Sunbeam 32610003 Steam Iron Instruction Manual
- August 16, 2024
- Sunbeam
Table of Contents
Sunbeam 32610003 Steam Iron
Specifications
- Manufacturer : Sunbeam Products, Inc.
- Distributor : Star Elite Inc., Montreal, Canada H3B 3X9
- Model Number: SE010-011224
- Website: www.sunbeamhome.com
Product Usage Instructions
Before First Use
- Turn off the Iron and disconnect the plug from the electrical wall outlet before filling the Iron with water.
- Turn the Steam Select Switch to the closed position.
- Set the Iron in the position indicated below (figure 2) and fill it with water, no higher than the Max fill level shown on the See-Through Water Window.
Dry Ironing
- Insert the plug in the electrical wall socket.
- Make sure that the Steam Select Switch is in the closed position.
- You may start to iron in approximately 2 minutes.
Steam Ironing
Steam ironing is only possible at high temperatures (silk, wool, cotton, linen), as indicated on the Temperature Control Dial (figure 3).
- Be sure that there is enough water in the Reservoir.
- Set the iron in an upright position.
- Plug the steam Iron into the wall electrical outlet.
- Turn the Temperature Control Dial to the desired position within the range of temperatures included in the steam area of the dial.
- Allow the iron to heat in approximately 2 minutes.
- Set the Steam Select Switch to the desired steam level position. You are now ready to start steam ironing. The steam will be released evenly through vents located in the soleplate for easier ironing.
Spray Mist
The Spray Mist feature is a powerful water spray mist that dampens the fabric to help remove wrinkles from heavy fabrics and set creases.
- Press the Spray Mist button firmly to start the spray as you move the iron across the wrinkled area.
FAQ
- Q : Can I use an extension cord with the steam iron?
- A : If an extension cord is necessary, ensure it has an ampere rating equal to or greater than the maximum rating of the iron to avoid fire or electric shock risks.
- Q: How do I prevent slipping when filling the water tank?
- A: Watch for water drips and spills on the floor when filling the water tank to avoid slipping and falling incidents.
- Q: Can I steam garments while wearing them?
- A: No, do not steam garments while wearing them to prevent injuries.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety instructions should always be followed, including the following:
-
Use the appliance only for its intended use.
-
To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
-
Always turn the appliance to “Off” before plugging or unplugging the appliance from the electrical outlet. Never yank the cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
-
Do not allow the cord to touch hot surfaces. Let the appliance cool completely before putting it away. Loop the cord loosely around the appliance when storing.
-
Make sure the unit is off and unplugged, and allow it to cool completely before filling or cleaning.
-
Always disconnect the appliance from the electrical outlet when filling with water or emptying, and when not in use.
-
Do not operate the appliance with a damaged cord, or if the appliance has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance, take it to a qualified service center for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Burns could occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam appliance upside down – there may be hot water in the reservoir.
-
To reduce the risk of contact with hot water emitting from steam vents, check the appliance before each use by holding it away from the body and operating the steam button.
-
To reduce the likelihood of circuit overload, do not operate another high wattage appliance from the same outlet.
SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY -
If an extension cord is necessary, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.
-
When filling the water tank, watch for water that can drip onto the floor and cause you to slip and fall.
-
The appliance may cause personal injury or be damaged if dropped.
-
The use of attachments not recommended or sold by the appliance manufacturer may cause injuries or void your warranty.
-
To avoid personal injury and damage to the appliance, only add water to the water tank. NEVER add cleaning solutions, perfumes, oils or any other chemical additives.
-
Care should be taken when using the appliance due to the emission of steam.
-
Do not set the iron on an unprotected surface, even if it is on the heel rest.
-
The iron must not be left unattended while it is connected to the supply mains.
-
The plug must be removed from the socket outlet before the water reservoir is filled with water.
-
The filling aperture must not be opened during use. Instructions for the safe refilling of the water reservoir must be followed.
-
The iron must be used and rested on a stable surface.
-
When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
-
The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
-
If the iron is not operating normally, disconnect from the power supply and have the iron serviced by an authorized service center.
DESCRIPTION OF THE APPLIANCE
- Soleplate
- Spray Nozzle
- Water Reservoir Lid
- Steam Select Lever
- Shot of Steam Button
- 360º Swivel Cord
- Handle
- Wide Heel Rest
- ON/OFF Indicator Light
- Spray Trigger
- Temperature Control Dial
- See-Through Water Reservoir
BEFORE FIRST USE
- When using the Iron for the first time, test it on a piece of old cloth to be sure that the Soleplate and the Water reservoir are clean.
- The Iron may discharge some smoke or give off a slight odor dturing it is the first used. This is due to the initial heating of the materials used. This is completely normal and will stop shortly afterward.
- When not ironing, always have the Steam Select Switch turned to the close position .
INSTRUCTIONS FOR USE
CHOOSING THE RIGHT WATER
- This Steam iron may be used by normal tap water. However, if the water if the region in which you live is especially hard, it is recommended to use distilled water to prolong the life of your iron.
- Do not use water that has been desalinated with chemicals.
- Turn off the Iron and disconnect the plug from the electrical wall outlet before filling the Iron with water.
- Turn the Steam Select Switch to the closed position.
- Set the Iron in the position indicated below (figure 2) and fill it with water, no higher than the Max fill level shown on the See-Through Water Window.
DRY IRONING
- Insert the plug in the electrical wall socket.
- Make sure that the Steam Select Switch is in the closed position.
- You may start to iron in the app
STEAM IRONING
Steam ironing is only possible at high temperatures (silk, wool, cotton, linen), as indicated on the Temperature Control Dial (figure 3).
- Be sure that there is enough water in the Reservoir.
- Set the iron in an upright position.
