Euromaid EMFS60SOCERSS Free Standing Cooker User Manual

Free Standing Cooker
User Manual

EMFS60SOCERSS

Thank you for choosing this product.
This User Manual contains important safety information and instructions on the operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this book for future reference.

SAFETY INSTRUCTIONS

• Carefully read all instructions before using your appliance and keep them in a convenient place for reference when necessary.
• This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. For this reason, it is important to pay particular attention to any figures whilst reading the operating manual.

General Safety Warnings

• This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.
  WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Keep children less than 8 years of age away unless they are continually supervised.
  WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.NEVER try to extinguish such a fire with water, but switch off the appliance and cover the flame with a lid or a fire blanket.
  CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously
  WARNING: Danger of fire: Do not store items on the cooking surfaces.
  WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.

• For models which incorporate a hob lid, clean any spillages off the lid before use and allow the cooker to cool before closing the lid.

• Do not operate the appliance with an external timer or separate remote-control system.
  WARNING: To prevent the appliance tipping, the stabilizing brackets must be installed. (For detailed information refer to the anti-tilting kit set guide.)
  

• During use, the appliance will get hot. Care should be taken to avoid touching heating elements inside the oven.

• Handles may become hot after a short period of time during use.

• Do not use harsh abrasive cleaners or scourers to clean oven surfaces. They can scratch the surfaces which may result in shattering of the door glass or damage to surfaces.

• Do not use steam cleaners to clean the appliance.
  WARNING: To avoid the possibility of electric shocks, make sure that the appliance is switched off before replacing the lamp.
  CAUTION: Accessible parts may be hot when cooking or grilling. Keep young children away from the appliance when it is in use.

• Your appliance is produced in accordance with all applicable local and international standards and regulations.

• Maintenance and repair work should only be carried out by authorized service technicians. Installation and repair work that is carried out by unauthorized technicians may be dangerous. Do not alter or modify the specifications of the appliance in any way. Inappropriate hob guards can cause accidents.

• Before connecting your appliance, make sure that the local distribution conditions (nature of the gas and gas pressure or electricity voltage and frequency) and the specifications of the appliance are compatible. The specifications for this appliance are stated on the label.
  CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic household use only. It should not be used for any other purpose or in any other application, such as for non-domestic use, in a commercial environment, or for heating a room.

• Do not use the oven door handles to lift or move the appliance.

• All possible measures have been taken to ensure your safety. Since the glass may break, care should be taken while cleaning to avoid scratching. Avoid hitting or knocking the glass with accessories.

• Make sure that the supply cord is not trapped or damaged during installation. If the supply cord is damaged, it must be replaced by the manufacturer,its service agent or similarly qualified persons in order to prevent a hazard.

• Do not let children climb on the oven door or sit on it while it is open.

• Please keep children and animals away from this appliance.

Installation Warnings

• Do not operate the appliance before it is fully installed.

• The appliance must be installed by an authorized technician. The manufacturer is not responsible for any damage that might be caused by incorrect placement and installation by unauthorized people.

•  When the appliance is unpacked, make sure that it has not been damaged during transportation.
  In the case of a defect, do not use the appliance and contact a qualified service agent immediately.
  The materials used for packaging (nylon, staplers, styrofoam, etc.) may be harmful to children and they should be collected and removed immediately.

• Protect your appliance from the atmosphere. Do not expose it to sun, rain, snow, dust, or excessive humidity.

• Materials around the appliance (i.e. cabinets) must be able to withstand a minimum temperature of 100°C.

• The appliance must not be installed behind a decorative door, in order to avoid overheating.

 During Use

• When you first use your oven you may notice a slight smell. This is perfectly normal and is caused by the insulation materials on the heater elements.
  We suggest that, before using your oven for the first time, you leave it empty and set it at maximum temperature for 45 minutes. Make sure that the environment in which the product is installed is well ventilated.

• Take care when opening the oven door during or after cooking. The hot steam from the oven may cause burns.

• Do not put flammable or combustible materials in or near the appliance when it is operating.

• Always use oven gloves to remove and replace food in the oven.

• Under no circumstances should the oven be lined with aluminum foil as overheating may occur.

