Husqvarna 40-B70 Batteries and Chargers User Manual

June 11, 2024
Husqvarna

Husqvarna-LOGO

Husqvarna 40-B70 Batteries and Chargers

Husqvarna-40-B70-Batteries-and-Chargers-PRODUCT

Product Information

The product is a battery-powered device that comes with a battery, battery charger, LED indicator for the state of charge, warning LED, state of charge indicator button, and an operator’s manual. The product is compliant with applicable EC directives and has symbols on it to indicate important safety instructions and information such as the production year and week, the serial number, and the need to recycle the product at an appropriate disposal location for electrical and electronic equipment. The product is also equipped with safety definitions such as warnings, cautions, and notes to point out important parts of the manual.

Product Usage Instructions

Charging the Battery:

  1. Make sure that the battery, battery charger, and terminals on the battery are clean and dry.
  2. Connect the battery charger to a power outlet with the voltage and frequency specified on the rating plate. The charging LED will flash once.
  3. Connect the battery to the battery charger. The charging LED will come on.
  4. Remove the battery from the battery charger when it is fully charged. Push the battery indicator button to check the battery status. When all LED indicators come on, the battery is fully charged.
  5. Pull the power plug to disconnect the battery charger from the power outlet. Do not pull the power cord.

Note: Read all safety warnings and instructions before use to avoid electrical shock, fire, and/or serious injury. Keep the unit away from water and rain.

PRODUCT OVERVIEW

Husqvarna-40-B70-Batteries-and-Chargers-
FIG-1

  1. Battery
  2. LED indicator for the state of charge
  3. Warning LED
  4. State of charge indicator button
  5. Battery charger
  6. Charging status LED
  7. Operator’s manual

SYMBOLS ON THE PRODUCT

  • Be careful and use the product correctly. This product can cause serious injury or death to the operator or others.

  • Read the operator’s manual carefully and make sure that you understand the instructions before use.

  • The product agrees with the applicable EC directives.

  • Recycle the product at an applicable disposal location for electrical and electronic equipment.

  • The product or package of the product is not domestic waste.

  • Keep the unit away from water and rain.

  • The rating plate or the laser printing shows the serial number. yyyy is the production year, ww is the production week

  • Note: Other symbols/decals on the product refer to certification requirements for some commercial areas.

SAFETY DEFINITIONS

  • Warnings, cautions and notes are used to point out specially important parts of the manual.
  • WARNING: Used if there is a risk of injury or death for the operator or bystanders if the instructions in the manual are not obeyed

CAUTION: Used if there is a risk of damage to the product, other materials or the adjacent area if the instructions in the manual are not obeyed.

Note: Used to give more information that is necessary in a given situation.

SAFETY INSTRUCTIONS

IMPORTANT

WARNING: Read all safety warnings and all instructions. Failure to obey the warnings and instructions may result in electrical shock, fire and/or serious injury.

Note: Save all warnings and instructions.

  • Only use the battery chargers, QC80, QC250 or 40-C80 to charge Husqvarna original batteries. The batteries are software encrypted.
  • Only use the 40-B70, 40-B140 batteries as a power supply for the related Husqvarna products. To prevent injury, do not use the battery as a power supply for other devices.
  • Do not try to disassemble or repair the battery. All repairs is to be done by an approved dealer only.
  • Keep the battery away from sunlight, heat or open flame. The battery can cause burns and/or chemical burns.
  • Do not use a defective or damaged battery or battery charger.
  • Do not cause mechanical shock to the battery.
  • Do not remove the battery from its package until you are to use it.
  • Do not let battery acid touch your skin. Battery acid causes injuries to the skin, corrosion and burns. If you get battery acid in your eyes, do not rub but flush with water for a minimum of 15 minutes. If battery acid has touched your skin, you must clean the skin with a large quantity of water and soap. Get medical aid.
  • Keep the battery away from children.
  • Keep the battery clean and dry.
  • Clean the battery terminals with a clean dry cloth if they become dirty.
  • Do not keep the battery in the battery charger when it is fully charged.
  • Remove the battery from the product when you do not use it and during transportation.
  • Keep batteries in storage away from metal objects such as nails, screws or jewelry.

