HT818 Buy Grandstream Analog Telephone Adapter User Guide

HT818 Buy Grandstream Analog Telephone Adapter

Grandstream Networks, Inc.
HT818
User Guide

HT818 – User Guide
The HT818 analog telephone adapter provide transparent connectivity for analog phones and faxes to the world of internet voice. Connecting to any analog phone, fax or PBX, the HT818 is an effective and flexible solution for accessing internet-based telephone services and corporate intranet systems across established LAN and internet connections. This Grandstream Handy Tones are a new addition to the popular Handy Tone ATA product family. This manual will help you to learn how to operate and manage your HT818 analog telephone adaptor and make the best use of their many upgraded features including simple and quick installation, 3- way conferencing, direct IP-IP Calling, and new provisioning support among other features. The HT818 is very easy to manage and configure, and it is specifically designed to be an easy to use and affordable VoIP solution for both the residential user and the teleworker.

PRODUCT OVERVIEW

The HT818 is an 8 ports analog telephone adapter (ATA) that allow users to create a high-quality and manageable IP telephony solution for residential and office environments. Their ultra-compact size, voice quality, advanced VoIP functionality, security protection and auto provisioning options enable users to take advantage of VoIP on analog phones and enables service providers to offer high quality IP service. The HT818 is an ideal ATA for individual use and for large scale commercial IP voice deployments since it permits small and medium businesses to create integrated IP and PSTN telephony systems that efficiently manage communication costs. HT818’s inclusion of an integrated NAT router and dual 10/100/1000Mbps Ethernet WAN and LAN ports enables a shared broadband connection between multiple Ethernet devices as well as the extension of VoIP services to analog phones.

Feature Highlights
The following table contains the major features of the HT818:

• Support dual 10/100/1000Mbps Ethernet port, 2 SIP profiles through 8 FXS ports
• Support 3-way voice conferencing.
• Support wide range of caller ID formats.
• Support advanced telephony features, including call transfer, call forward, call-waiting, do not disturb, message waiting indication, multi-language prompts, flexible dial plan and more.
• Support T.38 Fax for creating Fax-over-IP.
• TLS and SRTP security encryption technology to protect calls and accounts. Automated provisioning options include TR-069 and XML Config files.
• Failover SIP server automatically switches to secondary server if main server loses connection.
• Use with Grandstream’s UCM series of IP PBXs for Zero Configuration provisioning.
• Strong AES encryption with security certificate per unit
• GR-909 Line Testing Functionalities.
• Exceptional voice quality with wide-band HD codec

Table 1: HT818 Features at a Glance

HT818 Technical Specifications
The following table resumes all the technical specifications including the protocols/standards supported, voice codecs, telephony features, languages and upgrade/provisioning settings for the HT818.

Interfaces

Telephone Interfaces| Eight (8) RJ11 FXS ports
Network Interface| Two (2) 10/100/1000 Mbps Ethernet port (RJ45).
LED Indicators| POWER, LAN, WAN, PHONE1, PHONE2, PHONE3, PHONE4, PHONE 5, PHONE 6, PHONE 7 and PHONE 8.
Factory Reset Button| Yes.
Voice, Fax, Modem
Telephony Features| Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, 3-way conference.
Voice Codecs| G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, G722, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation.
Fax over IP| T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto- switch to G.711 for Fax Pass-through.
Short/Long Haul Ring Load| 2 REN, up to 1km on 24AWG line
Caller ID| Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID.
Disconnect Methods| Busy Tone, Polarity Reversal/Wink, Loop Current.
Signaling
Network Protocols| TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, SSH, STUN, SIP (RFC3261), SIP over TCP/TLS, SRTP, TR-069.
QoS| Layer 2 (802.1Q VLAN, SIP/RTP 802.1p) and Layer 3 (ToS, Diffserv, MPLS).
DTMF Methods| In-audio, RFC2833 and/or SIP INFO.
Provisioning and Control| HTTP, HTTPS, SSH, TFTP, TR-069, secure and automated provisioning using TR069, syslog.
Security
Media| SRTP.
Control| TLS/SIPS/HTTPS.
Management| Syslog support, SSH, remote management using web browser.
---|---
Physical
Universal Power Supply|

• Input: 100-240VAC, 50-60Hz
• Output: 12V/1.5A.

Environmental| Operational: 32o – 104oF or 0º – 40ºC. Storage: 14o – 140oF or -10º – 60ºC. Humidity: 10 – 90% Non-condensing.
Dimensions and Weight| Dimension : 36 x 120 x 180 mm (H x W x D) Weight: 356g
Compliance
Compliance| FCC/CE/RCM.

Table 2: HT818 Technical Specifications

GETTING STARTED

This chapter provides basic installation instructions including the list of the packaging contents and also information for obtaining the best performance with the HT818.