• Do not place dishes or baking trays directly onto the base of the oven whilst cooking. The base becomes very hot and damage may be caused to the product.
  Do not leave the cooker unattended when cooking with solid or liquid oils. They may catch fire under extreme heating conditions. Never pour water onto flames that are caused by oil, instead switch the cooker off and cover the pan with its lid or a fire blanket.

• Always position pans over the center of the cooking zone, and turn the handles to a safe position so they cannot be knocked.

• If the product will not be used for a long period of time, turn the main control switch off. Turn the gas valve off when gas appliances are not in use.

• Make sure the appliance control knobs are always in the “0” (stop) position when the appliance is not in use.

• The trays incline when pulled out. Take care not to spill or drop hot food when removing it from the oven.

• Do not place anything on the oven door when it is open. This could unbalance the oven or damage the door.

• Do not place heavy or flammable items (e.g. nylon, plastic bags, paper, cloth, etc.) into the drawer. This includes cookware with plastic accessories (e.g. handles).
  CAUTION: The inside surface of the storage compartment may get hot when the appliance is in use. Avoid touching the inside surface.

• Do not hang towels, dishcloths, or clothes from the appliance or its handles.

During Cleaning and Maintenance

• Make sure that your appliance is turned off at the mains before carrying out any cleaning or maintenance operations.
• Do not remove the control knobs to clean the control panel.
• To maintain the efficiency and safety of your appliance, we recommend you always use original spare parts and call our authorized service agents when needed. Disposal of your old machine

| This symbol on the product or on its packaging indicates that this product should not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local city office, your household waste disposal service, or the retailer from who you purchased this product.
---|---

 INSTALLATION AND PREPARATION FOR USE

WARNING: This appliance must be installed by an authorized service person or qualified technician, according to the instructions in this guide and in compliance with the current local regulations.

•  Incorrect installation may cause harm and damage, for which the manufacturer accepts no responsibility and the warranty will not be valid.
• Prior to installation, ensure that the local distribution conditions (electricity voltage and frequency and/or nature of the gas and gas pressure) and the adjustments of the appliance are compatible. The adjustment conditions for this appliance are stated on the label.
• The laws, ordinances, directives, and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.).

Instructions for the Installer

General instructions

• After removing the packaging material from the appliance and its accessories, ensure that the appliance is not damaged. If you suspect any damage, do not use it and contact an authorized service person or qualified technician immediately.
• Make sure that there are no flammable or combustible materials in the close vicinity, such as curtains, oil, cloth, etc. which may catch fire.
• The worktop and furniture surrounding the appliance must be made of materials resistant to temperatures above 100°C.
• The appliance should not be installed directly above a dishwasher, fridge, freezer, washing machine, or clothes dryer.
• The appliance can be placed close to other furniture on the condition that, in the area where the appliance is set up, the furniture’s height does not exceed the height of the cooktop.

Installation of the Cooker

•  If the kitchen furniture is higher than the cooktop, the kitchen furniture must be at least 10 cm away from the sides of the appliance for air circulation.
• If a cooker hood or cupboard is to be installed above the appliance, the safety distance between the cooktop and any cupboard/cooker hood should be as shown below.

A (mm) Cupboard

|

420

---|---

B (mm) Cooker Hood

|

650/700

C (mm)

|

Product Width

D (mm)

|

50

 Electrical Connection and Safety

WARNING: The electrical connection of this appliance should be carried out by an authorized service person or qualified electrician, according to the instructions in this guide and in compliance with the current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.

• Before connecting the appliance to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the appliance’s power rating (also indicated on the identification plate).
• During installation, please ensure that isolated cables are used. An incorrect connection could damage your appliance. If the mains cable is damaged and needs to be replaced this should be done by qualified personnel.
• Do not use adaptors, multiple sockets, and/or extension leads.
• The supply cord should be kept away from hot parts of the appliance and must not be bent or compressed. Otherwise, the cord may be damaged, causing a short circuit.
• If the appliance is not connected to the mains with a plug, a all-pole disconnector (with at least 3 mm contact spacing) must be used in order to meet the safety regulations.
• The appliance is designed for a power supply of 220-240 V~. If your supply is different, contact the authorized service personnel or qualified electrician.
• The power cable (H05VV-F) must be long enough to be connected to the appliance.
• The fused switch must be easily accessible once the appliance has been installed.
• Ensure all connections are adequately tightened.
• Fix the supply cable in the cable clamp and then close the cover.
• The terminal box connection is placed on the terminal box.

