V I V O MOUNT-KB05HB-DR Clamp On Height Adjustable Keyboard Tray with Drawer Instruction Manual
- August 19, 2024
- V I V O
Table of Contents
V I V O MOUNT-KB05HB-DR Clamp On Height Adjustable Keyboard Tray with
Drawer
Specifications
- Product Name: Clamp-on Height Adjustable Keyboard Tray with Drawer
- SKU: MOUNT-KB05HB-DR
- Weight Capacity: 11lbs (5kg)
Product Usage Instructions
- Assemble Slider Brackets (B) to the Support Brackets (D) using M4x7mm Screws (S-A). Ensure countersunk holes on Support Brackets (D) face outward.
- Attach Slider Brackets (B) to the underside of Keyboard Tray (A) using M5x12mm Round Head Screws (S-B). Attach Keyboard Tray Stop (F) using M5x12mm Flat Head Screws (S-D).
- Attach Clamps (C) to Support Brackets (D) at the desired height using M5x8mm Screws (S-C).
- Place the assembled keyboard mount on the edge of the desk, then slide Pads (E) on the underside of each Clamp (C). Tighten clamps to secure to desktop. Ensure the keyboard tray is level and adjust the position as needed.
Note: Do not over-tighten clamps to ensure the keyboard tray is level and slides smoothly.
FAQ
- Q: What is the weight capacity of the keyboard tray?
- A: The weight capacity of the keyboard tray is 11lbs (5kg). Ensure not to exceed this limit to prevent any damage or injury.
- Q: Can the clamps be adjusted for different desktop thicknesses?
- A: Yes, the clamps are pre-assembled for desktops 0-65mm thick. Additional height settings can be achieved by adjusting the position of the upper clamp using the 4mm Allen Wrench provided.
SKU: MOUNT-KB05HB-DR
- Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
- Instruction Manual https://vivo-us.com/products/mount-kb05hb-dr
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CST
- help@vivo-us.com
- www.vivo-us.com
- 309-278-5303
- Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
- DO NOT EXCEED WEIGHT CAPACITY.
- Failure to do so may result in serious injury.
ASSEMBLY INSTRUCTIONS
ASSEMBLY STEPS
STEP 1
- Assemble Slider Brackets (B) to the Support Brackets (D) using M4x7mm Screws (S-A), making sure the countersunk holes on Support Brackets (D) are facing outward, as shown below. Tighten with a Phillips screwdriver.
NOTE: Countersunk holes should be facing outward.
OTHER ASSEMBLY OPTIONS
Increased Tray Extension
- The clamp can be offset using the extra holes in Slider Brackets (B) to allow the tray to be pulled out an extra 1.2” (30mm) when in use. If mounted this way the tray will sit further out from the desk edge.
Compact Desk Setups
- For increased leg room under the keyboard tray, the desk clamps can be installed directly to the Slider Brackets (B) without use of Support Brackets (D).
- Secure Clamps (C) to the side of Slider Brackets (B) using M4x7mm Screws (S-A) with Phillips screwdriver. Ensure countersunk holes are facing outward.
STEP 2
Assemble Slider Brackets (B) to the underside of Keyboard Tray (A) using
M5x12mm Round Head Screws (S-B), and tighten with a Phillips screwdriver.
Assemble Keyboard Tray Stop (F) to Keyboard Tray (A) using M5x12mm Flat Head
Screws (S-D), and tighten with a Phillips screwdriver. Slider Brackets should
extend past the back end of the Keyboard Tray.
STEP 3
Assemble Clamps (C) to Support Brackets (D) at the desired height using M5x8mm
Screws (S-C). Tighten with a Phillips screwdriver.
Adjusting Clamp for Greater Desktop Thickness
-
Clamps are pre-assembled for compatibility with desktops 0-65mm (2.56”) thick. The clamp features two additional height settings if the pre-assembled clamp does not work with your desktop.
-
Remove the preinstalled screws using 4mm Allen Wrench (T-A) and adjust the position of the upper clamp according to your desktop thickness.
-
0-45mm (1.77”) Desktop Thickness: Use upper hole set.
-
5-85mm (0.197” – 3.35”) Desktop Thickness: Use lower hole set.
STEP 4
- Place the assembled keyboard mount on the edge of the desk, then slide Pads (E) on the underside of each Clamp (C). Tighten clamps to secure to the desktop
NOTE: To ensure the keyboard tray is level, do not over-tighten clamps. Slide the keyboard tray forward/back to the desired position.
- The keyboard tray is now ready for use.
THIS PAGE INTENTIONALLY LEFT BLANK
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
CONTACT
- Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can offer immediate assistance with rapid response times.
- If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
- FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Black Clamp-on Height Adjustable Keyboard Tray with Drawer – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>