GRANDSTREAM GCC6010,GCC6011 SMB UC Networking Convergence Wired Gateway Installation Guide
- August 20, 2024
- GRANDSTREAM
Table of Contents
GCC6010/GCC6011
SMB UC/Networking Convergence
Wired Gateway
Quick Installation Guide
PACKAGE CONTENT
GCC6011 SSD Installation
2x Screws
1x Nut
GCC6010/6011 PORTS
| 1 | 2.5G SFP Port |
|---|---|
| 2 | USB 3.0 Port |
| 3 | Ethernet Port |
| 4 | DC48V |
| 5 | RESET |
| 6 | Micro SD |
| 7 | Grounding terminal |
| 8 | Kensington Lock |
CONNECTING THE GCC6010/6011
GCC6010:
Ports with this symbol are configured to be used as a WAN port by default at
the factory.
192.168.80.1
gcc.grandstream.com
Default IP address
The default password information is printed on the MAC label on the bottom of the unit. The default username is “admin”.
MOUNTING GCC6010/6011 TO THE WALL
INSTALL ON A 19” STANDARD RACK (GCC6011)
GROUNDING THE DEVICE
- Ground Terminal
- Ground Bar
**SSD INSTALLATION (GCC6011)
**
The GCC6010/GCC6011 is not pre-configured to support or make emergency calls
to any type of hospital, law enforcement agency, medical care unit (“Emergency
Service(s)”) or any other kind of Emergency Service. You must make additional
arrangements to access Emergency Services. It is your responsibility to
purchase SIP-compliant Internet telephone service, properly configure the
GCC6010/ GCC6011 to use that service, and periodically test your configuration
to confirm that it works as you expect. It is also your responsibility to
purchase traditional wireless or landline telephone services to access
Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE
GCC6010/GCC6011. NEITHER GRANDSTREAM NOR ITS OFFICES, EMPLOYEES OR AFFILIATES
MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY
AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR
INABILITY TO USE THE GCC6010/GCC6011 TO CONTACT EMERGENCY SERVICES, AND YOUR
FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN
ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.
The GNU GPL license terms are incorporated into the device firmware and can be
accessed via the Web user interface of the device at my_device_ip/gpl_license.
It can also be accessed here: https://www.grandstream.com/legal/open-source-
software
To obtain a CD with GPL source code information please submit a written
request to info@grandstream.com
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 – 9300
www.grandstream.com
References
- Grandstream Networks - Networking & Unified Communications
- Grandstream Networks - Networking & Unified Communications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>