 Safety Chain

The appliance can be prevented from falling over by securing the supplied safety chain to the rear of the cooker.
Use a wall plug to fasten the hook (1) to the kitchen wall and connect the safety chain (3) to the hook with the help of the locking mechanism.

1. – Hook
2. – Locking mechanism
3. – Safety chain (mounted to the appliance)
4. – Tightly fix the chain to the cooker rear
5. – Rear of cooker
6. – Kitchen wall

The safety chain should be as short as practically possible to avoid the cooker tilting forward.

 Adjusting the feet

Your product stands on four adjustable feet. For safe operation, it is important that your appliance is correctly balanced. Make sure the appliance is level prior to cooking.
To increase the height of the appliance, turn the feet anti-clockwise. To decrease the height of the appliance, turn the feet clockwise.
It is possible to raise the height of the appliance up to 30 mm by adjusting the feet. The appliance is heavy and we recommend that a minimum of 2 people lift it. Never drag the appliance.

 PRODUCT FEATURES

Important: Specifications for the product vary and the appearance of your appliance may differ from that shown in the figures below.
List of Components

1.  Cooktop
2.  Control Panel
3.  Oven Door Handle
4.  Oven Door
5. Adjustable Feet

Control Panel

6. Timer
7. Oven Function Control Knob
8. Oven Thermostat Knob
9. Hob Control Knob

USE OF PRODUCT

4.1 Hob controls

Ceramic Heater
The ceramic heater is controlled by a 6 position knob.
The ceramic heater is operated by turning the control knob to the required setting. Near each control, a knob is a symbol that indicates the heater that is controlled by that knob. The on/off light on the control panel will show if any of the ceramic heaters are in use.

Knob Position

|

Function

---|---

0

|

Off position

1

|

Keep warm position

2-3

|

Heating position at low heat

4-5-6

|

Cooking, roasting, and boiling position

Important: The knob rotation direction may differ according to the product specification.
Dual and Oval Heaters (if available)
Dual and oval heaters have two heating zones. To activate the outer zone of a dual/ oval heater, turn the knob to the position.
Both outer zones will switch on.
To deactivate the outer zone of a dual/oval heater, turn the knob to the ‘Off’ position.
Both outer zones will switch off.

Residual Heat Indicator (if available)
After using the hob there will be heat stored in the vitroceramic glass called residual heat. If the residual heat level is greater than +60°C, the residual heat indicator will be active for the cooking zone which is above this temperature.

If the power supply to the hob is disconnected while the residual heat indicator is on, the warning light will flash when the power is reconnected. The display will flash until the residual heat has decreased or until one of the cooking zones is activated.

Hints and Tips

Important: When ceramic heaters are operated in higher heat settings, the heated areas may be seen switching on and off. This is due to a safety device that prevents the glass from overheating. This is normal at high temperatures, causing no damage to the hob and little delay in cooking times.

WARNING:

•  Never operate the hob without pans on the cooking zone.

• Use only flat saucepans with a sufficiently thick base.

• Make sure the bottom of the pan is dry before placing it on the hob.

• While the cooking zone is in operation, it is important to ensure that the pan is centered correctly above the zone.

• In order to conserve energy, never use a pan with a different diameter to the hotplate being used.
  

• Do not use pans with rough bottoms since these can scratch the glass-ceramic surface.

• If possible, always place lids on the pans.

• The temperature of accessible parts may become high while the appliance is operating. Keep children and animals well away from the hob during operation and until it has fully cooled after the operation.

• If you notice a crack on the cooktop, it must be switched off immediately and replaced by authorized service personnel.

 Oven Controls

Oven function control knob
Turn the knob to the corresponding symbol of the desired cooking function. For the details of different functions see ´Oven Functions.

Oven thermostat knob
After selecting a cooking function, turn this knob to set the desired temperature. The oven thermostat light will illuminate whenever the thermostat is in operation to heat up the oven or maintain the temperature.

Oven Functions

• The functions of your oven may be different due to the model of your product.

Defrost Function:

The oven’s warning lights will switch on and the fan will start to operate. To use the defrost function, place your frozen food in the oven on a shelf in the third slot from the bottom. It is recommended that you place an oven tray under the defrosting food to catch the water accumulated due to melting ice. This function will not cook or bake your food, it will only help to defrost it.

