V I V O STAND-V001VA Single Monitor Desk Mount with VESA Adapter Bracket Instruction Manual

: October 30, 2023
: V I V O

Table of Contents

STAND-V001VA Single Monitor Desk Mount with VESA Adapter Bracket
PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Single Monitor Desk Mount with
VESA Adapter Bracket
Instruction Manual

STAND-V001VA Single Monitor Desk Mount with VESA Adapter Bracket

SKU: STAND-V001VA

https://vivo-us.com/products/stand-v001va

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

V I V O STAND V001VA Single Monitor Desk Mount with VESA Adapter Bracket -
PACKAGE CONTENTS NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
Alternative mounting hardware (if Bracket Arms are not used)

| |
---|---|---
M-A (x4)
M4x12mm
Thumbscrews| M-B (x4)
M4x30mm
Screws| M-C (x4)
Spacers

TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1
Loosen knob on Clamp (B). V I V O STAND V001VA Single Monitor Desk Mount with
VESA Adapter Bracket - knob on Clamp STEP 2 (Option A)
Desk Clamp Installation
Mount Clamp (B) to Pole (A) using M6x16mm Screws (S-A) 3mm Allen Wrench (T-A). Secure assembly to desktop by tightening knob on Clamp (B). V I V O STAND
V001VA Single Monitor Desk Mount with VESA Adapter Bracket - Desk
Clamp STEP 2 (Option B)
Grommet Installation
Using a phillips screwdriver, remove the screw from Clamp (B) and disassemble. Set Knob (B2) aside. V I V O STAND V001VA Single Monitor Desk Mount with
VESA Adapter Bracket - Grommet Installation Mount Grommet Plate (F) to Pole (A) using M6x16mm Screws (S-A) and 3mm Allen Wrench (T-A).
Remove adhesive backing from Soft Pad (G) and adhere to Grommet Plate (F). V
I V O STAND V001VA Single Monitor Desk Mount with VESA Adapter Bracket - Soft
Pad If desk does not have an existing grommet hole, drill a 3/8” (10mm) diameter hole at the desired position through the mounting surface. V I V O STAND V001VA Single
Monitor Desk Mount with VESA Adapter Bracket - mounting
surface Position Pole (A) on the mounting surface and secure using Knob (B2) and Support Plate (H). V I V O STAND V001VA Single Monitor Desk Mount
with VESA Adapter Bracket - Support Plate STEP 3
Slide Pole Cable Clip (J) and Swivel Arm (C) onto Pole (A). Tighten Swivel Arm (C) at desired height using 6mm Allen Wrench (T-C). Insert Pole Cap (E) into top of Pole (A). Attach arm Cable Clips (I) onto Swivel Arm (C). V I V O
STAND V001VA Single Monitor Desk Mount with VESA Adapter Bracket - Pole Cable
Clip STEP 4
Attach “L” Support Holders (L) to Bracket Arms (K) using appropriate M6 Screws (S-B, S-C, or S-D) for monitor thickness and a Phillips screwdriver.
Do not tighten fully. STEP 5
Connect VESA Plate (D) to assembled arms using Carriage Bolts (S-G), Nuts (S-F), Wrench (T-D) and a Phillips screwdriver. Arms can be assembled in one of four methods, which are shown below and on next page. V I V O STAND
V001VA Single Monitor Desk Mount with VESA Adapter Bracket - VESA
Plate V I V O
STAND V001VA Single Monitor Desk Mount with VESA Adapter Bracket - VESA Plate
2 STEP 6
With all “L” Support Holders (L) facing up, place monitor on lower two holders and fully tighten lower two screws with a Phillips screwdriver. Turn top holders down and tighten top screws, then tighten nuts for the upper arms. Install Plastic Covers (M) into “L” Support Holders (L). V I V O STAND V001VA
Single Monitor Desk Mount with VESA Adapter Bracket - Phillips
screwdriver STEP 7
Slide monitor assembly onto Swivel Arm (C) and secure with M6 Security Screw (S-E). V I V O STAND V001VA Single Monitor Desk Mount with VESA Adapter
Bracket - Slide monitor STEP 8
Route cables through Arm Cable Clips (I) and Pole Cable Clip (J). Use 5mm Allen Wrench (T-B) to adjust tilt and swivel on VESA plate head. CAUTION:
To avoid risk of monitors sliding off,
DO NOT rotate monitors beyond +5° or -5°.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 01/16/2023
REV1.2
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
---|---|---
| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com