BAUHN ARTTS-0822-W Retro Turntable with Speakers User Manual
- June 4, 2024
- BAUHN
Table of Contents
ARTTS-0822-W Retro Turntable with Speakers
User Manual
MODEL: ARTTS-0822-W, ARTTS-0822-B
Welcome
Congratulations on your purchase!
This manual tells you all you need to know about using your new BAUHN ®
product.
Please take special note of any important safety and usage information
presented with the symbol.
All products brought to you by BAUHN ® are manufactured to the highest
standards of performance and safety and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 1 Year Warranty.
Domestic use only: This product is intended for indoor domestic use only. It
is not suitable for commercial, industrial or outdoor use. Do not use this
product for anything other than its intended purpose, and only use it as
described in this manual.
We hope you will enjoy using your purchase for many years to come.
Unpack And Prepare
What’s in the Box
Before setting up your new turntable, check you have everything:
A. Turntable
B. Speakers (2)
C. AC Adaptor| D. Warranty Certificate
E. User Manual
F. General Safety Warnings
---|---
Important Tips
- Place the turntable on a level surface.
- Place the turntable away from any source that may generate heat or vibrations.
- Make sure there is enough space around the turntable for airflow. Leave at least 10cm clearance around the product.
- Unplug the turntable before cleaning it.
- Clean using a dry cloth only – do not use water or chemicals.
- Only use the provided power supply.
- Keep liquid, children, and pets away from the turntable at all times.
- Repack in its original packaging when transporting the turntable.
Before First Use
-
Unpack the product but keep all packaging materials until you have made sure your new product is undamaged and in good working order.
Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach. -
Unwind the cord to its full length and inspect it for damage. Do not use the product if the product or its cord has been damaged or is not working properly. In case of damage, contact our after-sales support line for advice on examination or repair, or return of the damaged product.
-
Read this manual to familiarise yourself with all the parts and operating principles of the product.
-
Do not connect the product to the mains power socket before checking the mains voltage and before all other connections have been made.
Connect to Power
**** Make sure the turntable is switched off at the power outlet until you have finished connecting your cables.
- Connect the DC plug to the DC port of the turntable.
- Plug the adaptor into the AC power outlet.
- Connect to the provided speakers by inserting the red plug into the R socket and the white plug into the L socket.
Controls and Connections
Product Overview
1. Turntable| 7. Adaptor (when playing
45rpm records)
---|---
2. Power/Volume knob| 8. AUX IN
3. Cartridge| 9. Speaker jack
4. Speed adjustment: 33, 45, 78rpm| 10. DC power jack
5. Auto stop control| 11. Transparent cover
6. Tonearm| 12. Speakers
Operation
Power On and Mode selection
- Turn on (with the POWER/VOLUME Knob) and you will hear a doorbell sound, meaning that it is in Bluetooth ® mode.
- Once you place the tone arm on the vinyl, the turntable will switch to vinyl mode and Bluetooth ® mode will automatically be disabled; Place the tone arm back on the armrest to switch back to Bluetooth ® mode.
Playing a Record
- Turn on (with the POWER/VOLUME KNOB) and adjust the volume to an appropriate level.
- Place a record on the turntable platter and select the correct playing speed: 33, 45, 78 RPM (according to the vinyl being played).
- Set the auto/manual stop control. Set the AUTO STOP switch to ON if you are playing a 33 RPM record and you want the turntable to stop turning when it has reached the end of the record. If the switch is set to OFF, the turntable will continue turning at the end of the record.
- Remove the stylus guard and unlock the tone arm lock. Push the lift lever upward to raise the tonearm and then gently move the tonearm to the desired position over the record. The platter will begin to spin when the tone arm is moved toward the record.
- Push the lift lever forward to lower the tone arm slowly onto the desired position on the record and begin playing the record.
- When you have finished playing the record, push the lift lever backward to raise the tone arm and gently move it back to its rest.
- When you have finished playing records, engage the tone arm lock to protect it from accidental movement. Turn the POWER KNOB to switch the unit OFF. Unplug it from the power supply if you are not going to use it for a while.
- NOTE: If your record stops before the last track finishes, set the AUTO STOP switch to OFF. Your record will now play to the end, but you will have to stop the turntable rotation manually.
- NOTE: Depending on the record length, AUTO STOP may be enabled before the end of the recording. Do not rely on AUTO STOP alone to turn off playback.
To avoid damaging the stylus, ensure that the included stylus guard is in place whenever the turntable is being installed, moved, or cleaned.
Playing Music from an Auxiliary Input
- Turn on (with the POWER/VOLUME KNOB) and adjust the volume to an appropriate level.
- Using a 3.5mm Stereo cable, connect the external audio device to the AUX IN socket at the back of the unit.
- Turn ON (with the POWER/VOLUME KNOB) and adjust the volume to an appropriate level.
- Use the POWER/VOLUME KNOB to adjust the volume or use the controls on the external audio device to control the Playback/Volume functions.
Tips for Better Performance
- When opening or closing the turntable cover, handle it gently, moving it either at the center or equally from both sides.
- Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable mat or on the edge of the record.
- Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.
- If you use a stylus cleaning fluid, use it very sparingly.
- Wipe the dust cover and turntable housing gently with a soft cloth. Clean the unit only with a dry, clean cloth. Do not use liquid or aerosol cleaners.
- Never apply harsh chemicals or solvents to any part of the turntable system.
- Prior to moving the turntable, always unplug it from the AC power outlet and fasten the tone arm on the tone armrest with the vinyl twist-tie.
