RAIN HARVESTING TSEF25 Low Profile Tank Screen 360 Kit with Screw Down Ring Installation Guide
- June 9, 2024
- Rain Harvesting
Table of Contents
Low Profile Tank Screen
360 Kit
w8Screw Down Ring
Installation and Specification Guide
PRODUCT DETAILS
Never lose another drop of rain again with the Low Profile Tank Screen 360. It
keeps out leaves and pests while allowing huge amounts of water into your
tank.
The Low Profile design keeps any inbound pipes close to the top of your tank.
| Code | Size | Country |
|---|---|---|
| TSEF25 | 400mm | Global |
Installation
| WHAT’S IN THE BOX? | TOOLS/MATERIALS YOU MAY REQUIRE |
|---|
• Low Profile Tank Screen 360
• Easy Fit Screw Down Inlet Ring| • Drill
• Screws
HOW IT WORKS
The Tank Screen 360 is a high flow inlet solution for rainwater tanks. Its
unique design keeps out sunlight, pests, and debris and offers simple
maintenance.
Figure 1
-
Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is appropriate for your tank material.
-
To secure your Low Profile Tank Screen 360, place it over the ring so that the 3 clips on the Tank
Screen 360 align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear them click into place. Ensure all 3 clips are secured. -
Install your inlet pipes as close to the bottom screen as possible, whilst still allowing space for debris clearance and removal of the Tank Screen 360 for maintenance (Figure 1).
-
To remove your Tank Screen 360, lift each of the release tabs until they disengage, and the screen can be lifted off.
Product Specifications
Low Profile Tank Screen 360 Kit
w/Screw Down Ring
| COUNTRY | CODE | TANK HOLE SIZE | A | B | C | D |
|---|---|---|---|---|---|---|
| Global | TSEF25 | 348-382 | 420 | 43 | 100 | 346 |
| 13.7″-15.04″ | 16.5″ | 1.7″ | 3.9″ | 13.62″ |
Maintenance
You should regularly inspect your Low Profile Tank Screen 360 and remove any leaves or debris. For a more thorough clean, simply unclip your Low Profile Tank Screen 360 and hose it off before reattaching to your tank.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or
wanting to keep the garden green, our simple steps will help you achieve your
goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at rainharvesting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>