Equipment Packaging

• The HT818 ATA package contains
• Figure 1: HT818 Package Contents
• Note: Check the package before installation. If you find anything missing, contact your system administrator.

HT818 Ports Description

Phone 1- 8 (HT818)| Connects the analog phones / fax machines to the phone adapter using an RJ-11 telephone cable.
---|---
WAN| Connects the phone adapter to your router, switch or modem using an Ethernet RJ45 network cable. Co
LAN| Connects the phone adapter to your PC or switch using an Ethernet RJ45 network cable.
DC Power| Connects the phone adapter to PSU (12V – 1.5A).
Reset| Factory reset button. Press for 7 seconds to reset factory default settings.
---|---

Table 3: Definition of the HT818 Connectors

Connecting HT818
The HT818 is designed for easy configuration and easy installation, to connect your HT818, please follow the steps below:

Scenario 1: Connecting the HT818 using WAN Port
When connecting HT818 using the WAN port, it will act as simple DHCP Client.

1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a standard touch-tone analog telephone.
2. Connect the WAN port of the HT818 to a router, switch or modem using an Ethernet cable.
3. Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect the technical specifications of the power adapter used.
4. Power, WAN and Phone LEDs will be solidly lit when the HT818 is ready for use.

Scenario 2: Connecting the HT818 using LAN Port
When connecting the HT818 using the LAN port, it will act as a router and DHCP serving addresses, the devices connected with HT818 LAN will pull DHCP addresses from your HT818.

1. Insert a standard RJ11 telephone cable into the phone ports and connect the other end of the telephone cable to a standard touch-tone analog telephone.
2. Connect a computer or switch to the LAN port of the HT818 using an Ethernet Cable.
3. Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect the technical specifications of the power adapter used.
4. Power, LAN and Phone LEDs will be solidly lit when the HT818 is ready for use.

Please make sure to enable NAT Router under Web GUI ? Basic Settings ?Device Mode.

HT818 LEDs Pattern
There are four (4) LED types that help you manage the status of your HT818.

it flashes when the HT818 is booting up
WAN LED| The WAN LED lights up when The HT818 is connected to your network through the WAN port.
LAN LED| The LAN LED lights up when The HT818 is connected to your network through the LAN port.
Phone LED 1- 8| The phone LEDs indicate status of the respective FXS port-phone on the back panel

• OFF – Unregistered
• ON (Solid Blue) – Registered and Available
• Blinking every 500 ms – Off-Hook / Busy
• Slow blinking – FXS LEDs indicates voicemail

Table 4: HT818 LEDs Pattern Description

CONFIGURATION GUIDE

The HT818 can be configured via one of two ways:

• The IVR voice prompt menu.
• The Web GUI embedded on the HT818 using PC’s web browser.

Obtain HT818 IP Address via Connected Analogue Phone
HT818 are by default configured to obtain the IP address from DHCP server where the unit is located. In order to know which IP address is assigned to your HT818, you should access to the “Interactive Voice Response Menu” of your adapter via the connected phone and check its IP address mode.

Please refer to the steps below to access the interactive voice response menu:

1. Use a telephone connected to phone ports (FXS) of your HT818.
2. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option “.
3. Press 02 and the current IP address will be announced.

Understanding HT818 Interactive Voice Prompt Response Menu
The HT818 has a built-in voice prompt menu for simple device configuration which lists actions, commands, menu choices, and descriptions. The IVR menu works with any phone connected to the HT818. Pick up the handset and dial “***” to use the IVR menu.

option Press “ # ” to return to the main menu Enter 01-05, 07,10, 12-17,47 or 99 menu options
01| “DHCP Mode”,
“Static IP Mode” “PPPoE Mode“|

• Press “ 9 ” to toggle the selection
• If using “Static IP Mode”, configure the IP address information using menus 02 to 05.
• If using “Dynamic IP Mode”, all IP address information comes from the DHCP server automatically after reboot.
• If using “PPPoE Mode”, configure PPPoE Username and Password from web GUI to get IP from your ISP.

02| “IP Address “ + IP address| The current WAN IP address is announced If using “Static IP Mode”, enter 12 digit new IP address. You need to reboot your HT818 for the new IP address to take Effect.
03| “Subnet “ + IP address| Same as menu 02
04| “Gateway “ + IP address| Same as menu 02
05| “DNS Server “ + IP address| Same as menu 02
| | Press “ 9 ” to move to the next selection in the list:
| | PCM U / PCM A
| | iLBC
07| Preferred Vocoder| G-726
| | G-723
| | G-729
| | OPUS
| | G722
10| “MAC Address”|

• Announces the MAC address of the unit.
• Note : The device has two MAC addresses. One for the WAN port and one for the LAN port. The device MAC address announced is the address of LAN port.