OPERATION

  • The battery must be charged before you use it for the first time. Always use Husqvarna QC80, QC250 or 40-C80 battery charger.
  • Use the battery only when the ambient temperature is between -10 °C (14 °F) and 40 °C (104 °F).
  • Use the battery charger only when the ambient temperature is between 5 °C (41 °F) and 40 °C (104 °F).
  • The battery will not charge if the battery temperature is more than 50 °C (122 ° F).
  • Push the battery indicator button to get information of the state of charge of the battery.

To charge the battery

CAUTION: Make sure that the battery, the battery charger and the terminals on the battery are clean and dry. Do not put the battery in the battery charger if it is dirty or wet.

  1. Connect the battery charger to a power outlet. The charging LED flashes 1 time.
    • CAUTION: Only connect the battery charger to a power outlet with the voltage and frequency specified on the rating plate.
  2. Connect the battery to the battery charger. The charging LED comes on.
  3. Remove the battery from the battery charger when it is fully charged. Push the battery indicator button for battery status. When all the LED indicators come on, the battery is fully charged.
  4. Pull the power plug to disconnect the battery charger from the power outlet. Do not pull the power cord.
LED indicator Battery status (state of charge)

40-B70, 40-B140
4 LED lights are on| The battery is 76% – 100% charged.
3 LED lights are on| The battery is 51% – 75% charged.
2 LED lights are on| The battery is 26% – 50% charged.
1 LED light is on| The battery is 6% – 25% charged.
1 LED light flashes| The battery is 0% – 5% charged.

TROUBLESHOOTING

Condition Possible faults Possible procedure
The battery warning LED flashes. Temperature deviation, the battery is too
cold or too hot to use. Let the battery cool down or move it indoors to warm

it up. When the battery has the correct temperature, it can be used again. The battery will not charge if the battery temperature is more than 50 °C (122 °F).
Use the battery in ambient temperatures between -10 °C (14 °F) and 40

°C (104 °F).

Use the battery charger in ambient temperatures between 5 °C (41 °F) and 40 °C (104 °F).
The battery is empty.| Charge the battery.
The battery warning LED comes on.| Permanent battery error.| Speak to your dealer.

TRANSPORTATION AND STORAGE
  • The supplied Li-ion batteries obey the Dangerous Goods Legislation requirements.
  • Obey the special requirement on package and labels for commercial transportations, also those from third parties and forwarding agents.
  • Speak to a person with special training in dangerous material before you send the product. Obey all applicable national regulations.
  • Use tape on the contacts when you put the battery in a package. Put the battery in the package tightly to prevent damage and accidents.
  • Do not keep the battery in an area where static electricity can occur. Do not keep the battery in a metal box.
  • Put the battery in a dry, frost free and clean space with correct temperature.
  • Put the battery in storage where the temperature is between 5 °C (41 °F) and 25 °C (77 °F). Keep the battery away from sunlight.
  • Charge the battery 30% to 50% before you put it in storage for long periods.
  • Clean the battery before you put it in storage.

DISPOSAL

  • Husqvarna products are not domestic waste and must only be discarded as given in this manual.
  • Obey the local disposal requirements and applicable regulations.
  • Recycle the product and package at an applicable disposal location.
  • Speak to your local Husqvarna dealer for more information on how to recycle and discard the product.

TECHNICAL DATA

For technical data, refer to the rating plate of the battery.

QR code scanner

Husqvarna-40-B70-Batteries-and-Chargers-
FIG-4

www.husqvarna.com

Documents / Resources

| Husqvarna 40-B70 Batteries and Chargers [pdf] User Manual
40-B70 Batteries and Chargers, 40-B70, Batteries and Chargers, Chargers
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals