phrozen Lumii DLP FEPshop 3D Printer Instruction Manual

Lumii DLP FEP shop 3D Printer
Instruction Manual

Dear User,
Thank you for purchasing the Lumii DLP. In order to ensure the optimal printing experience, please follow the step-by-step instructions provided in the manual below.

Introduction

The Toolbox

Opreation

System: Phrozen OS
Operation : 5 inch Touch Panel
Slicer Software: Phrozen DS Slicer, Voxel Dance Tango (Others)
Connectivity: USB | Wi-Fi
Built-in Memory: 2GB
Printing Specifications
Technology: DLP (Digital Light Processing)
Light Source: DLP optical projector
Z Resolution: 10 um
XY Resolution: 51 um
Layer Thickness: 0.01-0.30 mm
Printing Speed: Up to 90 mm/hr
Compatible File Format: PRZ
System Power : Max 96W
Power Requirement : DC 12V : 8A
Hardware Specifications
Printer Size: 23.7 x 23.7 x 42.3 cm
Printing Volume: 13x 7.3x 16cm
Printer Weight : 11.8kg

• All specifications were tested in a laboratory and are subject to change without prior notice. For the latest update, please refer to Phrozen’s official website.
• The included power cord set packaged with the main unit cannot be used with electrical equipment other than the specified device.

Interface Introduction

Lumii DLP is equipped with a new interface and enhanced functionalities.
After turning on the printer, you can access the toolbar on the left side to adjust any relevant settings.

Key Notes Before Start

Stable Printing Environment

Place your 3D printer ina dry and ventilated environment.
Avoid exposure to direct sunlight.
Make sure to place the printer ona flat surface.

Protective Measures

While printing and using resin, please make sure to wear gloves, masks, protective goggles, and long-sleeved clothing.

Maintenance

Clean the Z-axis
First, dry clean the Z-axis T-screw. Then apply a thin layer of general lubricant on it, so that it whirls smoothly.
Clean the 3D Printer
Use sanitizing alcohol and tissue paper to carefully clean the printer, the resin vat, and the building plate.

Initial Startup Procedures

When turning on your 3D printer for the first time, please follow the on- screen instructions on the touch panel to complete the initial tests, including the DLP projector test, z-axis calibration, and first test print.

1. Select the language.
2. Insert a name for your printer.
3. Click on” NEXT” to continue the initial startup procedure.
4. Complete the initial DLP Projector Test.
5. Complete the initial Z-axis Calibration.
6. Complete the first test printing. The system provides a pre-sliced XP Finder test file using the optimal parameters for Phrozen Dental Water-Washable Resin.

• If you use other resin material, please follow section 07 and section 08 to prepare your files and conduct a printing test.

DLP Projector Test

1. Headnote ” Settings ” menu. Click on ” Hardware Testing ” and select the ” DLP Projector Test.”
2. Below are three DLP Projector tests that need to be conducted,
3. Place a sheet of blank white paper on top of the glass screen; then dlick each test to see f the DLP Projector displays the same image as seen on the touch panel,
4. When the projector displays all 3 images dearly, the DLP Projector testis complete.

• Please refer to the actual printer operation based on the touchscreen display.

Zz-axis Calibration

1. Click on TOOLS. Then click on Z-axis calibration.
2. Remove the fessing vat and place 1 piece of A4 paper on the glass screen
3. Install the building plate and tighten the thumb screw: Loosen alt 4calibration screws on the building plate.
4. Click on NEXT .Wait unti the bullding plate touches the glass screen.
5. Tighten all 4 calibration screws. Make sure the paper is unmovable, then click DONE o finish the calibration.
6. Wait unilthe building plate retracts to the top. Z-axis Calibration is now complete.

Prepare Your 3D Files With DS Slicer

Lumii DLP only supports PRZ file format. Use Phrozen DS Slicer software to turn your STL filesinto PRZ files.

Prepare files with Phrozen DS Slicer

1. Choose” Lumii DLP ” printer and select the resin parameters according to the resin used
2. Import your STL files into Phrozen DS Slicer software.
3. DS Slicer provides auto support and orentation functions for preparing various dental indications. Go ‘to ” Support Menu” Select the indicational intend o print, then choose the type, density, and strength for your support, and turn on ‘the ” Auto Rotate ” function.
4. Once the objects are ready to be printed, slice the object by clicking the ” Single para slice ” button located in the bottom right comer.
5. Import your 3D files;
   • Save the sliced PRZ file into your USB drive.
   • Plugin the USB drive in to the 3D printer.
   • Head to ” Print ” > Click on ” USB ” > Select your file > Wait for upload.

https://dental.phrozen3d.com/pages/ds- slicer

| |
---|---|---

Perform Printing Test

1. Install the building plate and resin vat, Make sure that both are parallel to the printer and its surface s clean.

2. Shake the resin bottle for 1 minute. When pouring, make sure the resin does not exceed the mark on theresin vat.

3. The building plate will go down automatically and begin printing.

4. After the printing process begins, the Air Filtration System will turn on automatically.
   (Make sure to first insert the Air Purifier unit).

5. Keep the cover closed during printing to avoid excessive UV light:

6. After the printing process is complete, remove the building plate from the printer, Tilt and place it onto a desk and use a metal scraper to carefully remove your print.

After-sales service & warranty

• Phvozn offers a one year warranty for all parts excluding consumable ‘components such as the DLP projector, building plate, and Resin Vat.

• Lumii DLP Projector is covered under a 12 month warranty.
  Please note that this warranty does not cover any damage caused by human factors.

• If you encounter any difficulties, please scan the QR codes down below to contact us.

contact us

https://support-dental.phrozen3d.com/hc/en-us/requests/new

Congratulations!
You have justcompleted your first run.
We hope you’ve had a great experience!
Please follow us on social media and subscribe to our YouTube channel to learn more dental 3D printing tips from us.

| |
---|---|---
https://phrozen3d.net/IS7ma| https://phrozen3d.net/P0JNH| https://instagram.com/phrozendental?igshid=NTc4MTIwNjQ2YQ==
|
https://dental.phrozen3d.com/| https://lihi1.com/U7iyD

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>