Rain Harvesting TATO31 Flanged Tank Overflow Kit High Volume Installation Guide
- June 9, 2024
- Rain Harvesting
Table of Contents
Rain Harvesting TATO31 Flanged Tank Overflow Kit High Volume
PRODUCT DETAILS
Code Size Country
- TAT031 90mm Australia
An all-inclusive overflow solution for your tank to keep out pests and increase your tank’s capacity. The high-level bend on the inside of this overflow raises the overflow level of your tank, which instantly increases the volume of water you can store. It’s the quickest way to boost your storage capacity. The easily-maintained, mosquito-proof screen keeps pests at bay and protects your tank.
Installation
WHAT’S IN THE BOX?
- Tank Overflow High
- Mazzie Stoppa Easy Clean
- Rubber gasket
- 6 Stainless Steel screws
TOOLS/MATERIALS YOU MAY REQUIRE
- Marker pen
- Holesaw
- Drill
- Screwdriver
- Sealant
- Solvent Weld glue
TANK OVERFLOW KIT HIGH WITH MOZZIE STOPPA HINGED
- If you do not have an existing tank overflow hole in your tank, use your tank overflow outlet as a template to mark the size of the hole you need to cut in the side of your tank, then cut using a hole saw. Position the hole so that when you install your tank overflow outlet, the top of the outlet will sit lower than the bottom of the tank inlet and/or tank inlet screen.
- Ensure that the gasket is fitted firmly around the tank overflow fitting, then push it in place inside the tank overflow hole, oriented so that the bend faces up.
- If you have an existing tank overflow hole and doing this means the open end of the bend will sit above the level of the tank inlet and/or tank inlet screen, orient the bend diagonally or trim the top of the overflow first.
- Hold the overflow outlet as you screw it in place, applying equal force to each screw. We recommend alternating between each screw, screwing on opposite sides, and avoiding fully tightening the screws until the end. Be sure not to overtighten the gasket.
- Position your Mazzie Stoppa Hinged, so the screen is facing upward, then use solvent weld glue to install into your overflow outlet.
Product Specifications
Fitting guide
- F = Female/ Socket Fitting
- M = Male/ Spigot Fitting (Pipe size)
- IP = In-Pipe Fitting
Maintenance
We recommend regularly cleaning your Mozzie Stoppa to prevent the mosquito- proof screen from becoming clogged or blocked with sediments and debris.
Mozzie Stoppa Hinged
Your Mozzie Stoppa Hinged is designed to make maintenance and cleaning easy.
To clean, simply unlatch the hinged screen and hose or brush it off. Replace
the screen immediately after cleaning by pressing it down to firmly relatch it
in place so it continues to form a barrier against mosquitoes, frogs and other
pests.
supported
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help. With some thought, your rain harvesting system can provide you
with cleaner water and lots of it. Whether you’re completely reliant on tank
water or wanting to keep the garden green, our simple steps will help you
achieve your goal. The Rain Harvesting approach to rainwater collection
involves using tested and proven products to make quality rainwater available
for use in and around your property. You don’t need much to get started and
you will be surprised how easy it is to get the most out of your rainwater
system.
DISCLAIMER
This product specification is not a complete guide to product usage. Further
information is available from Rain Harvesting Pty Ltd and from the Insta ll
ation and Operating
Instructions. This specification sheet must be read in conjunction with the
Installation and Operating Instructions and all applicable statutory
requirement. Product specifications may change without notice.© Rain
Harvesting Pty Ltd
RAIN HARVESTING by Blue Mountain Co For more information or to find out how we can help, just give us a call on +61 7 3248 9600 Or visit our website at rainharvesting.com