RAIN HARVESTING GSGO01 Gutter Outlets Round Installation Guide
- June 9, 2024
- Rain Harvesting
Table of Contents
Gutter Outlets
Round
Installation and Specification Guide
PRODUCT DETAILS
Our easy-install, below-the-gutter outlets improve water flow and extend the
life of your gutters. By reducing snags and water pooling around your outlets,
they reduce opportunities for mosquitoes to breed and decelerate water-
related gutter corrosion.
The round versions are suitable for flat bottom gutters with round downpipes.
| Code | Size | Country |
|---|---|---|
| GSGO01 | 75mm | |
| GSGO03 | 90mm | Australia |
| GSGO04 | 90mm | |
| GSGO09 | 100mm | |
| GSGO03 | 90mm | New Zealand |
| GSGO09 | 110mm | Europe |
| GSGO09 | 110mm | UK |
Installation
WHAT’S IN THE BOX?
- Gutter Outlet
TOOLS/MATERIALS YOU MAY REQUIRE
- Marker pen
- Tin snips
- Silicone
- Screw or rivet
- Screwdriver or rivet gun
- Drill
- Masking tape
GUTTER OUTLET
- For new installations, use the inside of your Gutter Outlet as a template to mark the size of the hole you need to cut in the underside of your gutter.
- If replacing an existing gutter outlet, remove the existing outlet and check the size of the hole in the underside of your gutter. If necessary, use the inside of your Gutter Outlet as a template to mark the new hole you need to cut.
- Cut the hole for your new gutter outlet using snips or an appropriate tool.
- Clean the underside of your gutter around the hole.
- Apply silicone into the groove located on the gutter outlet flange and push the gutter outlet up onto the underside of your gutter.
- Use a screw or rivet to secure your gutter outlet in place.
- You can now attach or re-attach your downpipe to the gutter outlet (note: if using tape to temporarily secure your gutter outlet, take care not to disturb the bond until sealant dries).
Product Specifications
| Country | Code | A | B | C | D |
|---|---|---|---|---|---|
| Australia | GSG001 | 75 M | 85 | 96 | 41 |
| GSG003 | 90 F | 95 | 113 | 42 | |
| GSG004 | 90 M | 91 | 147 | 60 | |
| GSG009 | 100 M | 115 | 130 | 58 | |
| New Zealand | GSG003 | 90 F | 95 | 113 | 42 |
| Europe & UK | GSG009 | 110 M | 115 | 130 | 58 |
All dimensions are in mm unless otherwise stated.
Fitting guide:
F = Female / Socket Fitting
M = Male / Spigot Fitting (Pipe size)
IP = In-Pipe Fitting
Maintenance
When properly installed, your gutter outlet should be maintenance-free.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or
wanting to keep the garden green, our simple steps will help you achieve your
goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
COMPLIANCE
- Australian Standard AS/NZS 4020:2005 (Testing of products for use in contact with drinking water)
DISCLAIMER This product specification is not a complete guide to product
usage. Further information is available from Rain Harvesting Pty Ltd and from
the installation and Operating instructions. This specification sheet must be
read in conjunction with the installation and Operating Instructions and all
applicable statutory requirement. Product specifications may change without
notice. © Rain Harvesting Pty Ltd
rainharvesting.com
For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>