GRANDSTREAM GWN7706 48 Unmanaged Gigabit Port and 2 SFP Port Switch Installation Guide

GRANDSTREAM GWN7706 48 Unmanaged Gigabit Port and 2 SFP Port Switch

Product Information

The GWN7706 is an unmanaged Gigabit switch with 48 Ethernet ports and 2 SFP ports. It is designed for use in network infrastructures that require high- speed data transfer capabilities. The switch can be installed on a desktop or a standard 19-inch rack using the included accessories. It is compatible with various devices such as PC, access points, IP phones, routers, and fiber connections.

• The switch is manufactured by Grandstream Networks, Inc., a company based in Boston, USA. For Certification, Warranty, and RMA information, customers can visit their official website at
• www.grandstream.com.
  The operating humidity range of the switch is 10% to 90% noncondensing, and the storage humidity range is 10% to 90% noncondensing.

Product Usage Instructions

Desktop Installation

1. Place the bottom of the switch on a sufficiently large and stable table.
2. Peel off the rubber protective paper of the four footpads one by one, and stick them in the corresponding circular grooves at the four corners of the bottom of the case.
3. Flip the switch over and place it smoothly on the table.

Rack Installation

1. Check the grounding and stability of the rack.
2. Install the two L-shaped rack-mounting accessories on both sides of the switch and fix them with the provided screws (KM 3*6).
3. Place the switch in a proper position in the rack and support it by the bracket.
4. Fix the L-shaped rack-mounting to the guide grooves at both ends of the rack with screws (prepared by yourself) to ensure that the switch is stable and horizontally installed on the rack.

CONNECTION

• Operating Temperature: 0 to 45 °C (32 to 113 °F)
• Storage Temperature : -30 to 70 °C (-30 to 158 °F)
• Operating Humidity: 10% to 90% Noncondensing
• Storage Humidity: 10% to 90% Noncondensing
• Ethernet Port: 10/100/1000 Mbps RJ-45 port
  SFP Port

INSTALLATION

Install on the Desktop

1. Place the bottom of switch on a sufficiently large and stable table.
2. Peel off the rubber protective paper of the four footpads one by one, and stick them in the corresponding circular grooves at the four corners of the bottom of the case.
3. Flip the switch over and place it smoothly on the table.

Install on a 19” Standard Rack

1. Check the grounding and stability of the rack.
2. Install the two L-shaped rack-mounting in the accessories on both sides of switch, and fix them with the screws provided (KM 3*6).
3. Place the switch in a proper position in the rack and support it by the bracket.
4. Fix the L-shaped rack-mounting to the guide grooves at both ends of the rack with screws (prepared by yourself) to ensure that the switch is stable and horizontally installed on the rack.

For Certification, Warranty and RMA information, please www.grandstream.com visit: www.grandstream.com

References

• Grandstream Networks - Networking & Unified Communications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>