V I V O DESK-V000K Series Desk Riser Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O DESK-V000K Series Desk Riser Instruction Manual
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING
PINCH POINT DO NOT place hands on or near support bars. Moving parts can crush
and Failure to follow these instructions may result in serious personal
injury.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury
ASSEMBLY STEPS
STEP 1
Apply Pads (D) to underside of Keyboard Tray (B). Assemble Stopper (C) to
Kayboard Tray (B) using ST4.2x12mm Screws (S-A) and a Phillips screwdriver.
STEP 2
Install Rubber Feet (E) to the bottom of Desk (A). Remove shipping tie from
desk and set right side up on solid surface. NOTE: DO NOT squeeze the handle
on Desk (A) while cutting the shipping tie.
STEP 3
Raise Desk (A) by lifting the handle on the right side of the frame.
Place Keyboard Tray (B) on the metal brackets on Desk (A). Secure Keyboard
Tray (B) to brackets using M5x10mm Screws (S-B) and tighten with a Phillips
screwdriver.
STEP 4
Apply Cable Clips (F) to underside of Desk (A).
Desk riser is now ready for use
GROMMET MOUNT INSTALLATION
This desk riser features a pre-drilled grommet hole for installing a monitor mount directly to desk surface.
To utilize this feature, your will need to remove the plug from the top
surface of the riser. Secure your mount using a grommet mounting method, using
the hardware and assembly steps from your monitor mount.
CAUTION!
Keep monitor and laptop base fully on the desktop.
Follow the cable routing instructions to avoid the potential to pinch cables
Leave enough slack in cable to allow for full range of vertical motion (15” /
38 cm).
Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-v000k
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent!
AVG. Chat live with an agent! RESOLUTION TIME (within office hrs): < 15 M
[email protected]
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- K Series Standing Desk Converter – VIVO - desk solutions, screen mounting, and more