12| WAN Port Web Access| Press “ 9 ” to toggle between enable / disable. Default is disabled.
13| Firmware Server IP Address| Announces current Firmware Server IP address. Enter 12-digit new IP address.
Menu| Voice Prompt| Options
---|---|---
14| Configuration Server IP Address| Announces current Config Server Path IP address. Enter 12-digit new IP address.
15| Upgrade Protocol| Upgrade protocol for firmware and configuration update. Press “ 9 ” to toggle between TFTP / HTTP / HTTPS / FTP / FTPS
16| Firmware Version| Announces Firmware version information.
17| Firmware Upgrade| Firmware upgrade mode. Press “ 9 ” to toggle among the following three options:

• Always check
• Check when pre/suffix changes Never upgrade

47| “Direct IP Calling”| Enter the target IP address to make a direct IP call, after dial tone.
86| Voice Mail| Access to your voice mails messages.
99| “RESET”| Press “ 9 ” to reboot the device
Enter MAC address to restore factory default setting (See Restore Factory Default Setting section)
701- 708| Phone calls between different ports of the same HT818| HT818 supports inter-port calling from voice menu. 70X (X is the port number)
| “Invalid Entry”| Automatically returns to main menu
| “Device not registered”| This prompt will be played immediately after off hook If the device is not registered and the option “Outgoing Call without Registration” is in NO

Table 5: Voice Prompt Menu

Five success tips when using the voice prompt

• “*” shifts down to the next menu option and “#” returns to the main menu
• “9” functions as the ENTER key in many cases to confirm or toggle an option.
• All entered digit sequences have known lengths – 2 digits for menu option and 12 digits for IP address. For IP address, add 0 before the digits if the digits are less than 3 (i.e. – 192.168.0.26 should be key in like 192168000026. No decimal is needed).
• Key entry cannot be deleted but the phone may prompt error once it is detected.
• Dial *98 to announce the extension number of the port

Please make sure to reboot the device after changing network settings (IP Address, Gateway, Subnet…) to apply the new configuration.

Configuration via Web Browser
The HT818 embedded Web server responds to HTTP GET/POST requests. Embedded HTML pages allow a user to configure the HT818 through a web browser such as Google Chrome, Mozilla Firefox and Microsoft’s IE.

• Microsoft Internet Explorer: version 10 or higher.
• Google Chrome: version 58.0.3 or higher.
• Mozilla Firefox: version 53.0.2 or higher.
• Safari: version 5.1.4 or higher.
• Opera: version 44.0.2 or higher.

Accessing the Web UI

Via WAN port
For the initial setup, the Web access is by default enabled when the device is using private IP and disabled when using public IP, and you cannot access the Web UI of your HT818 until it’s enabled, the following steps will show you how to enable it via IVR.

1. Power your HT818 using PSU with the right specifications.
2. Connect your analog phone to phone ports (FXS) of your HT818.
3. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option “.
4. Press 12, the IVR menu will announce that the web access is disabled, press 9 to enable it.
5. Reboot your HT818 to apply the new settings.

Please refer to steps below if your HT818 is connected via WAN port:

1. You may check your HT818 IP address using the IVR on the connected phone.
   Please see Obtain the HT818 IP address via the connected analogue phone

2. Open the web browser on your computer.

3. Enter the HT818’s IP address in the address bar of the browser.

4. Enter the administrator’s password to access the Web Configuration Menu.

The computer must be connected to the same sub-network as the HT818. This can be easily done by connecting the computer to the same hub or switch as the HT818.

Via LAN port
Please refer to steps below if your HT818 is connected via LAN port:

1. Power your HT818 using PSU with the right specifications.
2. Connect your computer or switch directly to your HT818 LAN port.
3. Open the web browser on your computer.
4. Enter the default LAN IP address (192.168.2.1) in the address bar of the browser.
5. Enter the administrator’s password to access the Web Configuration Menu.
6. Make sure to reboot your device after changing your settings to apply the new configuration.

Please make sure that your computer has a valid IP address on the range 192.168.2.x so you can access the web GUI of your HT818.

Web UI Access Level Management
There are three default passwords for the login page:

The password is case sensitive with maximum length of 25 characters. When changing any settings, always submit them by pressing Update or Apply button on the bottom of the page. After submitting the changes in all the Web GUI pages, if a reboot is required, the web page will prompt the user to reboot by offering a reboot button on the web page.

Saving the Configuration Changes
After users make changes to the configuration, pressing Update button will save but not apply the changes until Apply button is clicked. Users can instead directly press Apply button. When a reboot is required to apply changes, the web page will prompt the user to reboot by offering a reboot button on the web page.

Changing Admin Level Password

1. Access your HT818 web UI by entering its IP address in your favorite browser. ( the below screenshots are from the HT812 ATA model since the configuration is similar between the two models)
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings ? New Admin Password and enter the new admin password.
5. Confirm the new admin password.
6. Press Apply at the bottom of the page to save your new settings.