- Plug the steam Iron into the wall electrical outlet.
- Turn the Temperature Control Dial to the desired position within the range of temperatures included in the steam area of the dial.
- Allow the iron to heat in approximately 2 minutes.
- Set the Steam Select Switch to the desired steam level position.
You are now ready to start steam ironing. The steam will be released evenly through vents located in the soleplate for easier ironing.
SPRAY MIST
The Spray Mist feature is a powerful water spray mist that dampens the fabric to help remove wrinkles from heavy fabrics and to set creases.
- Press the Spray Mist button firmly to start the spray.
SHOT OF STEAM®
The Shot of Steam® feature provides an extra burst of steam for deep penetration of stubborn wrinkles. The Shot of Steam® feature can be used with dry or steam ironing provided it has at least a ¼ tank of water and the Temperature Control Dial is set within the steam band.
-
Allow the iron to heat for approximately two minutes.
-
Press the Shot of Steam® Button several times to prime the pump.
-
Press the Shot of Steam® Button another three to four times to clean the unit.
-
The Shot of Steam® feature is now ready for use. The Shot of Steam® feature can be used continuously with just a short pause between shots.
The Shot of Steam® feature is most effective with the Iron held in a horizontal position on the fabric being ironed. -
If the Water Reservoir runs dry, unplug the Iron and refill it with water.
The Iron may be filled with water while it is hot. Note: It may be necessary to re-prime the pump before using the Shot of Steam® feature again.
VERTICAL SHOT OF STEAM®
The vertical Shot of Steam® feature allows your iron to function as a garment
steamer.
Tip: When using the vertical Shot of Steam® on clothing, hang the
clothing on the clothes hanger for best results. Hanging curtains and drapes
may also be steamed.
HOW TO USE VERTICAL STEAM
- Allow the iron to warm up.
- Hold the iron in a vertical position, with the iron close to but not touching the fabric you want to steam.
- With your other hand, pull the fabric tight.
- Press the Shot of Steam® button in approximately 3-second intervals as you move the iron across the wrinkled area.
WARNING: To prevent the risk of burns, keep your hand away from the area
being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in
injuries.
IRONING TEMPERATURE
- Check the ironing instructions on the label of the items that you wish to iron. Check the temperature setting table for further instructions.
- Should the specific toning instructions not appear on the label, follow the instructions on the temperature setting table. This table is only for fabrics indicated and does not apply to special textiles with a gloss finish, etc. Textiles with special coatings (such as gloss, relief wrinkles, etc.) are best ironed at very low temperatures. If the textile consists of several different types of fibers, always select the lowest temperature, i.e the temperature recommended for the most delicate fiber in the composition (for example, if the composition consists of 60% polyester and 40% cotton, you should iron at the temperature indicated for polyester).
SETTING THE TEMPERATURE
- Set the iron in on upright position.
- Connect the Iron to an electrical wall socket.
- Set the Temperature Control dial (Figure 4) to the correct ironing temperature as indicated on the label or the temperature settings table.
TEMPERATURE SETTINGS TABLE
ANTI-CALC
- The Anti Calc feature helps prevent the build up of mineral deposits in your iron. This prolongs its life and improves the iron’s performance.
AUTO-OFF
- Auto-Off Feature when the iron is plugged in, the ON/OFF indicator light will be red, indicating that there is power to the iron. If you leave the iron:
- in a horizontal position without moving it, or accidentally tipping the iron over, it will automatically stop heating after 30 seconds. The wait/ready light will blink red to let you know that the iron has stopped heating.
- in a vertical position (on its heel rest) without moving it, the iron will automatically turn off after 15 minutes. The wait/ready light will blink red to let you know that the iron has stopped heating.
- IMPORTANT: The wait/ready light will continue to blink red until the iron is unplugged or reset. To reset the iron: Move the iron back and forth to reset. The wait/ready light will change from blinking red to solid red and the iron will start heating again.
- WARNING: Auto-Off is a safety feature, not a recommended means for turning your iron off. See “STORING THE IRON” for information on turning off your iron and storing it safely between use.
MAINTENANCE AND CLEANING
- Before cleaning the Iron, always make sure that it is disconnected from the electrical wall socket and is completely cool.
SOLEPLATE
- The residue on the Soleplate can be wiped off with a cloth soaked in a solution of water and vinegar.
- Do not use scouring pads, abrasives or chemical cleaning solvents as they may damage the finish.
HOUSING
- The housing can be cleaned with a moist cloth and then wiped dry.
- Other than the recommended cleaning, no further user maintenance should be necessary. If for any reason your Steam Iron should require repairs, do not try to fix it yourself.
STORING THE IRON
- Turn off the iron and disconnect the plug from the electrical wall socket.
- Set the Iron in an upright position and let it cool down completely.
- Set the Steam Select Switch to the closed position .
- Empty out all the water remaining in the Water Reservoir by opening the Water Reservoir Lid and inverting the Iron over the sink.
- The Power Cord can be wound around the Heel Rest for easier and tidy storage once the unit has cooled down. The Iron should always be stored in an upright position.
WARRANTY
3-YEAR LIMITED WARRANTY
- This device has a 3-year limited warranty for the original purchaser from the date of purchase against workmanship and defects in material.
- If under normal use, your product fails to operate, a replacement or refund will be provided to you with proof of purchase.
- Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.
Questions?
- www.sunbeamhome.com
- info@sunbeamhome.com
- 1-877-383-6399
- (8:30 a.m. – 5:00 p.m EST) Monday – Friday
© 2024 Sunbeam Products, Inc. All rights reserved. SUNBEAM® is a registered trademark of Sunbeam Products, Inc. used under license. Distributed by Star Elite Inc., Montreal, Canada H3B 3X9. SE010-011224
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>