Grandstream GWN7803P Enterprise Layer 2 Managed Network Switch User Manual
- May 15, 2024
- GRANDSTREAM
Table of Contents
Grandstream GWN7803P Enterprise Layer 2 Managed Network Switch
Product Information
Specifications
- Model: GWN7803P
- Product Type: Air Ventilation Fan
- Ports: 24 Ethernet Ports, 4 SFP Ports
- LED Indicators: Power, Ethernet Ports, SFP Ports, System Status
| Feature | Description |
|---|---|
| Model | GWN7800 Series |
| Ports & LED Indicator | Ports for Ethernet, SFP, Console, and Grounding |
| Power Supply | 100-240VAC 50-60Hz |
| LED Status Indicators | Indicators for Power, System, Port, and Protective |
Grounding
Package Contents| Switch, Screws, AC Cable, Ground Cable, Rubber Pads, Quick
Installation Guide, Anti-Trip Cable, Rack Mount Kit
Installation Methods| Desktop, Wall, Standard 19″ Rack
Remote Management| Supports SSH/Telnet, GWN.Cloud, GWN Manager
Product Usage Instructions
Power Supply & Connection
- Insert the grounding cable into the grounding terminal of the switch.
- Tighten the screw with a screwdriver securely.
- Connect the other end of the grounding cable to the general grounding point in the room.
Port Connection
To connect to the RJ45 port:
- Observe the status of the port indicator for connection status.
- Ensure the RJ45 cable is securely connected to the port.
To connect to the SFP port:
- Connect the appropriate fiber module based on multimode or single-mode specifications.
- Use a console cable (not included) to connect the switch to a PC for configuration.
Installation
For desktop installation:
To install the switch on a desktop, remove the protective rubber layer from
the cushioning pads and place them in the circular slots at the corners of the
switch’s underside. Then, flip the switch and gently place it on the table.
For wall mounting, use the provided screws to secure the switch in a
horizontal position on the selected wall. For rack installation, use the
L-shaped rack mount supports and screws to ensure the switch is securely
installed in the rack.
Connection and Power Supply
Connect the power cable to the switch first, then plug the power supply
into the equipment room’s power system. For grounding, remove the grounding
screw from the back panel of the switch, connect one end of the grounding
cable to the screw hole, and tighten with a screwdriver. Attach the other end
of the grounding cable to a general ground connection in the room.
Ports and Indicators
-
Ethernet Ports 1-8: RJ45 connectors used to connect terminals. Note: GWN7801P, GWN7802P, GWN7803P support PoE and PoE+.
-
SFP Ports: For connecting 1000 Mbps fiber modules.
-
Console Port: For connecting the management PC.
-
Reset Button: Press for 5 seconds to reset to factory settings.
-
System Indicator: LED indicating system status.
-
Power Socket: For power supply.
-
Grounding Post: For lightning protection.
-
Fan: To maintain optimal operating temperature.
-
Place rubber pads on the bottom of the switch.
-
Screw the switch onto the table using mounting brackets (not included).
Access & Configuration
For remote login via SSH/Telnet:
- Enable Telnet on the switch.
- Open cmd on your PC.
- Enter telnet command in cmd.
- Use standard username and password for login (found on the GWN7800Switch sticker).
For configuration via GWN.Cloud / GWN Manager:
- Visit https://www.gwn.cloud in your browser and log in with your account credentials.
- If you do not have an account, register first or ask your administrator to assign one.
Regulatory Information
This device complies with part 15 of the FCC Rules. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For any issues, contact Grandstream Networks, Inc. located at 126 Brookline Ave, 3rd Floor, Boston, MA 02215, USA.
Frequently Asked Questions (FAQ)
Where can I download the detailed user manual?
The detailed user manual can be downloaded from Grandstream Networks’
official website.
How do I access the switch’s GPL source code?
You can access the GPL source code via the device’s web interface or request a
CD by emailing [email protected].
How do I check if my switch is powered on?
The system LED indicator will be lit up when the switch is powered on. If it's off, the switch is not receiving power.
What should I do if the upgrade fails?
If the upgrade fails, contact customer support for assistance and avoid further attempts without guidance.
How do I reset the switch to factory settings?
Press the reset button for 5 seconds.
What should I do if I experience trouble with the equipment?
Contact Grandstream Networks, Inc. using the provided contact details.
How can I manage the switch remotely?
You can manage the switch remotely via SSH/Telnet, GWN.Cloud, or GWN Manager.