Changing User Level Password

1. Access your HT818 web UI by entering its IP address in your favorite browser. ( the below screenshots are from the HT812 ATA model since the configuration is similar between the two models)
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings ? New End User Password and enter the new end-user password.
5. Confirm the new end-user password.
6. Press Apply at the bottom of the page to save your new settings.

Changing Viewer Password

1. Access your HT818 web UI by entering its IP address in your favorite browser. ( the below screenshots are from the HT812 ATA model since the configuration is similar between the two models)
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings ? New Viewer Password and enter the new viewer password.
5. Confirm the new viewer password.
6. Press Apply at the bottom of the page to save your new settings.

Changing HTTP Web Port

1. Access your HT818 web UI by entering its IP address in your favorite browser. ( the below screenshots are from the HT812 ATA model since the configuration is similar between the two models)
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings ? HTTP Web Port.
5. Make sure that the Web Access Mode is set to HTTP.
6. Change the current port to your desired/new HTTP port. Ports accepted are in the range [1-65535].
7. Press Apply at the bottom of the page to save your new settings

Configuring HT818 through Voice Prompts

As mentioned previously, The HT818 has a built-in voice prompt menu for simple device configuration. Please refer to “Understanding HT818 Interactive Voice Prompt Response Menu” for more information about IVR and how to access its menu.

• DHCP MODE
  Select voice menu option 01 to enable HT818 to use DHCP.

• STATIC IP MODE
  Select voice menu option 01 to enable HT818 to use STATIC IP mode, then use options 02, 03, 04, and 05 to set up the IP address, Subnet Mask, Gateway, and DNS server respectively.

• PPPOE MODE
  Select voice menu option 01 to allow the HT818 to enable the PPPoE mode. PPPoE Username and Password should be configured from web GUI.

• FIRMWARE SERVER IP ADDRESS
  Select voice menu option 13 to configure the IP address of the firmware server.

• CONFIGURATION SERVER IP ADDRESS
  Select voice menu option 14 to configure the IP address of the configuration server.

• UPGRADE PROTOCOL
  Select the menu option 15 to choose firmware and configuration upgrade protocol between TFTP, HTTP, HTTPS, FTP and FTPS.

• FIRMWARE UPGRADE MODE
  Select voice menu option 17 to choose firmware upgrade mode among the following three options:

  • Always check,
  • check when pre/suffix changes, and 3) never upgrade.

• WAN PORT WEB ACCESS
  Select voice menu option 12 to enable/disable web access from WAN port. Press 9 in this menu to toggle between enable /disable. Default is disabled.

Register a SIP Account

The HT818 support 2 profiles which can be configured with 2 SIP accounts. Please refer to the following steps to register your accounts via web user interface

1. Access your HT818 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Profile (1 or 2) pages.
5. In Profile tab, set the following:
6. Account Active to Yes.
7. Primary SIP Server field with your SIP server IP address or FQDN.
8. Failover SIP Server with your Failover SIP Server IP address or FQDN. Leave empty if not available.
9. Prefer Primary SIP Server to No or Yes depending on your configuration. Set to No if no Failover SIP Server is defined. If “Yes”, account will register to Primary SIP Server when failover registration expires.
10. Outbound Proxy: Set your Outbound Proxy IP Address or FQDN. Leave empty if not available.
11. After configuring the SIP server and activating the profiles, you should access to FXS Ports page to register your accounts. In FXS Ports tab, set the following:
12. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to phone number or actually a phone number.
13. Authenticate ID: SIP service subscriber’s Authenticate ID used for authentication. Can be identical to or different from SIP User ID.
14. Authenticate Password: SIP service subscriber’s account password to register to SIP server of ITSP. For security reasons, the password will field will be shown as empty.
15. Name: Any name to identify this specific user.
16. Set Enable Port to Yes.
17. Press Apply at the bottom of the page to save your configuration.

Figure 10: SIP Accounts settings

After applying your configuration, your account will register to your SIP Server, you can verify if it has been correctly registered with your SIP server from your HT818 web interface under Status ? Port Status ? Registration (If it displays Registered, it means that your account is fully registered, otherwise it will display Not Registered so in this case you must double check the settings or contact your provider). Figure 11: Accounts Status

When all the FXS ports are registered, the simultaneous ring will have one second delay between each ring on each phone.

Rebooting HT818 from Remote
Press the “Reboot” button at the bottom of the configuration menu to reboot the ATA remotely. The web browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in again

CALL FEATURES

The HT818 support all the traditional and advanced telephony features.

