phrozen MEGA CURE UV Curing Lamp User Guide
- October 27, 2023
- phrozen
Table of Contents
UV Curing Lamp
User Guide MEGA CURE
Power Supply & Light Switch
Plug in the power cable
Connect the power cable to the device.| Connect cable to electrical
outlet
Once the power cable has been plugged in, the device will turn on
immediately. To turn off the device, please plug out the power cable.
Set Curing Time
| 
---|---
For Preset Curing Mode
This comes with three curing time settings: 10 min, 30 min, 60 min.| For
Custom Curing Mode
Click on the up and down keys to increase or decrease time by 1 minute. Long
press the keys to quickly increase or decrease the minutes.
How to Operate the UV Curing Lamp
Close the UV lamp cover. Click on the Power button. The curing lamp will begin
operation.
Warning
| 
---|---
The UV lamp needs to be closed completely for the device to begin operation.|
Do not stare at the UV curing lights without closing the UV lamp as this may
cause damage to your eyes.
This appliance can be used by children aged 8 and above as well as by persons with reduced physical, sensory, or mental capabilities, if supervised or given instruction regarding the use of the appliance in a safe way, to ensure that the hazards involved are understood. Children are NOT allowed to play with the appliance.
Children are NOT allowed to clean or provide device maintenance without adult supervision.
Standard Maintenance Procedure
Please use sanitizing alcohol to clean the outside of your device. Do not use
any oily or corrosive liquids to clean the device.
|
---|---
https://lihi1.com/bQ3w0| https://lihi1.com/ScBzV
|
https://lihi1.com/U7iyD| https://lihi1.com/naYk0
Please follow Phrozen’s social media accounts and subscribe to our YouTube
channel to learn more about printing tips and share ideas with one another.
Feel free to contact us if you have any questions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>