BAUHN APMP-1222 Karaoke Microphone User Guide
- June 3, 2024
- BAUHN
Table of Contents
BAUHN APMP-1222 Karaoke Microphone User Guide
Product Overview
A. Microphone
B. Power Button
C. Echo
D. Music Volume
E. Microphone Volume
F. Bass
G.Treble
H. LED Lights
I. Mode (TF Card/Bluetooth®)
J. Turn LED Lights On/Off
K. Previous Track
L. Play/Pause
M. Next Track
N. Micro USB Input (for charging unit)
O. Micro SD Card (TF Card)
Power On
Press the power button for 2 seconds to turn the microphone on/off. When on, a blue LED light will be lit. (Press the LED light on/off button to turn the lights on/off).
Bluetooth® Connection
Open the Bluetooth® menu on your device (e.g. phone/tablet) and scan the
Bluetooth® devices. Select ‘APMP-1222’ to connect. There will be a
notification voice once successfully connected. While singing, operations such
as Play/Pause, Last Song/Next Song can be done on your device and/or on the
microphone.
NOTES:
Once the microphone has been connected to your device for the first time, it
will connect automatically the following times. There is no need to pair
again. If you receive a phone call during use, you can use the Play/Pause
button to switch to the phone call mode. You can then talk via the microphone.
If you just want to listen to music via the microphone without singing, you
can simply set the voice volume to the minimum setting. If a Micro SD (TF)
card is inserted, the microphone will switch to Micro SD (TF) card mode
automatically; press the M button to switch to Bluetooth® mode.
Playing music via Micro SD
Insert a Micro SD (TF) card into the Micro SD (TF) port. The microphone will
detect all of the .mp3 files and start playing them automatically. You can
press the operation buttons to pause or switch songs. When playing songs via
the Micro SD (TF) Card, you can control the voice volume by adjusting the
music volume.
NOTE: The microphone supports up to 32GB Micro SD card or TF card. Please
make sure the card is formated as FAT32 format.
Charging
When battery is too low, the microphone will turn off automatically. Use the included Micro USB cable to charge. The red light will be lit during charging. Charging time is approximately 2-3 hours; the red light will be off when the microphone is fully charged.
Specifications
Bluetooth® Yes
- Battery capacity 3.7V 1200mAh
- Operation time Up to 5 hours
- Power input DC 5V, 1A
- Size 75 x 74 x 262mm
- Weight 440g
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.
Troubleshooting
No power
Insert the supplied charging cable securely into the power output and
ensure the power outlet is switched on.
No audio
Turn the microphone on and adjust the voice volume.
No reverb effect
Adjust the echo button to the appropriate setting.
Noise when singing
Move to a quieter location and ensure the mobile phone is close to the
microphone during use.
Music keeps dropping out
Move the microphone closer to the mobile phone.
Music is too quiet or not playing at all
Adjust the volume on your phone.
Failed to connect to Bluetooth
- Place the phone and microphone closer together.
- Check the Bluetooth® menu on your phone to ensure it is connected to the correct Bluetooth® device.
- Turn the microphone off then on to restart. On your device, turn Bluetooth® off then back on, and search again.
Give us a call
What? You mean this User Guide didn’t have ALL the answers? Speak to us! We’d love to help you get up and running as quickly as possible. Call our After Sales Support on 1300 002 534. Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>