02723 (G723), 02729 (G729), 027201 (iLBC). 02722 (G722)
*03| Disable LEC* (per call) Dial “03” +” number”. No dial tone is played in the middle.
16| Enable SRTP
17| Disable SRTP
30| Block Caller ID (for all subsequent calls)
31| Send Caller ID (for all subsequent calls)
---|---
47| Direct IP Calling. Dial “47” + “IP address”. No dial tone is played in the middle.
50| Disable Call Waiting (for all subsequent calls)
51| Enable Call Waiting (for all subsequent calls)
67| Block Caller ID (per call). Dial “67” +” number”. No dial tone is played in the middle.
82| Send Caller ID (per call). Dial “82” +” number”. No dial tone is played in the middle.
69| Call Return Service: Dial 69 and the phone will dial the last incoming phone number received.
70| Disable Call Waiting (per call). Dial “70” +” number”. No dial tone is played in the middle.
71| Enable Call Waiting (per call). Dial “71” +” number”. No dial tone is played in the middle
72| Unconditional Call Forward: Dial “72” and then the forwarding number followed by “#”. Wait for dial tone and hang up. (dial tone indicates successful forward)
73| Cancel Unconditional Call Forward. To cancel “Unconditional Call Forward”, dial “73”, wait for dial tone, then hang up.
74| Enable Paging Call : Dial “74” and then the destination phone number you want to page.
78| Enable Do Not Disturb (DND): When enabled all incoming calls are rejected.
79| Disable Do Not Disturb (DND): When disabled, incoming calls are accepted.
87| Blind Transfer
90| Busy Call Forward: Dial “90” and then the forwarding number followed by “#”. Wait for dial tone then hang up.
91| Cancel Busy Call Forward. To cancel “Busy Call Forward”, dial “91”, wait for dial tone, then hang up.
92| Delayed Call Forward. Dial “92” and then the forwarding number followed by “#”. Wait for dial tone then hang up.
93| Cancel Delayed Call Forward.* To cancel Delayed Call Forward, dial “93”, wait for dial tone, then hang up
Flas h/ Hoo k| Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call.
#| Pressing pound sign will serve as Re-Dial key.

Table 6: HT818 Call Features

CALL OPERATIONS

Placing a Phone Call
To make the outgoing calls using your HT818

1. Pick up the handset of the connected phone.
2. Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or
3. Dial the number directly and press # (Use # as dial key” must be configured in web configuration).

Examples:

1. Dial an extension directly on the same proxy, (e.g. 1008), and then press the # or wait for 4 seconds.
2. Dial an outside number (e.g. 626-666-7890), first enter the prefix number (usually 1+ or international code) followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP service provider for further details on prefix numbers.

Note:

• When placing the analog phone that is connected to the FXS port off hook, the dial tone will be played even if the sip account is not registered. If users prefer the busy tone to be played instead, the following configuration need to be made:
  • “Play Busy Tone When Account is unregistered” need to be set to YES under advanced settings.
  • “Outgoing call without registration” need to be set to NO under Profile x settings.

Direct IP Calls
Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy.

Elements necessary to completing a Direct IP Call:

• Both HT818 and other VoIP Device, have public IP addresses, or
• Both HT818 and other VoIP Device are on the same LAN using private IP addresses, or
• Both HT818 and other VoIP Device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).

The HT818 support two ways to make Direct IP Calling:

Using IVR

1. Pick up the analog phone then access the voice menu prompt by dialing “***”
2. Dial “47” to access the direct IP call menu
3. Enter the IP address after the dial tone and voice prompt “Direct IP Calling”

Using Star Code

1. Pick up the analog phone then dial “*47”
2. Enter the target IP address.

Note: No dial tone will be played between step 1 and 2 and destination ports can be specified using “*” (encoding for “:”) followed by the port number.

Examples of Direct IP Calls:

1. If the target IP address is 192.168.0.160, the dialing convention is 47 or Voice Prompt with option 47, then
   1921680160, followed by pressing the “#” key if it is configured as a send key or wait 4 seconds. In this case, the default destination port 5060 is used if no port is specified

2. If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be: 47 or Voice Prompt with option 47, then 1921680160*5062 followed by pressing the “#” key if it is configured as a send key or wait for 4 seconds.
   Note: When completing direct IP call, the “Use Random SIP/RTP Port” should set to “NO”.

Call Hold

• You can place a call on hold by pressing the “flash” button on the analog phone (if the phone has that button).
• Press the “flash” button again to release the previously held Caller and resume conversation. If no “flash” button is available, use “hook flash” (toggle on-off hook quickly). You may drop a call using hook flash.

Call Waiting

• The call waiting tone (3 short beeps) indicates an incoming call, if the call waiting feature is enabled.
• To toggle between incoming call and current call, you need to press the “flash” button the first call is placed on hold.
• Press the “flash” button to toggle between the active calls.

Call Transfer

Blind Transfer
Assume that the call is established between phone A and B are in conversation. The phone A wants to blind transfer phone B to phone C:

1. On the phone A presses FLASH to hear the dial tone.
2. The phone A dials *87 then dials caller C’s number, and then # (or wait for 4 seconds)
3. The phone A will hear the dial tone. Then, A can hang up.

