V I V O DESK-V000K K Series Standing Desk Converter Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
Desk Riser
Instruction Manual
SKU: DESK-V000K/KA/KF/KG/KN/KO/KR/KWhttps://vivo-us.com/products/desk- v000k
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. https://vivo-us.com/products
/desk-v000k
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: PINCH POINT
DO NOT place hands on or near support bars.
Moving parts can crush and cut. Pinch points are created during lifting and
lowering the work surface. Failure to follow these instructions may result in
serious personal injury.
ASSEMBLY STEPS
STEP 1
Apply Pads (D) to underside of Keyboard Tray (B). Assemble Stopper (C) to
Keyboard Tray (B) using ST4.2x12mm Screws (S-A) and a Phillips screwdriver.
STEP 2
Install Rubber Feet (E) to the bottom of Desk (A). Then cut the large shipping
tie.
NOTE: DO NOT squeeze the handle on Desk (A) while cutting the shipping tie.
STEP 3
Raise Desk (A) by lifting the handle on the right side of the frame.
STEP 4
Place Keyboard Tray (B) on the metal brackets on Desk (A). Secure Keyboard
Tray (B) to brackets using M5x10mm Screws (S-B) and tighten with a Phillips
screwdriver.
STEP 5
Apply Cable Clips (F) to underside of Desk (A).
STEP 6
If installing a monitor mount, remove the plug from the desktop, then secure
the mount using grommet mounting hardware included with your monitor mount.
CAUTION!
Keep monitor and laptop base fully on the desktop.| Follow the cable routing instructions to avoid the potential to pinch cables.| Leave enough slack in cable to allow for full range of vertical motion (15” / 38 cm).| Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
| 309-278-5303 | AVG. RESOLUTION TIME (within office hrs): 5M 4S |
|---|
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
****help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:
www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- K Series Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>