ROUGH COUNTRY 82284 LED Ditch Light Kit Instructions
- August 19, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY 82284 LED Ditch Light Kit
Product Information
- Product Name: CHEVY 1999-2006 1500 DITCH MOUNTS
- Manufacturer: Rough Country
Specifications:
- Kit Contents: Driver Light Bracket, Passenger Light Bracket
- Tools Required: 13mm Wrench or Socket
Installation Instructions:
- Lift the hood of the truck.
- Loosen, but do not remove the bottom two hood bolts with a 13mm wrench. See Photo 1.
- Align the slots of the bracket with the loosened bolts and tighten the hood bolts with a 13mm wrench. See Photo 2.
- Remove front wheel well fasteners.
- Install light bracket.
- Repeat for the other side of the vehicle.
- Install the lights onto the bracket using the hardware that comes with the lights. See Photo 3.
- Wire ditch lights to preference.
Frequently Asked Questions (FAQ):
-
What tools are required for installation?
A 13mm wrench or socket is required for installation. -
How do I align the bracket with the hood bolts?
Align the slots of the bracket with the loosened bolts and tighten them with a 13mm wrench. -
Can I install the lights on my own?
Yes, you can install the lights onto the bracket following the provided instructions.
Thank you for choosing Rough Country for all your vehicle needs.
Please read instructions before beginning installation. Check the kit hardware
against the kit contents shown below. Be sure you have all needed parts and
know where they go.
If question exist, please call us at
@1-800-222-7023. We will be happy to
answer any questions concerning this product.
Check all fasteners for proper torque. Check to ensure for adequate clearance
between all components.
Periodically check all hardware for tightness.
KIT CONTENTS
- Driver Light Bracket
- Passenger Light Bracket
TOOLS REQUIRED:
13mm Wrench or Socket
Torque Specification
INSTALLATION
- Lift the hood of the truck.
- Loosen, but do not remove the bottom two hood bolts with a 13mm wrench. See Photo 1.
- Align the slots of the bracket with the loosened bolts and tighten the hood bolts with a 13mm wrench. See Photo 2
- Repeat for other side of vehicle.
- Install the lights onto the bracket using the hardware that comes with the lights. See Photo 3.
- Wire ditch lights to preference.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>