datamax AT001 2D Wireless Barcode Scanner User Guide
- June 4, 2024
- datamax
Table of Contents
2D Wireless
Barcode Scanner
2.4G+Wire
2.4G+Bluetooth+Wire
User’s Guide
AT001 2D Wireless Barcode Scanner
Wireless pairing settings (2.4G mode)
|
---|---
%%SpecCodeA8| %%SpecCode99
Scan the above two setting codes one by one, Then the green light on the back of the scanner will flash continuously, you need to re-plug the receiver, the green light is off, and the green light is always on.
|
---|---
%%SpecCodeAA| %%SpecCode99
Wireless pairing settings (Bluetooth mode)
- Scan the above two setting codes or Press and hold the scanner button for about 8 seconds. After hearing the sound of the scanner, release the button, the blue indicator light on the back of the scanner flashes continuously, and the scanner enters the Bluetooth search mode.
- Open the mobile phone, ipad, and other terminal devices Bluetooth, search for Bluetooth, and pair (the Bluetooth name is: BarCoed Scanner HID), after the connection is successful, the scanner will sound once, and the blue indicator light is always on, the connection is successful.
Working Mode setting:
|
---|---
|
Scan Mode Setting
|
---|---
|
|
|
Standby Setup
|
---|---
|
|
|
TYPE:| 2.4G| Bluetooth
---|---|---
Distance:| 30m-80m| 10m-20m
Memory:| 2MB| Printing Contract:?-25%
Working current: 180mA| Standby current: 30mA
Working time : 3 to 7days| Charging power: 5V-400mA
Scanner parameters:
Sensor : 640’480 CMOS| Indication: Buzzer & LED
Trigger Mode: Auto-Sense
2.50
LuxDepth
of Field| 13mil-EAN13| 50-250mm| Resolution: 4mil CPU: ARM 32-bit Printing
Contract : >25%
Decoding speed: 500/sec
4mikode39| 60-100mm
20mil-QR| 40-300mm
10mil-PDF417| 40-280mm
Scanning {HYPERLINK “app:ds:angle”): Angle of rotation360°, indignation 65°,
declination ± 60°
Anti-interference : 0-100000Lux Max
Decode Capability :
to: MCA , UPC{, FANS, EAN•13 , Code 128, Code 39 , Code 93 , Code II , Interkeved 2 of S , Mat & 2 of S, Standard 2 of S , Coda bar, MSt Okssey, BSS, etc_ 20:0J1Code, Data Matru , DOM) , Aztec code ,
Button life : 500,000 times| LED life:100000 hours
Drop test: 1.5m| Interface: USB, USB-COM, USB-HID
QUALIFIED CERTIFICATE
Guarantee ltem:
- 3months upon the date of purchase.if there was a function problem. we would offer the same item subject to goods and packing maintain perfect.
- 1year upon the date of purchase, we will guarantee to keep the goods in repair. (not including fittings)
- Guarantee service is subject to normaily using.
- All of the damage by man-made(tear open the housing, tear off the sticker, run normally using), of losing this card, we will not guarantee.
General Settings:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>