Turbo Function:

The oven’s thermostat and warning lights will switch on, and the ring heating element and fan will start operating. The turbo function evenly disperses the heat in the oven so all food on all racks will cook evenly. It is recommended that you preheat the oven for about 10 minutes.

Static Cooking Function:

The oven’s thermostat and warning lights will switch on, and the lower and upper heating elements will start operating. The static cooking function emits heat, ensuring
even cooking of food. This is ideal for making pastries, cakes, baked pasta, lasagne, and pizza. Preheating the oven for 10 minutes is recommended and it is best to use only one shelf at a time in this function.

Fan Function:

The oven’s thermostat and warning lights will switch on, and the upper and lower heating elements and fan will start operating. This function is good for baking pastry. Cooking is carried out by the lower and upper heating elements within the oven and by the fan, which provides air circulation, giving a slightly grilled effect to the food. It is recommended that you preheat the oven for about 10 minutes.

Grilling Function:

The oven’s thermostat and warning lights will switch on, and the grill heating element will start operating. This function is used for grilling and toasting foods on the upper
shelves of the oven. Lightly brush the wire grid with oil to stop food sticking and place food in the center of the grid. Always place a tray beneath the food to catch any drips
of oil or fat. It is recommended that you preheat the oven for about 10 minutes.

Warning: When grilling, the oven door must be closed and the oven temperature should be adjusted to 190°C.

Grill and Fan

Function:

The oven’s thermostat and warning lights will switch on, and the grill heating element and fan will start operating. This function is ideal for grilling thicker food. Use the upper
shelves of the oven, lightly brush the wire grid with oil to stop food sticking and place food in the center of the grid. Always place a tray beneath the food to catch any drips of oil or
fat.
Warning: When grilling, the oven door must be closed and the oven temperature should be adjusted to 190°C.

Use of the Digital Touch Timer

Function Description

**A**

|

Auto cooking

|

Manual cooking

|

Key Lock

|

Minute minder

**Mode**

|

Mode function

**+**

|

Decrease timer

**_**

|

Increase timer

|

Timer display

Time adjustment
The time must be set before you start using the oven. Following the power connection, the symbol “A” and “00:00” or “12:00” will flash on the display.

1. Press the “MODE” for 2 sec to deactivate the keylock and the dot in the middle of the screen will start to flash.
   

2. Adjust the time while the dot is flashing using the “+” and “-” keys.
   

3. After a few seconds, the dot will stop flashing and will remain illuminated.
   

Key Lock
The key lock automatically activates after the timer has not been used for 7 seconds. “ ” symbol will appear and remain illuminated. To unlock the timer buttons, press and hold the “MODE” button for 2 seconds. The desired operation can then be carried out.

Audible warning time adjustment
The audible warning time can be set to any time between “00:00” and “23:59” hours. The audible warning time is for warning purposes only. The oven will not be activated with this function.

1. Press “MODE”. The symbol “ ” will begin to flash and “000” will be displayed.
   

2. Select the desired time period using the “**+**” and “**-**” keys while “ ” is flashing.
   

3. The symbol “ ” will remain illuminated, the time will be saved and the warning will be set.
   

When the timer reaches zero, an audible warning will sound and the symbol “ ” will flash on the display. Press any key to stop the audible warning. Press “MODE” for 2 seconds the “ ” symbol will disappear and the clock will be displayed.
Semi-automatic time adjustment (cooking period)

This function helps you to cook for a fixed period of time. A time range between 0 and 10 hours can be set. Prepare the food for cooking and put it in the oven.

1.  Select the desired cooking function and the temperature using the control knobs.

2. Press “MODE” until you see “dur” symbol on the display screen. The symbol “A” will flash.
   

3. Select the desired cooking time period using the “+” and “-” keys.
   

4. The current time will reappear on the screen, and the symbols “A”, and “ ” will remain illuminated.
   

When the timer reaches zero, the oven will switch off and an audible warning will sound. The symbols “A” will flash. Turn both control knobs to the “0” position and press any key on the timer to stop the warning sound. Press “MODE” for 2 seconds the “A” symbol will disappear and the timer will switch back to manual function. Semi-automatic time adjustment (finishing time) This function automatically starts the oven so that cooking will finish at a set time. You can set an end time of up to 10 hours after the current time of day. Prepare the food for cooking and put it in the oven.

