EZAIoT 723 IPS Wired Smart Thermostat Instruction Manual
- June 16, 2024
- EZAIoT
Table of Contents
723 IPS Wired Smart Thermostat
Instruction Manual
723 IPS Wired Smart Thermostat
Model:
EZ-# .723 Wiring Diagram
How it works:
When the thermostat detects that the room temperature is lower than the
target temperature, it transmits a signal to the wall-hung boiler to start the
underfloor heating system for heating. When the wall-hung boiler receives the
signal, it turns on the heating and outputs hot water. The thermostat
controls the temperature of the room by controlling the opening degree of the
electric valve of the water pipe. When the room reaches the target
temperature, the thermostat sends a signal to the wall-hung boiler to stop
heating.
Note: The thermostat only controls the room temperature, not the heating
of domestic water.
CAUTION:
Do not connect the live wire directly to the PC1 /PC2 terminals, or there
will be a risk of short circuit.
- Wiring for AC1 00-240V Based Boiler
- Wiring for Combi-boiler (Dry-contact)
- Wiring Electric Actuator
Documents / Resources
|
EZAIoT 723 IPS Wired Smart
Thermostat
[pdf] Instruction Manual
723 IPS Wired Smart Thermostat, 723, IPS Wired Smart Thermostat, Wired Smart
Thermostat, Smart Thermostat, Thermostat
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>