“Enable Call Feature” must be set to “Yes” in web configuration page.

Attended Transfer
Assume that the call is established between phone A and B are in conversation. The phone A wants to attend transfer phone B to phone C:

1. On the phone A presses FLASH to hear the dial tone.
2. Phone A dials the phone C’s number followed by # (or wait for 4 seconds).
3. If phone C answers the call, phones A and C are in conversation. Then A can hang up to complete transfer.
4. If phone C does not answer the call, phone A can press “flash” to resume call with phone B.

When attended transfer fails and A hangs up, the HT818 will ring back user A to remind A that B is still on the call. A can pick up the phone to resume conversation with B

3-Way conferencing
The HT818 support Bellcore style 3-way Conference. To perform the 3-way conference, we assume that the call is established between phone A and B are in conversation. Phone A (HT818) wants to bring third phone C into conference:

1. Phone A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.
2. Phone A dials C’s number then # (or wait for 4 seconds).
3. If phone C answers the call, then A presses FLASH to bring B, C in the conference.
4. If phone C does not answer the call, phone A can press FLASH back to talk to phone B.
5. If phone A presses FLASH during conference, the phone C will be dropped out.
6. If phone A hangs up, the conference will be terminated for all three parties when configuration “Transfer on Conference Hang up” is set to “No”. If the configuration is set to “Yes”, A will transfer B to C so that B and C can continue the conversation.

Call Return
In order to call back to the latest incoming number.

1. Pick up the handset of the connected phone (Off-hook).
2. After hearing the dial tone, input “*69”.
3. Your phone will automatically call back to the latest incoming number.

All star codes (*XX) related features mentioned above are supported by ATA default settings. If your service provider provides different feature codes, please contact them for instructions.

Inter-Port Calling

• In some cases, a user may want to make phone calls between the phones connected to multiple ports of the same HT818 when it is used as a standalone unit, without the use of a SIP server. In such cases, users still will be able to make inter-port calls by using the IVR feature.
• On the HT818 inter-port calling is achieved by dialing 70X (X is the port number). For example, the user connected to port 1 can be reached by dialing and 701.

Voice Mail

VM Notification

• The HT818 indicates new voice mail messages using Phone LEDs and Stutter Tone.
• The Phone LEDs on HT818 will start blinking slowly when a new voice mail message is available on corresponding account.
• A stutter tone will be played at first few seconds followed by dial tone when picking up the handset.
• Note: New VM messages can be also indicated by LED blink, screen display, etc… if they are supported on connected analog phones.

Accessing VM
To retrieve the new voice mail messages received, please refer to following steps:

1. Pick up the handset of the connected phone (stutter tone will be played).
2. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option “.
3. Press 86 and enter your configured password (if exist) to access your voice mail menu.

Flash Digit Control
If the option “Flash Digit Control” is enabled on web UI, call operations will require different steps as follows:

• Call Hold:
  • Assume that the call is established between phone A and B.
  • The phone A received a call from C, then it held B to answer C.
  • Press the “Flash + 1” to hang up the current call (A – C) and resume call on hold (B).
  • Or press “Flash + 2” to hold current call (A – C) and resume call on hold (B).
• Attended transfer:
  Assume that the call is established between phone A and B. The phone A wants to attend transfer phone B to phone C:

1. On the phone A presses FLASH to hear the dial tone.
2. Phone A dials the phone C’s number followed by # (or wait for 4 seconds).
3. If phone C answers the call, phones A and C are in conversation. Then A can press “Flash + 4” to complete transfer.

• 3- Way Conferencing:
  Assume that the call is established, and phone A and B are in conversation. Phone A(HT801/HT802) wants to bring third phone C into conference:

1. Phone A presses Flash (on the analog phone, or Hook Flash for old model phones) to get a dial tone.
2. Phone A dials C’s number then # (or wait for 4 seconds).
3. When phone C answers the call, then A can press “Flash +3” to bring B, C in the conference.

Note
Additional Flash digit events have been added on the latest firmware version 1.0.43.10

NAT Settings

If you plan to keep the HT818 within a private network behind a firewall, we recommend using STUN Server. The following three settings are useful in the STUN Server scenario:

1. STUN Server (under advanced settings webpage) Enter a STUN server IP (or FQDN) that you may have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP, keep this field blank.
2. Use Random SIP/RTP Ports (under advanced settings webpage) This setting depends on your network settings. Generally, if you have multiple IP devices under the same network, it should be set to Yes. If using a public IP address, set this parameter to No.
3. NAT traversal (under the FXS web page), set this to Yes when gateway is behind firewall on a private network.

DTMF Methods

• The HT818 support the following DTMF mode:
  • DTMF in-audio
  • DTMF via RTP (RFC2833)
  • DTMF via SIP INFO
• Set priority of DTMF methods according to your preference. This setting should be based on your server DTMF setting.