1. Select the desired cooking function and the temperature using the control knobs.

2. Press “MODE” until you see the “end” symbol on the display screen. “A” and the current time of day will flash.
   

3. Use the “+” and “-” buttons to set the desired finishing time.
   

4. The current time will reappear on the screen, the symbols “A” and “ ” will remain illuminated.
   

When the timer reaches zero, the oven will switch off and an audible warning will sound. The symbol “A” will flash. Turn both control knobs to the “0” position and press any key on the timer to stop the sound. Press “MODE” for 2 seconds the “A” symbol will disappear and the timer will switch back to manual function.

Full-automatic programming
This function is used to start cooking after a certain period of time and for a certain duration. A time of up to 23 hours and 59 minutes after the current time of day can be set. Prepare the food for cooking and put it in the oven.

1. Select the desired cooking function and the temperature using the control knobs.

2. Press “MODE” until you see the “dur” symbol on the screen. The symbol “A” will flash.
   

3. Select the desired cooking time period using the “+” and “-” keys.
   

4. Press “MODE” until you see the “end” symbol on the screen. The time and the symbols “A” will flash.
   

5.  Select the desired finishing time using the “+” and “-” keys. “ ” the symbol will disappear. Add the cooking period to the current time of day. You can set a time of up to 23 hours and 59 minutes after this.
   

6. The current time will reappear on the screen, and the symbols “A”, and will remain illuminated.
   

The operating time will be calculated and the oven will automatically start “ ” symbol will reappear on the screen so that cooking will finish at the set finishing time. When the timer reaches zero, the oven will switch off, an audible warning will sound and the symbols “A” will flash. Turn both control knobs to the “0” position and press any key to stop the sound. The symbol will disappear and the timer will switch back to manual function. Press “MODE” for 2 seconds the “A” symbol will disappear and the timer will switch back to manual function.

Sound Adjustment
To adjust the volume of the audible warning sound, while the current time of day is displayed, press the “+” and “-” keys and the dot in the middle of the screen will start to flash. Press “MODE” to display the current signal sound. After this, each time the “-” button is pressed, a different signal will sound. There are three different types of signal sounds. Select the desired sound and do not press any other buttons. After a short time, the selected sound will be saved.

Cooking Table

Function| Dishes| | |
---|---|---|---|---
Static| Puff Pastry| 1 – 2| 170-190| 35-45
Cake| 1 – 2| 170-190| 30-40
Cookie| 1 – 2| 170-190| 30-40
Stew| 2| 175-200| 40-50
Chicken| 1 – 2| 200| 45-60
Fan| Puff Pastry| 1 – 2| 170-190| 25-35
Cake| 1 – 2 – 3| 150-170| 25-35
Cookie| 1 – 2 – 3| 150-170| 25-35
Stew| 2| 175-200| 40-50
Chicken| 1 – 2| 200| 45-60
Turbo| Puff Pastry| 1 – 2 – 3| 170-190| 35-45
Cake| 1 – 2 – 3| 150-170| 30-40
Cookie| 1 – 2 – 3| 150-170| 25-35
Stew| 2| 175-200| 40-50
Two-tray cake| 1 – 4| 160-180| 30-40
Two-tray pastry| 1 – 4| 170-190| 35-45
Grilling| Grilled meatballs| 4| 200| 10-15
Chicken| *| 190| 50-60
Chop| 3 – 4| 200| 15-25
Beefsteak| 4| 200| 15-25

*If available cook with a roast chicken skewer.

 Accessories

The EasyFix Wire Rack
Clean the accessories thoroughly with warm water, detergent, and a soft clean cloth on first use.

• Insert the accessory to the correct position inside the oven.
• Allow at least a 1 cm space between the fan cover and accessories.
• Take care removing cookware and/or accessories out of the oven. Hot meals or accessories can cause burns.
• The accessories may deform with heat. Once they have cooled down, they will recover their original appearance and performance.
• Trays and wire grids can be positioned on any level from 1 to 5.
• Telescopic rails can be positioned on levels T1, T2, 3, 4, 5.
• Level 3 is recommended for single-level cooking.
• Level T2 is recommended for single-level cooking with telescopic rails.
• The turnspit wire grid must be positioned on Level 3.
• Level T2 is used for the turnspit wire grid positioning with telescopic rails.
  ****Accessories may vary depending on the model purchased.

