RAIN HARVESTING RC4 MGTG1RC4 Tank Gauge Plus Installation Guide
- June 3, 2024
- Rain Harvesting
Table of Contents
Tank Gauge Plus
Powered by Sigfox
Installation and Specification Guide
PRODUCT DETAILS
Monitor your rainwater level, inflows and usage from the top of your tank or
your mobile device with this smart tank gauge.
MGTG1RC4 Tank Gauge Plus powered by Sigfox RC4
MGTG1RC1 Tank Gauge Plus powered by Sigfox RC1
MGTG1RC2 Tank Gauge Plus powered by Sigfox RC2*
FEATURES AND BENEFITS
- Monitor your tank levels locally via Bluetooth, or remotely from almost anywhere on the Sigfox network.
- Reliable and accurate monitoring on any tank type up to 4 meters (13 feet) tall.
- Real time data available for one or multiple tanks through one app.
Installation
WHAT’S IN THE BOX
- Tank Gauge with attached float
- 4 screws
TOOLS/MATERIALS YOU MAY REQUIRE
- 2 x AA Batteries – Lithium (preferred) or Alkaline
- Marker pen
- Drill
- 38 mm to 44 mm (1½” to 1¾”) hole saw
- Phillips head screwdriver
SETUP AND INSTALLATION
Install the Rain Harvesting app
Download the Rain Harvesting by Blue Mountain Co app from the App Store or
Google Play.
Setup
- Remove the Rear Cover and Battery Cover from the gauge.
- Insert 2 x AA Batteries – Lithium (preferred) or Alkaline.
- Replace the Battery Cover and the Rear Cover, ensuring it is properly seated and sealed.
- Follow the instructions on the Rain Harvesting app to connect and calibrate your gauge.
Install the Tank Gauge Plus on your tank
During setup take care not to drop the Tank Gauge or Float onto the ground as
it may damage the measurement device within the unit.
-
Drill a 38mm – 44mm (1 ½” – 1 ¾”) hole in the top of the tank. Select a location where the gauge will be easily viewable, and the center should at least 150mm / 6” from the tank wall.
-
Twist off the Mounting Plate from the Tank Gauge.
-
Position the Mounting Plate in the hole. The Rain Harvesting logo and small arrow will face the same way as the dial once it is installed.
TIP! The small arrows on the mounting plate indicate which way the gauge can face when installed. -
Screw the mounting plate to the top of the tank.
-
Holding the gauge, rotate the Empty Indicator to the tank height shown on the front label.
-
Gently lower the Float through the hole into the tank, until it rests on the water’s surface.
-
Insert the Tank Gauge into the mounting plate and twist it into position.
MAINTENANCE
Periodically you will need to replace the 2 x AA batteries (lithium or
alkaline). Lithium batteries will give the best performance.
To check if batteries need replacing, remove the rear cover and press the
button. If the light does not blink, replace the batteries.
If required, replace the batteries and then follow the instructions in the App
to recalibrate the gauge.
Replace the rear cover, ensuring it is properly seated and sealed.
If required, wipe the gauge clean with a damp cloth. Do not use any cleaning
products.
WARNINGS
- Only use AA Lithium or Alkaline batteries and ensure the batteries are inserted correctly (do not reverse polarity).
- Do not mix old and new batteries, or different types of battery.
- Do not expose the batteries to excessive heat or fire.
- Remove batteries if they are flat or if the unit will not be used for a long time.
PRODUCT DIMENSIONS
ALL DIMENSIONS IN MM UNLESS OTHERWISE STATED.
PRODUCT SPECIFICATIONS AND COMPLIANCE
Local Connectivity
| Bluetooth For on demand tank level monitoring, you can connect to the Tank
Gauge Plus via Bluetooth using the Rain Harvesting app.
---|---
Remote Connectivity
| Sigfox* IoT network Tank Gauge Plus can continuously send data to the cloud
via the Sigfox network so you
can manage and monitor your tank levels at any time using the Rain Harvesting
app.
| Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: ( 1 ) This device may
not cause harmful interference, and ( 2 ) This device must accept any
interference received, including interference that may
cause undesired operation. (Only applicable for model MGTG1RC2)
| RCM
| CE marking is a key indicator of a product’s compliance with EU
legislation and enables the free movement of products within the European
market.
RoHS
| The Waste Electrical and Electronic Equipment Directive (WEEE
Directive) is the European Community directive 2002/96/EC on waste electrical
and electronic equipment (WEEE) which, together with the RoHS Directive
2002/95/EC, became European Law in February 2003. The WEEE Directive set
collection, recycling and recovery targets for all types of electrical goods,
with a minimum rate of 4 kilograms per head of population per annum recovered
for recycling by 2009. The RoHS Directive set restrictions upon uropean
manufacturers as to the material content of new electronic equipment placed on
the market.
WARRANTY INFORMATION
Rain Harvesting Pty Ltd guarantees this product for 12 months from date of
purchase. Under this warranty we will replace the product or repair it free of
charge. Claims must be received by Rain Harvesting Pty Ltd at the address
below within 12 months of the date of purchase.
The benefits conferred by this warranty are in addition to all other rights
and remedies available in law in respect to the goods and services to which it
relates.
Our goods come with guarantees that can not be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonable foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
* What does RC1, RC2 & RC4 mean
There are different hardware versions of the Tank Gauge Plus for use in
different geographic zones where the Sigfox network operates. For example, RC4
(Radio Configuration 4) is for use in Australia, New Zealand and parts of Asia
Pacific as well as Latin America. The Sigfox network is constantly expanding
so refer to our website to check which version of the Tank Gauge Plus is
suitable for your location.
The Bluetooth word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. App Store® and the App Store® logo are trademarks of Apple
Inc., registered in the U.S. and other countries. Google Play and the Google
Play logo are trademarks of Google LLC.
DISCLAIMER This product specification is not a complete guide to product
usage.
Further information is available from Rain Harvesting Pty Ltd and from the
Installation and Operating Instructions. This specification sheet must be read
in conjunction with the Installation and Operating Instructions and all
applicable statutory requirement. Product specifications may change without
notice. © Rain Harvesting Pty Ltd.
+61 (0)7 3248 9600
rainharvesting.com.au
Documents / Resources
| RAIN
HARVESTING RC4 MGTG1RC4 Tank Gauge
Plus
[pdf] Installation Guide
RC4 MGTG1RC4 Tank Gauge Plus, RC4 MGTG1RC4, Tank Gauge Plus, Gauge Plus, Plus
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>