BAUHN 712818STAND 3 In 1 Wireless Charging Stand User Manual
- August 17, 2024
- BAUHN
Table of Contents
BAUHN 712818STAND 3 In 1 Wireless Charging Stand
Product Information
Specifications
- Product Name: 3-IN-1 Wireless Charging Stand
- Applicable Devices: Devices with built-in quick charge/normal charge wireless receiver or outer-face wireless charging receiver
- Standard Accessories:
- 1* Multifunctional Wireless Charger
- 1* USB Type C Cable
- 1* User Manual
- 1* Magnet Adhesive Ring
Product Usage Instructions
- Connecting the Wireless Charger:
- Plug the wireless charger into the AC power supply using a power adapter (not included) and the provided USB Type C cable.
- The charger will enter standby mode, indicated by a red light.
- Charging Your Device:
- Place your device vertically or horizontally in the center of the Wireless Charger.
- Wait for your device to begin charging; the indicator light will turn red & blue.
FAQ
-
Q: What devices are compatible with the wireless charger?
A: Devices with built-in quick charge/normal charge wireless receiver or outer-face wireless charging receiver are compatible with the charger. -
Q: How can I contact customer support for further assistance?
A: You can reach out to ALDI Inc. at the provided contact details or visit their website for more information.
3-IN-1 WIRELESS
CHARGING STAND
Thanks for purchasing our multifunctional wireless charger
User Manual
PRODUCT OUTLINE
Applicable Devices
- Devices with built-in quick charge/normal charge wireless receiver.
- Devices with outer-face wireless charging receiver.
Usage Instructions
- Connect the wireless charger to the AC power supply through the power adapter(adapter not included) and a type C charging cable(included), the wireless charger enters the standby mode, the indicator light keeps in red. ***The mobile Phone wireless charging panel is magnetic, if your mobile phone support wireless charging, but without Magsafe, you can stick the Magnet Ring (one piece included) onto your mobile phone wireless charging area, this ring help suck your phone onto the mobile Phone wireless charging panel, then you can charging on the panel.
- Take off the magnet ring adhesive cover, and stick onto correct charging area, press to stick and do not move in hours to stick firmly.
- Magnet Ring cannot be steady stick onto glass surface, if your phone is glass surface you can have a flat thin phone case in other material, and adhesive the ring onto the phone case.
- Place your device vertically or horizontally in the center of the Wireless Changer until your device begins to charge, the indicator light keeps in Red&Blue.
- If magnetic wireless charging panel and earbud panel both in charging, the indicator light change into blue.
- It is highly recommended to charge your watch when the watch is around 10% power, if you use out of all power, charging will be much slower, you need to have patience for wait!
Specifications
- Input voltage: 5V/3A 9V/3A(QC)
- Output power:
- Magnetic mobile phone charging panel: max 15W/10W/ 7.5W/5W
- Earbud charging panel: max 5W
- iWatch charging panel: max 2.5W
- Charging efficiency: 70%-80%
Standard Accessories
- 1* Multifunctional Wireless Charger
- 1* USB type C Cable
- 1* User Manual
- 1* Magnet adhesive Ring
Attention
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is power off.
- Using Environment temperature remain 1-45℃ degree
FCC INSTRUCTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.”
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Distributed by: ALDI Inc. Batavia, IL 60510
www.ALDI.us
Contact: info@xtremetime.com
(US)1-888-204-0934
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>