The Wire Grid for Deep Trays
Make sure the wire grid is correctly placed within a deep tray. It is recommended to use this accessory for grilling steaks, meatballs, and similar food.

The Deep Tray
The deep tray is best used for cooking stews.
Put the tray into any rack and push it to the end to make sure it is placed correctly.

The Flap Drawer
Your appliance includes a drawer for storing accessories such as trays, shelves, grids, or small pots and pans.
WARNING: The inner surface of the drawer may become hot during use. Do not store any food, plastic or flammable materials in the drawer.

The Wire Grid

The wire grid is best used for grilling or for processing food in oven- friendly containers.

WARNING
Place the grid to any corresponding rack in the oven cavity correctly and push it to the end.

CLEANING AND MAINTENANCE

Cleaning

WARNING: Switch off the appliance
and allow it to cool before cleaning is
to be carried out.

General Instructions

• Check whether the cleaning materials are appropriate and recommended by the manufacturer before use on your appliance.
• Use cream cleaners or liquid cleaners which do not contain particles. Do not use caustic (corrosive) creams, abrasive cleaning powders, rough wire wool or hard tools as they may damage the cooker surfaces.

Do not use cleaners that contain particles, as they may scratch the glass, enameled, and/or painted parts of your appliance.

• Should any liquids overflow, clean them immediately to avoid parts becoming damaged.

Do not use steam cleaners for cleaning any part of the appliance.

Cleaning the Inside of the Oven

• The inside of enameled ovens is best cleaned while the oven is warm.
• Wipe the oven with a soft cloth soaked in soapy water after each use. Then, wipe the oven over again with a wet cloth and dry it.
• You may need to use a liquid cleaning material occasionally to completely clean the oven.

Catalytic Cleaning
Catalytic liners are installed within the oven cavity. These are the matte- finished, light-colored panels on the sides and/or the matte-finished panel at the rear of the oven. They work by collecting any grease and oil residue during cooking.

The liner self-cleans by absorbing fats and oils and burning them to ash, which can then be easily removed from the floor of the oven with a damp cloth. The lining must be porous to be effective. The liner may discolor with age.

If a large amount of fat is spilled onto the liner, it may reduce its efficiency. To overcome this problem, set the oven to maximum temperature for about 20 – 30 minutes. After the oven has cooled, wipe out the floor of the oven.

Manual cleaning of the catalytic liners is not recommended. Damage will occur if a soap impregnated steel wool pad or any other abrasives are used. In addition, we do not recommend the use of aerosol cleaners on the liners. The walls of a catalytic liner may become ineffective due to excess grease. The excess grease can be removed with a soft cloth or sponge soaked in hot water, and the cleaning cycle can be carried out as described above.

Removal of Catalytic Liner
To remove the catalytic liner, remove the screws holding each catalytic panel to the oven.

Cleaning the Ceramic Glass

Ceramic glass can hold heavy utensils but may be broken if it is hit with a sharp object.

WARNING: Ceramic Cooktops – if the surface is cracked, to avoid the possibility of an electric shock, switch off the appliance and call for service.

• Use a cream or liquid cleaner to clean the vitroceramic glass. Then, rinse and dry the glass thoroughly with a dry cloth.
  Do not use cleaning materials meant for steel as they may damage the glass.

• If substances with a low melting point are used in the cookware’s base or coatings, they can damage the glass-ceramic cooktop. If plastic, tin foil, sugar, or sugary foods have fallen on the hot glass-ceramic cooktop, please scrape it off the hot surface as quickly and as safely as possible. If these substances melt, they can damage the glass-ceramic cooktop. When you cook very sugary items like jam, apply a layer of a suitable protective agent beforehand if it is possible.

• Dust on the surface must be cleaned with a wet cloth.

• Any changes in color to the ceramic glass will not affect the structure or durability of the ceramic and is not due to a change in the material.

Color changes to the ceramic glass may be for a number of reasons:

1. Spilled food has not been cleaned off the surface.
2.  Using incorrect dishes on the hob will erode the surface.
3. Using the wrong cleaning materials.

Cleaning the Glass Parts

• Clean the glass parts of your appliance on a regular basis.
• Use a glass cleaner to clean the inside and outside of the glass parts. Then, rinse and dry them thoroughly with a dry cloth.

