RAIN HARVESTING TSEF37 Easy Fit Side Mesh Tank Screen with Screw Down Ring Installation Guide

RAIN HARVESTING TSEF37 Easy Fit Side Mesh Tank Screen with Screw Down

Ring

Product Information

Easy Fit Side Mesh Tank Screen w/ Screw Down Ring

The Easy Fit Side Mesh Tank Screen is a tank screen system that is suitable for any tank type. It has a screw-down ring for easy installation and maintenance. The tank screen incorporates mesh on the side walls, which allows large volumes of water to flow through, even as debris loads increase. The modular system allows other components to be easily clipped into position to further boost your tank’s performance. Add on covers, or solar shields to protect your water further. The product code for this tank screen is TSEF37 and it comes in a size of 400mm. It is available globally.

Product Specifications

• Code: TSEF37
• Country: Global
• Dimensions & Pipe Fittings:
  • Tank Hole Size (A): 358-382 mm
  • B: 420 mm
  • C: 17 mm
  • D: 14.09-15.04 mm
  • C: 16.5 mm
  • D: 0.7 mm

Product Usage Instructions

Product What’s in the Box?

• Easy Fit Side Mesh Tank Screen
• Easy Fit Screw Down Inlet Ring

Tools/Materials You May Require

• Drill Screws

Product Installation

1. Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is appropriate for your tank material.
2. To secure your Easy Fit Side Mesh Tank Screen, place it over the ring so that the 3 clips on the Easy Fit Side Mesh Tank Screen align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear them click into place. Ensure all 3 clips are secured.
3. Install your inlet pipes as close to the bottom screen as possible, whilst still allowing space for debris clearance and removal of the Easy Fit Side Mesh Tank Screen for maintenance.
4. To remove your Easy Fit Side Mesh Tank Screen, lift each of the release tabs until they disengage, and the screen can be lifted off.

Product Maintenance

You should regularly inspect your Easy Fit Side Mesh Tank Screen and remove any leaves or debris. For a more thorough clean, simply unclip your Easy Fit Side Mesh Tank Screen and hose it off before reattaching to your tank.

For more information or assistance, contact us at +61 7 3248 9600 or visit our website at rainharvesting.com.

PRODUCT DETAILS

Suitable for any tank type, this tank screen system requires no tools for maintenance. It means you can easily remove and clean your tank screen to keep it clean and functioning smoothly. The Tank Screen incorporates mesh on the side walls, which allows huge volumes of water to flow through, even as debris loads increase. The modular system allows other components to be easily clipped into position to further boost your tank’s performance. Add on covers, or solar shields to protect your water further.

Code Size Country

• TSEF37 400mm Global

Installation

WHAT’S IN THE BOX?

• Easy Fit Side Mesh Tank Screen
• Easy Fit Screw Down Inlet Ring

TOOLS/MATERIALS YOU MAY REQUIRE

• Drill
• Screws

INSTALLATION

1. Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is appropriate for your tank material.
2. To secure your Easy Fit Side Mesh Tank Screen, place it over the ring so that the 3 clips on the Easy Fit Side Mesh Tank Screen align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear them click into place. Ensure all 3 clips are secured.
3. Install your inlet pipes as close to the bottom screen as possible, whilst still allowing space for debris clearance and removal of the Easy Fit Side Mesh Tank Screen for maintenance.
4. To remove your Easy Fit Side Mesh Tank Screen, lift each of the release tabs until they disengage, and the screen can be lifted off.

Product Specifications

• Easy Fit Side Mesh Tank Screen w/ Screw Down Ring

• Dimensions & Pipe Fittings

• All dimensions are in mm unless otherwise stated.

Maintenance

You should regularly inspect your Easy Fit Side Mesh Tank Screen and remove any leaves or debris. For a more thorough clean, simply unclip your Easy Fit Side Mesh Tank Screen and hose it off before reattaching to your tank. Let me know if you have any questions.

supported
A common misconception about collecting rainwater is that all you need is a roof, a tank, and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help. With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or want to keep the garden green, our simple steps will help you achieve your goal. The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.

How can we help you?

DISCLAIMER

This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating
Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirements. Product specifications may change without notice. © Rain Harvesting Pty Ltd rainharvesting.com

• For more information or to find out
• how we can help, just give us a call on +61 7 3248 9600
• Or visit our website at  rainharvesting.com

References

• Cleaner Water. More of it. | Rain Harvesting by BMCo US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>