Note:

  • The speaker will auto turn off after 10 minutes without ay device connection.
  • If your smart device cannot discover the DOSS Free Talk, please long press the
    play/pause button and try to pair again.

Having problems connecting?

  1.  Make sure that your device and computer are within 1meter from the speakerphone.
  2.  Clear the Bluetooth pairing list on your device.
  3.  Restart your speakerphone.
  4.  Try the pairing steps above again.
  5.  Problem still not solved? Contact DOSS customer service at [email protected] for assistance.

Pair your computer with the speakerphone via using a USB-C cable

Turning on the speakerphone, and then please connect the computer and speakerphone via using a USB-C cable.DOSS FreeTalk Bluetooth Conference
Speakerphone fig 5

Wireless charging of mobile phone by speakerphone
When the speakerphone is using the charger to take charge, your mobile phone will be wireless charged by placing it on the phone holder.

Note: If your speakerphone is not charging, the mobile phone can’t be wireless charged when placing it on the phone holder.

Troubleshotting

DOSS FreeTalk Bluetooth Conference Speakerphone fig
7

Warning

  • Do NOT drop, hit or shake the device.
  • Do NOT disassem ble, repair or modify the speaker.
  • Do NOT use cleaning products that contain benzene, solvents or alcohol.
  • Do NOT expose the speaker to excessive heat or direct sunlight for prolonged periods.
  • Do NOT store the device in a place with high humidity or dust.
  • Do NOT place heavy objects on top of the speaker
  • Do NOT use the speaker near a microwave oven or wireless LAN products.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

DOSS

For updates, promotions, and experience sharing, join our customer community Lf @dossav @dosstans @dossdirect www.dossaudio.com [email protected] 1-833-275-3677 Mon-Fri 9AM-5PM PST (USA)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Doss User Manuals

Related Manuals