Replacing the Stylus
|
---|---
Push the arm lock to release the tone arm.| Take off the cap of the cartridge
to expose the needle.
|
Separate the cartridge from the cartridge holder by loosening the locker.|
Make sure the audio lines are not touching each other.
|
Carefully insert the audio line connector into the new cartridge.| Gently pull
the audio lines from the cartridge, pull from the terminal
connector, and not the wire itself.
|
Carefully slide the cartridge into the cartridge holder.| Gently clip the
cartridge into the cartridge holder.
Bluetooth ®
You can listen to tracks from a media device if connected to the unit via
Bluetooth ® wireless technology.
Pairing Bluetooth ® Devices
When the turntable is switched on and the tonearm is placed on the armrest,
Bluetooth ® mode is automatically activated.
The first time you use your Bluetooth ® device with the turntable, you will
need to pair them with one another.
Activate Bluetooth on your compatible device, and set it to search for
compatible devices.
Select the speaker name: ‘BAUHN ARTTS-0822’ from the list of found devices.
If your device asks for a passkey (depending on the device manufacturer,
model, and software version), then enter digits “0000” and press OK.
The operational range between this turntable and a Bluetooth ® device is
approximately 10 meters (without any object between the Bluetooth-enabled
device and the unit). Any obstacle between the devices can reduce the
operational range.
Before you connect a Bluetooth ® enabled device to this unit, ensure you know
the device’s capabilities.
Compatibility with all Bluetooth devices is not guaranteed.
If the signal strength is weak, your Bluetooth ® receiver may disconnect, but
it will re-enter pairing mode automatically.
If a mobile phone on which you are playing music receives a call, the music
will be interrupted. The phone call audio however is not played via the
speakers. Once you end the call, the devices are connected to each other again
and playback resumes.
Your device will also be disconnected when your device is moved beyond the
operational range. If you want to reconnect your device, place it within the
operational range.
If the connection is lost, follow the instructions (left) to pair your device
to the player again.
Troubleshooting
If you have problems with the turntable, check below for advice. If you don’t find a solution here, contact After Sales Support on 1300 002 534.
Problem | Solution |
---|---|
No power | • Ensure that the AC adaptor is properly connected. |
• Ensure that there is power at the AC outlet.
No sound| • Rotate the volume knob clockwise to increase the volume.
• Check that the speakers are connected correctly.
• Check that there is no cable plugged into the AUX IN port.
The vinyl record will
not play| • Make sure you have selected the correct speed (33, 45, 78rpm).
Nothing will play via AUX IN
connection| • Make sure the cable is firmly connected and check that your
external device is clean and not damaged.
Make sure the volume of the external device is turned up.
Specifications
Power Input | DC 12V 2A; (AC Adaptor: AC 100-240V) |
---|---|
Power Consumption | 24W Max. |
Dimensions (Turntable) | 360mm x 300mm x 100mm (w x d x h) |
32cm turntable clearance height
Dimensions (Speaker)| 130mm x 120mm x 200mm
Vinyl Records| Speed| Supports playback speed
33/45/78
Record size support| 7″ = 17.7cm
10″ = 25.5cm SP
12″ = 30cm LP
Speaker| 2 x 10W
Unit Mass| 4.5kg
For Technical and Warranty Support
1300 002 534
tempo.org/support
Distributed by Tempo (Aust) Pty Ltd,
PO Box 132, Frenchs Forest NSW 1640
Compliance and Responsible Disposal
Packaging
The packaging of your product has been selected from environmentally friendly
materials and can usually be recycled. Please ensure these are disposed of
correctly. Plastic wrapping can be a suffocation hazard for babies and young
children, please ensure all packaging materials are out of reach and are
safely disposed of. Please recycle these materials rather than throw them
away.
Product
At the end of its working life, do not throw this product out with your
household rubbish. An environmentally friendly method of disposal will ensure
that valuable raw materials can be recycled. Electrical and electronic items
contain materials and substances which, if handled or disposed of incorrectly,
could potentially be hazardous to the environment and human health.
Compliance
This product complies with the Australian Safety Standard AS/NZS 62368.1 to
ensure its safety of the product.
Bluetooth ® The Bluetooth ® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings
Pty Ltd is under license. Other trademarks and trade names are those of their
respective owners.
Warranty Information
The product is guaranteed to be free from defects in workmanship and parts for
a period of 12 months from the date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced or
refunded at our discretion, solely at our option with no charge for parts and
labour. The benefits conferred by this warranty are in addition to all rights
and remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and to compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Repair and Refurbished Goods or Parts Notice
Unfortunately, sometimes faulty products are manufactured, which need to be
returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated
data (such as files stored on a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable media player, games saved on
a games console or files stored on a USB memory stick) during the process of
repair, some or all of your stored data may be lost. We recommend you save
this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them
with refurbished goods of the same type or use refurbished parts in the repair
process.
Please be assured though, that refurbished parts or replacements are only used
where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1300 002 534 or write to us
at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 132, Frenchs Forest, NSW 1640, Australia
Telephone: 1300 002 534 (Aust) Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm AEST)
Email: tempo.org/support
Notes
Online support
Visit bauhn.com.au for software updates to keep your product up-to-date, as
well as the latest User Manual for information on the updated features.
The product does not work?
If you encounter problems with this product, or if it fails to perform to your
expectations, please contact ours After Sales Support Centre on 1300 002 534.
ALDI guarantees that our products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of our after-sales support by calling the supplier’s Customer Service Hotline.
AFTER-SALES SUPPORT
1300 002 534
tempo.org/support
MODEL: ARTTS-0822-B, ARTTS-0822-W
PRODUCT CODE: 709172
Documents / Resources
|
BAUHN ARTTS-0822-W Retro Turntable with
Speakers
[pdf] User Manual
ARTTS-0822-W, ARTTS-0822-B, Retro Turntable with Speakers, Retro Turntable,
Turntable with Speakers, ARTTS-0822-W, Turntable
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>