PEREL CFAN0342S Floor Fan 16 Inch 40cm with Stand User Manual

PEREL CFAN0342S Floor Fan 16 Inch 40cm with Stand

Product Information

Model: CFAN0342S
This user manual provides important information about the CFAN0342S fan. It includes safety instructions, general guidelines, features, an overview of the product, and assembly instructions.

Safety Instructions:

• Do not use the device when damage to housing or cables is noticed. Contact an authorized dealer for service.
• Ensure that the available voltage does not exceed the voltage stated in the specifications.
• Do not use this fan with a speed-control device or a dimmer.
• Place the fan on a flat and sturdy surface to prevent tipping over.
• Ensure no objects (e.g. curtains) can be sucked into the rear of the fan.
• Do not cover the fan and do not operate it without the grille in place.
• Do not leave the device unattended and keep it away from children and animals.
• Never insert fingers or any other object through the grille when the fan is running.
• Avoid using the fan near inflammable products or in explosive atmospheres.
• Indoor use only. Keep away from rain, moisture, splashing, and dripping liquids. Do not use near baths, showers, or swimming pools.
• Disconnect mains power when the device is not in use. Handle the power cord by the plug only and keep it away from heat, oil, and sharp edges.

General Guidelines:
No information is provided in the manual.

Features:
No information is provided in the manual.

Overview:
The CFAN0342S fan consists of various components:

• Grille ornament
• Front grille
• Grille clamp
• Spinner
• Fan blade
• Grille mounting nut
• Rear grille
• Motor shaft
• Motor housing
• Oscillation knob
• Motor
• Tilt knob
• Speed buttons
• Upper pole
• Pole connector
• Lower pole
• Pole ornament
• Pole support
• Stand A
• Stand B

Assembly:

1. Place stand A [19] on stand B [20] to form an X-shaped base.
2. Place the lower pole [16] with the pole support [18] on the base and fix it with the provided screws.
3. Loosen and remove the pole connector [15] from the lower pole, then slide the pole ornament [17] over the lower pole to cover the screws in the base.
4. Extend the upper pole [14], slide the pole connector [15] back over the poles, and tighten it.
5. Attach the motor [11] to the upper pole. Make sure it is pushed as far as possible onto the pole and secure it by tightening the knob under the speed buttons.
6. Loosen the grille mounting nut [6] from the motor housing [9].
7. Position the rear grille [7] firmly to the motor housing [9] and fasten it with the mounting nut [6].
8. Push the fan blade [5] along the motor shaft [8] and fasten it firmly with the spinner [4].
9. Hang the front grille on the rear grille using the grille clamp [3]. Make sure the screw holes in the rims of the grilles correspond. Fix the grilles together with the screw and the clips on the rim of the front grille.
10. Fix the grille ornament [1] to the front of the grille. Your fan is now ready for use.

Introduction

To all residents of the European Union

Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don’t install or use it and contact your dealer.

Safety Instructions

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Warning:
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid any hazard.

• Do not use the device when damage to housing or cables is noticed. Do not attempt to service the device yourself but contact an authorised dealer.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual. Do not use this fan with a speed-control device or a dimmer.
• Place the fan on a flat and sturdy surface. Make sure no objects (e.g. curtains) can be sucked into the rear of the fan.
• Do not cover the fan. Do not operate the fan without the grille in place.
• Do not leave the device unattended, and keep children and animals away.
• Do not place the device on moving vehicles, or in places where it can easily (be) tip(ped) over.
• Never insert fingers or any other object through the grille when the fan is running.
• Do not use near inflammable products or in explosive atmospheres.
• Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects filled with liquid on top of or close to the device.
• Do not use the device in the immediate surroundings of a bath, a shower, or a swimming pool.
• Do not operate the device with wet hands.
• Disconnect mains power when the device is not in use. Handle the power cord by the plug only.
• Keep power cables away from heat, oil and sharp edges.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

• Keep this device away from dust and extreme temperatures.
• Protect this device from shocks and abuse. Avoid brute force when operating the device.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorized way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
• Use the original packaging to transport and store the device.
• Keep this manual for future reference.

Features

• rotating or fixed air direction
• push buttons for 3 different speeds
• the topple-resistant base for extra safety
• quiet operation
• thermally fused motor
• stand with adjustable height.

Overview

Refer to the illustrations on page 2 of this manual.

Assembly

Assemble the fan as follows:

1. Place stand A [191 on stand B [201 to form an X-shaped base.
2. Place the lower pole [16] with the pole support [18] on the base and fix it with the provided screws.
3. Loosen and remove the pole connector [15] from the lower pole, then slide the pole ornament [17] over the lower pole to cover the screws in the base.
4. Extend the upper pole [14], slide the pole connector [15] back over the poles and tighten it.
5. Attach the motor [11] to the upper pole. Make sure it is pushed as far as possible onto the pole, and secure it by tightening the knob under the speed buttons.
6. Loosen the grille mounting nut [6] from the motor housing [9].
7. Position the rear grille [7] firmly to the motor housing [9] and fasten it with the mounting nut [6].
8. Push the fan blade [5] along the motor shaft [8] and fasten it firmly with the spinner [4].
9. Hang the front grille on the rear grille using the grille clamp [3]. Make sure the screw holes in the rims of the grilles correspond. Fix the grilles together with the screw and the clips on the rim of the front grille.
10. Fix the grille ornament [1] to the front of the grille. Your fan is now ready for use.

Use

To use the fan:

1. Place the fan on a flat and sturdy surface. Make sure no objects (e.g. curtains) can be sucked into the rear of the fan.
2. Insert the power plug into the mains.
3. To adjust the height, hold the upper pole [14] and loosen the pole connector [15]. Slide the upper pole to the desired height and tighten the pole connector.
4. Loosen the tilt knob [12] and adjust the fan’s tilt position. Tighten the knob again to fix the position.
5. Set the desired output speed using the speed buttons [13]: 0 = stop; 1 = low; 2 = medium; 3 = high.
6. Push down the oscillation knob [10] to make the fan oscillate. Pull up the oscillation knob [10] to fix the fan’s direction.
7. Always switch off and unplug from the mains before moving the fan.
8. Switch off and unplug from the mains after use.

Cleaning and maintenance

• Disconnect the device from the mains prior to maintenance activities.
• Clean out the parts with a soft and dry cloth. Remove stains with a damp cloth and some mild soap. Remove soap remnants with the damp cloth. Do not use abrasives.
• Make sure no water or any other liquid enters the motor assembly [11] or the control buttons [10, 13].
• Keep the ventilation holes of the motor assembly [11] free from dust at all times.

Technical Specifications

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.perel.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

**Velleman® Service and Quality Warranty

**

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfill strict quality requirements and legal stipulations in the EU. In order to ensure quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organizations. If, all precautionary measures notwithstanding, problems should occur, please make an appeal to our warranty (see guarantee conditions). General Warranty Conditions Concerning Consumer Products (for EU):

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacement article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacement article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
• Not covered by warranty:
  • all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
  • consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, nonrechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
  • flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
  • flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
  • damage caused by commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
  • damage resulting from inappropriate packing and shipping of the article;
  • all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
• Repairs occurring after warranty expiration are subject to shipping costs.
• The above conditions are without prejudice to all commercial warranties.
• The above enumeration is subject to modification according to the article (see article’s manual).

CONTACT

• Made in PRC
• Imported for PEREL by Velleman nv
• Legen Heirweg 33, 9890 Gavere, Belgium
• www.perel.eu.

References

• Details – Own brands – Velleman – Wholesaler and developer of electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>