Cleaning the Enamelled Parts

• Clean the enameled parts of your appliance on a regular basis.
• Wipe the enameled parts with a soft cloth soaked in soapy water. Then, wipe them over again with a wet cloth and dry them.

Do not clean the enameled parts while they are still hot from cooking.
Do not leave vinegar, coffee, milk, salt, water, lemon, or tomato juice on the enamel for a long time.

Cleaning the Stainless Steel Parts (if available)

• Clean the stainless steel parts of your appliance on a regular basis.
• Wipe the stainless steel parts with a soft cloth soaked in only water. Then, dry them thoroughly with a dry cloth.

Do not clean the stainless steel parts while they are still hot from cooking.

Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a long time.

Cleaning Painted Surfaces (if available)

• Spots of tomato, tomato paste, ketchup, lemon, oil derivatives, milk, sugary foods, sugary drinks, and coffee should be cleaned with a cloth dipped in warm water immediately. If these stains are not cleaned and allowed to dry on the surfaces they are on, they should NOT be rubbed with hard objects (pointed objects, steel, and plastic scouring wires, surface-damaging dish sponge) or cleaning agents containing high levels of alcohol, stain removers, degreasers, surface abrasive chemicals. Otherwise,
  corrosion may occur on the powder-painted surfaces, and stains may occur. The manufacturer will not be held responsible for any damage caused by the use of inappropriate cleaning products or methods.

Removal of the Inner Glass

You must remove the oven door glass before cleaning, as shown below.

1. Push the glass in the direction of B and release it from the location bracket (x). Pull the glass out in the direction of A.
   

To replace the inner glass:

1. Push the glass towards and under the location bracket (y), in the direction of B.
   

2. Place the glass under the location bracket (x) in the direction of C.
   

If the oven door is a triple glass oven door, the third glass layer can be removed the same way as the second glass layer.

Removal of the Oven Door
Before cleaning the oven door glass, you must remove the oven door, as shown below.

1. Open the oven door.
   

2. Open the locking catch (a) (with the aid of a screwdriver) up to the end position.
   

3. Close the door until it almost reaches the fully closed position and removes the door by pulling it towards you.
   

Removal of the Wire Shelf
To remove the wire rack, pull the wire rack as shown in the figure. After releasing it from the clips (a), lift it up.

Maintenance

WARNING: The maintenance of this appliance should be carried out by an authorized service person or qualified technician only.

Changing the Oven Lamp

WARNING: Switch off the appliance and allow it to cool before cleaning your appliance.

• Remove the glass lens, then remove the bulb.
• Insert the new bulb (resistant to 300 °C) to replace the bulb that you removed (230 V, 15-25 Watt, Type E14).
• Replace the glass lens, and your oven is ready for use.

The lamp is designed specifically for use in household cooking appliances. It is not suitable for household room illumination.

TROUBLESHOOTING & TRANSPORT

 Troubleshooting

If you still have a problem with your appliance after checking these basic troubleshooting steps, please contact an authorized service person or qualified technician.

Check the household fuse for the appliance. Check whether there is a power cut by trying other electronic appliances.

The oven does not switch on.| The power is switched off.| Check whether there is power supplied. Also, check that other kitchen appliances are working.
No heat or oven does not warm up.| Oven temperature control is incorrectly set.

Oven door has been left open.

| Check the oven temperature control knob is set correctly.
Cooking is uneven within the oven.| Oven shelves are incorrectly positioned.|

Check that the recommended temperatures and shelf positions are being used.

Do not frequently open the door unless you are cooking things that need to be turned. If you open the door often, the interior temperature will be lower and this may affect the results of your cooking.

Oven light (if available) does not operate.| The lamp has failed.

The electrical supply is disconnected or switched off.

| Replace the lamp according to the instructions.

Make sure the electrical supply is switched on at the wall socket outlet.

The timer buttons cannot be pressed properly.| There is foreign matter caught between the timer bu buttons.

Touch model: there is moisture on the control panel. The key lock function is set.

| Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is set.
The oven fan (if available) is noisy.| Oven shelves are vibrating.| Check that the oven is level.

Check that the shelves and any bakeware are not vibrating or in contact with the oven back panel.

Transport

If you need to transport the product, use the original product packaging and carry it using its original case. Follow the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product during transport.

If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external surfaces of the product is protected against external threats.

52326965

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>