Preferred Vocoder (Codec)

• The HT818 support following voice codecs. On Profile pages, choose the order of your favorite codecs:
  • PCMU/A (or G711µ/a)
  • G729 A/B
  • G723.1
  • G726
  • iLBC
  • OPUS
  • G722

UPGRADING AND PROVISIONING

• The HT818 can be upgraded via TFTP/HTTP/HTTPS/FTP/FTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS/FTP/FTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP/HTTPS or FTP/FTPS; the server name can be FQDN or IP address.
• Examples of valid URLs:
  • firmware.grandstream.com
  • fw.ipvideotalk.com/gs

Firmware Upgrade procedure
Please follow below steps in order to upgrade the firmware version of your HT818:

1. Access your HT818 UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings ? Firmware Upgrade and Provisioning page and enter the IP address or the FQDN for the upgrade server in “Firmware Server Path” field and choose to upgrade via TFTP, HTTP/HTTPS or FTP/FTPS.
5. Make sure to check “Always Check for New Firmware”.
6. Update the change by clicking the “Apply” button at the bottom of the page. Then “Reboot” or power cycle the HT818 to update the new firmware.

Figure 12: Firmware Upgrade Page

Upgrading via Local Directory

1. Download the firmware file from Grandstream web site
2. Unzip it and copy the file in to a folder in your PC
3. From the HT818 web interface (Advanced Settings page) you can browse your hard drive and select the folder you previously saved the file (HT8xfw.bin)
4. Click “Upload Firmware” and wait few minutes until the new program is loaded.

Always check the status page to see that the program version has changed.

• Upgrading via Local TFTP/HTTP Servers
  For users that would like to use remote upgrading without a local TFTP/HTTP/FTP server, Grandstream offers a NAT-friendly HTTP server. This enables users to download the latest software upgrades for their devices via this server.

• Please refer to the webpage:https://www.grandstream.com/support/firmware

• Alternatively, users can download a free TFTP, HTTP or FTP server and conduct a local firmware upgrade. A free window version TFTP server is available for download from:

  • http://www.solarwinds.com/products/freetools/free_tftp_server.aspx
  • http://tftpd32.jounin.net/ .

Instructions for local firmware upgrade via TFTP:

1. Unzip the firmware files and put all of them in the root directory of the TFTP server.
2. Connect the PC running the TFTP server and the phone to the same LAN segment.
3. Launch the TFTP server and go to the File menu->Configure->Security to change the TFTP server’s default setting from “Receive Only” to “Transmit Only” for the firmware upgrade.
4. Start the TFTP server and configure the TFTP server in the phone’s web configuration interface.
5. Configure the Firmware Server Path to the IP address of the PC.
6. Save and Apply the changes and reboot the HT818.

End users can also choose to download a free HTTP server from http://httpd.apache.org/ or use Microsoft IIS web server.
Also, users can download a free FTP server from https://filezilla- project.org/ .

Firmware and Configuration File Prefix and Postfix
Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and Postfix. This makes it the possible to store all of the firmware with different version in one single directory. Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching Prefix and Postfix. Thus, multiple configuration files for the same device can be stored in one directory. In addition, when the field “Check New Firmware only when F/W pre/suffix changes” is set to “Yes”, the device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

Managing Firmware and Configuration File Download
When “Automatic Upgrade” is set “Yes, every” the auto check will be done in the minute specified in this field. If set to “daily at hour (0-23)”, Service Provider can use P193 (Auto Check Interval) to have the devices do a daily check at the hour set in this field with either Firmware Server or Config Server. If set to “weekly on day (0-6)” the auto check will be done on the day specified in this field. This allows the device periodically to check if there are any new changes need to be taken on a scheduled time. By defining different intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File download in minutes to reduce the Firmware or Provisioning Server load at any given time

Configuration File Download

• Grandstream SIP Devices can be configured via the Web Interface as well as via a Configuration File (binary or XML) through TFTP, HTTP/HTTPS or FTP/FTPS. The Config Server Path is the TFTP, HTTP/HTTPS or FTP/FTPS server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The Config Server Path can be the same or different from the Firmware Server Path.
• A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric numbers. i.e., P2 is associated with the “New Password” in the Web GUI->Maintenance->Web/SSH Access page->Admin Password. For a detailed parameter list, please refer to the corresponding firmware release configuration template.
• When the HT818 boots up or reboots, it will send a request to download a file named “cfgxxxxxxxxxxxx” followed by a configuration XML file named “cfgxxxxxxxxxxxx.xml”, where “xxxxxxxxxxxx” is the MAC address of the phone, i.e., “cfg000b820102ab” and “cfg000b820102ab.xml”. If the download of “cfgxxxxxxxxxxxx.xml” file is not successful, the provision program will download a generic cfg.xml file. The configuration file name should be in lower case letters.

