Grandstream WPX9926R, WPX9926RE Outdoor WiFi 6 Enterprise Access Point User Guide

Grandstream WPX9926R, WPX9926RE Outdoor WiFi 6 Enterprise Access Point

Product Information

Specifications:

• LED Panel
• LED PWR
• 2.4GHz/5GHz Radios
• LAN (PoE in)
• SFP

Product Usage Instructions

Setup Requirements and Preparation:

To set up the WPX9926R/WPX9926RE unit, you will need:

• A computer with a web browser
• Two Cat 5e/6 Ethernet cables
• A ground wire (AWG: 10) for chassis grounding
• A PoE injector (purchased separately) or an 802.3bt-compliant PoE switch
• 2.4GHz/5GHz external antennae (purchased separately)
• Weatherproofing tapes for RF ports
• Screwdrivers (Phillips), a torque wrench, and a drill
• Wire stripping tool and crimping tool

Mounting Options:

Option 1: Pole Mount

1. Thread the hose clamps through the mounting slots on the unit.
2. Align the AP with a vertical pole.
3. Tighten the hose clamp using a torque wrench to secure the AP to the pole.

Option 2: Wall Mount

1. Mark locations on the wall for the mounting bracket holes.
2. Drill holes and insert anchors.
3. Secure the bracket to the wall.
4. Mount the WPX9926R/WPX9926RE unit to the bracket using screws.

Power Options and Cable Connection Instructions:

Option 1: 802.3bt-Compliant PoE Switch

1. Connect the unit to the PoE switch with an Ethernet cable.
2. Connect a computer to the switch with another Ethernet cable.
3. Wait for the power LED to turn solid blue before configuration.

Option 2: PoE Injector (purchased separately)

1. Connect the PoE injector ports accordingly.
2. Connect the PoE injector to an AC outlet.
3. Wait for the power LED to turn solid blue before configuration.

Change TCP/IP Setting on Your Computer:

For Windows 7/Windows 10 users:

1. Go to Control Panel, Network and Sharing Center, select Ethernet adapter properties.
2. Under Networking tab, set IP address to 192.168.1.2 and subnet mask to 255.255.255.0.
3. Save settings and close dialog boxes.

IMPORTANT NOTE:

FCC Radiation Exposure Statement: Maintain a minimum distance of 36cm between the radiator and your body during installation and operation.

Frequently Asked Questions

Q: What are the setup requirements for the WPX9926R/WPX9926RE unit

A: The setup requires a computer with a web browser, Ethernet cables, grounding wire, PoE injector or PoE switch, external antennae, tools for mounting, and weatherproofing tapes.

Q: How can I power up the WPX9926R/WPX9926RE for configuration?

A: You can use an 802.3bt-compliant PoE switch or a PoE injector connected to an AC outlet following the provided cable connection instructions.

WPX9926R/WPX9926RE
Outdoor Wi-Fi 6 Enterprise Access Point

Quick Setup Guide

Version 1.0

LED Panel

PWR

| Off| Power off
Amber| AP booting up
Blue| AP boot-up finished

2.4GHz/5GHz

Radios

| Off| Radio disabled
Blue| Radio enabled
Flashing Blue| Data transmitting/receiving

LAN (PoE in)

| Off| LAN (Ethernet) disconnected
Blue| LAN connected with 10/100/1000/2500Mbps of Ethernet speed
Flashing Blue| Data transmitting/receiving

SFP

| Off| Link disconnected
Blue| Link connected

Setup Requirements and Preparation

• A computer with a web browser
• Two Cat 5e/6 Ethernet cables
• A ground wire (AWG: 10) for chassis grounding
• A PoE injector (purchased separately) and a power cord; alternatively, an 802.3bt-compliant PoE switch to power up the WPX9926R/WPX9926RE
• 2.4GHz/5GHz external antennae (purchased separately)
• Weatherproofing tapes for RF ports
• Screwdrivers (Phillips), a torque wrench, and a drill
• Wire stripping tool and crimping tool

Mounting Options

Option 1: Pole Mount (1” – 2.5” of Pole Diameter)

1. Thread the open end of the hose clamps through the two mounting slots on the back of the WPX9926R/WPX9926RE unit.
2. Align the AP with a vertical pole.
3. Tighten the hose clamp to secure the AP to the pole with a torque wrench.

Option 2: Wall Mount

1. Mark locations on a wall surface for the four mounting holes of the mounting bracket. Use an appropriate drill bit to drill holes (Diameter: 6.5mm and Depth: 30mm).
2. Screw the anchors into the holes and then insert the screws through the mounting bracket into the anchors. Tighten the screws to secure the bracket to the wall.
3. Align the WPX9926R/WPX9926RE unit with the mounting bracket.
4. Lock the WPX9926R/WPX9926RE in place with the four screws using a Phillips #2 screwdriver.

Power Options and Cable Connection Instructions

Follow one of the options below to power up the WPX9926R/WPX9926RE for configuration.

Option 1: 802.3bt-Compliant PoE Switch

1. Connect the WPX9926R/WPX9926RE to an 802.3bt-compliant PoE switch with an Ethernet cable.
2. Connect a computer to the switch with another Ethernet cable.
3. When the power LED turns into a solid blue light, it is ready for configuration.

Option 2: PoE Injector (purchased separately)

1. Connect the PoE injector’s ports as follows with Ethernet cables.
   PoE Port: To the WPX9926R/WPX9926RE
   LAN Port: To a computer

2. Connect the PoE injector to the AC power socket using a power cord.

3. When the power LED turns into a solid blue light, it is ready for configuration.

Change TCP/IP Setting on Your Computer
For Windows 7/Windows 10 users,

1. Go to Control Panel, click Network and Sharing Center and then choose the Ethernet adapter that is in connection with the WPX9926R/WPX9926RE unit. Click it and then click Properties.

2. Under the Networking tab, select Internet Protocol Version 4 (TCP/IPv4) in the list box “This connection uses the following items”, and then click Properties.

3. Type in the following IP address and Subnet mask:
   IP address: 192.168.1.2
   Subnet mask: 255.255.255.0

4. Click OK to close the Internet Protocol Version 4 (TCP/IP) Properties dialog box and click OK again to close the adapter Properties dialog box.

Federal Communication Commission Interference Statement (FCC) – USA

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 36cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>