V I V O DESK-E151EB Black Compact Electric Single Motor Desk Frame Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
DESK-E151EB Black Compact
Electric Single Motor Desk Frame
Instruction Manual 
Black
Compact Electric Single Motor Desk Frame
Instruction Manua l
DESK-E151EB Black Compact Electric Single Motor Desk Frame
SKU: DESK-E151EB
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-e151eb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND
ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
- DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
- DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
- NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
- NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
- ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
- OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS
NEEDED
DO NOT EXCEED
WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Assemble Right Crossbar (D) to Motorized Leg (A), and Left Crossbar (C) to Leg
(B), using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B).
STEP 2
Attach one Side Bracket (G) to Leg (B) and Right Crossbar (D) using M6x11mm
Screws (S-A) and 5mm Allen Wrench (T-B), using the center and left screw holes
of Side Bracket.
Next, attach remaining Side Bracket (G) to Motorized Leg (A) and Left Crossbar
(C) using using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B), using the
center and right screw holes of Side Bracket.
STEP 3
Place Feet (F) on leg assemblies and secure using M6x11mm Screws (S-A) and 5mm
Allen Wrench (T-B). Connect leg assemblies by sliding Inner Crossbar (E) into
Left and Right Crossbars (C, D).
Secure Inner Crossbar (E) to Left and Right Crossbars (C, D) using
M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B). Place Sync Rod
STEP 4
Flip assembly over. Loosen the knob on the Sync Rod (H) and extend the hex
shaft. Insert hex shaft into Leg (B), making sure the metal retaining ring
makes contact with the Leg (B). While holding the hex shaft with one hand,
extend Sync Rod (H) onto the spline shaft of Motorized Leg (A). Tighten Sync
Rod (H) using 2mm Allen Wrench (T-A). Retighten knob.
Place Anti-
Vibration Pads (K), as shown below. 
STEP 5
Place the frame assembly upside down on the desktop in the desired location.
Use a 3/32” (3mm) drill bit and drill holes to a depth of 3/8” (10mm), if
needed. Secure the frame and Control Panel (I) to the desktop using M5x16mm
Screws (S-B) and a Phillips screwdriver.
STEP 6
Connect cable from Motorized Leg (A) and Power Cable (J) to Control Panel (I).
Install Cable Clips (L) to the underside of the desktop for cable management.
CAUTION!
| Do not exceed desk weight limit.
---|---
| Keep area of vertical
motion free of obstacles.
| Keep weight on desk
balanced for correct operation and longer life of components.
| Leave enough slack in
cables to allow for full range of vertical motion.
Failure to follow these instructions may result in property damage and/or
personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 9/14/2022
REV2V
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): 5M 4S
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Compact Electric Single Motor Desk Frame with Memory Controller – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>