Notes:

1. The Only acceptable Config file formats to be used when provisioning are XML or binary.
2. Make sure the MAC header on the Config file is the provisioned device’s MAC address or you can remove the header completely.

RESTORE FACTORY DEFAULT SETTINGS

• Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings.
• Grandstream is not responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.

There are three (3) methods for resetting your unit:

Using the Reset Button
To reset default factory settings using the reset button please follow the steps above:

1. Unplug the Ethernet cable.
2. Locate the reset hole on the back panel of your HT818.
3. Insert a pin in this hole, and press for about 7 seconds.
4. Take out the pin. All unit settings are restored to factory settings

Using the IVR Command
Reset default factory settings using the IVR prompt:

1. Dial “***” for voice prompt.
2. Enter “99” and wait for “reset” voice prompt.
3. Enter the encoded MAC address (Look below on how to encode MAC address).
4. Wait 15 seconds and device will automatically reboot and restore factory settings.

Encode the MAC Address

1. Locate the MAC address of the device. It is the 12-digit HEX number on the bottom of the unit.
2. Key in the MAC address. Use the following mapping:

Table 7: MAC Address Key Mapping

For example: if the MAC address is 000b8200e395, it should be keyed in as “0002228200333395”

Reset from Web Interface (Reset Type)

1. Access your HT818 UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings ? Reset Type
5. Press Reset button (after selecting the reset type).

• Full Reset: This will make a full reset
• ISP Data: This will reset only the basic settings, like IP mode, PPPoE and Web port
• VOIP Data Reset: This will reset only the data related with a service provider like SIP server, sip user ID, provisioning and others.

Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”.
If the HT818 were previously locked by your local service provider, pressing the RESET button will only restart the unit. The device will not return to factory default settings.

CHANGE LOG

This section documents significant changes from previous versions of the admin guide for HT818. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here.

• Firmware Version 1.0.45.2
  No Major changes

• Firmware Version 1.0.43.10
  

  • Added Charter CA to the approved certificate list.
  • Optimized Syslog makes it more user-friendly.
  • Added additional Flash Digit events. [Flash Digit Control]
  • GUI enhancement to display correctly port status.

• Firmware Version 1.0.41.2
  No major changes.

• Firmware Version 1.0.39.4
  Added Local IVR option that announces the extension number of the port. [Understanding HT818 Interactive Voice Prompt Response Menu]

• Firmware Version 1.0.37.1
  No major changes.

• Firmware Version 1.0.35.4
  No major changes.

• Firmware Version 1.0.33.4
  No major changes.

• Firmware Version 1.0.31.1
  No major changes.

• Firmware Version 1.0.29.8
  No major changes.

• Firmware Version 1.0.27.2
  No Major Changes

• Firmware Version 1.0.25.5
  No Major Changes.

• Firmware Version 1.0.23.5
  No Major Changes.

• Firmware Version 1.0.21.4
  Added support for “Play Busy Tone When Account is unregistered”. [Placing a Phone Call]

• Firmware Version 1.0.19.11
  No major changes.

• Firmware Version 1.0.17.5
  No major changes.

• Firmware Version 1.0.15.4
  Added support for GDMS.

• Firmware Version 1.0.13.7
  Added the support to verify if configured Gateway is on the same subnet as the configured IP address.

• Firmware Version 1.0.11.7
  No major changes

• Firmware Version 1.0.10.6

  • Added Web menu in Spanish.
  • Added support to display WAN/LAN port cable status on the Web UI.

• Firmware Version 1.0.9.3

  • Added support for G722 (wide-band) codec. [HT818 Technical Specifications]
  • Added support for FTP/FTPS for provision and firmware upgrade.[UPGRADING AND PROVISIONING]

• Firmware Version 1.0.8.7
  No major changes

• Firmware Version 1.0.5.18
  No major changes

• Firmware Version 1.0.0.5
  This is the initial version for HT818.

Need Support?
Can’t find the answer you’re looking for? Don’t worry we’re here to help!
CONTACT SUPPORT

Documents / Resources

| GRANDSTREAM HT818 Buy Grandstream Analog Telephone Adapter [pdf] User Guide
HT818 Buy Grandstream Analog Telephone Adapter, HT818, Buy Grandstream Analog Telephone Adapter, Grandstream Analog Telephone Adapter, Analog Telephone Adapter, Telephone Adapter, Adapter
---|---

References

• TFTPD64 : an opensource IPv6 ready TFTP server/service for windows : TFTP server
• FREE TFTP Server and SFTP/SCP Server | SolarWinds
• documentation.grandstream.com/knowledge-base/ht818-user-guide/?hkb-redirect&nonce=4695e6a97d&check=5h2t3&redirect=helpdesk.grandstream.com&otype=ht_kb_article&oid=64260&source=widget
• FileZilla - The free FTP solution
• Welcome! - The Apache HTTP Server Project

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>