GRANDSTREAM GSC3574 HD Intercom and Facility Control Station Installation Guide

GRANDSTREAM GSC3574 HD Intercom and Facility Control Station

Product Information

• Specifications
  • Model: GSC3574/3575
  • Type: HD Intercom & Facility Control Station
  • Manufacturer: Grandstream Networks, Inc.
  • Address: 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA
  • Contact: Tel: +1 (617) 566 – 9300,
  • Website: www.grandstream.com.

Product Usage Instructions

• Device Installation
  • Drill six holes in the wall according to the positions of the screw anchors.
  • Secure the screw anchors into the holes.
  • Connect the cables to the appropriate ports on the GSC3574/3575 device.
  • Attach the device to the wall using the provided fixation screws.
  • Align the slots on the device’s back with the metal bracket and secure it in place.
• On-Wall Glass Adhesive Mount
  • Clean the glass surface before installation.
  • Apply double-sided adhesive to the device for mounting.
  • Secure the equipment by aligning the slots on the device’s back with their placement on the wall and pressing down firmly.

GSC3574/3575 Ports

FAQs

• Q: Can the GSC3574/3575 be used to contact emergency services?
  • A: No, Grandstream Networks explicitly states that the GSC3574/3575 cannot be used to contact emergency services.
• Q: How can I access the GNU GPL license terms for the device?
  • A: The GNU GPL license terms are accessible via the Web user interface of the device or by visiting http://www.grandstream.com/legal/opensource-software.

INTRODUCTION

• The GSC3574/3575 is not pre-configured to support or make emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services.
• It is your responsibility to purchase a SIP-compliant Internet telephone service, properly configure the GSC3574/3575 to use that service, and periodically test your configuration to confirm that it works as you expect.
• It is also your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services.
• GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE GSC3574/3575.
• NEITHER GRANDSTREAM NOR ITS OFFICES, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE GSC3574/3575 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES BY THE IMMEDIATELY PRECEDING PARAGRAPH.
• The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed here: http://www.grandstream.com/legal/open-source-software.
• To obtain a CD with GPL source code information please submit a written request to info@grandstream.com.

PACKAGE CONTENTS

• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -10 °C to 40 °C in operation and -10 °C to 60 °C in storage.
• Do not expose the GSC3574/3575 to environments outside of the following humidity range: 10-90% RH (non-condensing).
• Do not power cycle your GSC3574/3575 during system boot-up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.

OVERVIEW

• The GSC3574/3575 is a powerful intercom and facility control station designed to provide businesses with a dedicated device to manage facility communications, door access, physical security and more.
• This device can be wall-mounted as a solution for easy door control, intercom and paging communication, security camera management and facility-wide UC integration.
• The GSC3574/3575 features a 7-inch touchscreen LCD and full duplex 2-way HD audio.
• lt offers flexible network connectivity through a 100Mbps network port with PoE or integrated dual-band Wi-Fi 6 support.
• This SIP intercom and facility control station is designed to seamlessly integrate with Grandstream’s entire range of products, including the GDS series of door access devices, GSC series intercom and paging devices, security cameras and more.
• The GSC3574/3575 is ideal for any deployment scenario where facility access, communications and security need to be centrally monitored and controlled.

PACKAGE CONTENTS

GSC3574/3575 SETUP

DEVICE INSTALLATION

The GSC3574/3575 can be mounted on the wall, the glass, or on the desktop using a 20 ° bracket. Please refer to the following steps for installation:

On-Wall 0° Mount

1. Drill six holes on the wall referring to the positions of the ones on the 0° installation bracket, then put the screw anchors on the position of the holes.
2. Fix the 0° installation bracket on the wall with the self-tapping screws on the positions defined.
3. Make sure the 0° installation bracket is installed properly as shown in the illustration.
4. Plug in the cables to the proper GSC3574/3575 ports on the back, and fix the 0° installation bracket with the GSC3575/74 device using the two fixation screws from the bottom of the device.
5. Align the position slots on the device’s back with their correct placement on the metal bracket, then fix it by pushing it down.

On-Wall 20° Mount

1. Drill six holes on the wall referring to the positions of the ones on the 20° installation bracket, then put the screw anchors on the position of the holes.
2. Fix the 20° installation bracket on the wall with the self-tapping screws on the positions defined.
3. Make sure the 20° installation bracket is installed properly as shown in the illustration.
4. Plug in the cables to the proper GSC3574/75 ports on the back, and fix the 20° installation bracket with the GSC3575/74 device using the two fixation screws from the bottom of the device.
5. Align the position slots on the device’s back with their correct placement on the 20° installation bracket, then fix it by pushing down.

On-Wall Glass Adhesive Mount

1. Clean the glass before installation
2. Stick the Glass Adhesive tape to the 20° installation bracket.
3. Install the 20° installation bracket with its glass ade
   • sive tape on the glass.
4. After installing with double-sided adhesive, please use additional adhesive to fix the equipment.
5. Plug in the cables to the proper GSC3574/75 ports on the back, and fix the 20° installation bracket with the GSC3575/74 device.
6. Align the position slots on the device’s back with their correct placement on the 20° installation bracket, then fix it by pushing down.

GSC3574/3575 PORTS

detection, IN+ connect the sensor’s positive signal output, IN Active voltage range 9‐15V
2| IN8+
3| IN7‐| Alarm IN7 (Active)
4| IN7+
5| GND| Power Supply| DC12V recommend, input voltage range 11‐13V Current at least 1.5A@12V
6| +12V
J2| 1| NO1| Alarm OUT1| Relay output, normal open or close, max 125VAC/0.5A or max 30VDC/2A
2| COM1
3| NC1
4| NO2| Alarm OUT2
5| COM2
6| NC2
7| GND| Alarm GND| Voltage reference for IN+, Switch signal reference for AIN (1/2/3/4/5/6)
8| IN1| Alarm IN1(Passive)| Alarm input, for button/door contacts, switch signal detection. Please connect the Switch/button to AIN (1/2/3/4/5/6) and GND
9| IN2| Alarm IN2(Passive)
10| IN3| Alarm IN3(Passive)
11| IN4| Alarm IN4(Passive)
12| IN5| Alarm IN5(Passive)

13

|

IN6

|

Alarm IN6(Passive)

J3| Micro‐SD Port| Data Storage| Support microSD/SDHC/SDXC, up to 512G
J4| Network Port(PoE)| Ethernet and PoE Supply| Single 10/100 Mbps Network port, support POE power supply with class AF mode
J5| USB Port| Data Exchange| The USB port can be connected to a USB disk (up to 2TB) / mouse/ keyboard.

GSC3574/3575 CONFIGURATION

Configure the GSC3574/3575 Using a Web Browser:

1. Ensure your device is powered up and connected to the Internet.
2. Press “Settings” on the Home Page.
3. Select “Network Status” to check the IP address.
4. Type the unit’s IP address in your PC browser. (See figure below).
5. Enter admin’s username and password to access the configuration menu. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit).

Configure the GSC3574/3575 from the LCD MENU:

1. Make sure the device is idle.
2. Press “Settings”. Browse the GSC3574/3575 MENU for Status, Network information, Features and Basic/Advanced Settings…
3. Refer to online documents and FAQ for more detailed information: http://www.grandstream.com/our-products.

CONTACT

• Grandstream Networks, Inc.
• 126 Brookline Ave, 3rd Floor
• Boston, MA 02215. USA
• Tel: +1 (617) 566 – 9300
• www.grandstream.com.
• For Certification, Warranty and RMA information, please visit www.grandstream.com.

MODELS

References

• Products | Grandstream Networks

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>