Sunbeam EMM7200 Coffee Handle Instructions

: October 30, 2023
: Sunbeam

Table of Contents

EMM7200 Coffee Handle
Product Information
Exploded Diagram
Part Description

EMM7200 Coffee Handle

Product Information

The EMM7200 is a coffee machine that comes with various parts
such as the coffee handle, drip tray assembly, steam regulator
brass, control knobs, top cover assembly, water tank, steam thermo
block, and main PCB.

Exploded Diagram

The parts of the EMM7200 are identified in the exploded diagram
with their respective part numbers for easy identification and
replacement.

Part Description

EMM7200 COFFEE HANDLE: This is the handle for
the coffee filter basket.
EMM7200 DRIP TRAY ASSEMBLY: This is the tray
that holds the coffee cups and catches any drips or spills.
STEAM REGULATOR BRASS: This is a brass
component that regulates the steam pressure for frothing milk.
EMM7200/7000/7100 CONTROL KNOB: This is a knob
used to control various functions of the coffee machine such as
brewing, steaming, and hot water dispensing.
EMM7200 TOP COVER ASSEMBLY: This is the top
cover of the coffee machine that houses various components such as
the control panel and water tank.
EMM7200 CONTROL KNOB INNER: This is an inner
component of the control knob that helps to adjust the
settings.
EMM7200 CONTROL KNOB SPRING: This is a spring
that provides tension to the control knob.
EMM7200 WATER TANK: This is the container that
holds the water for brewing and steaming.
EMM7200 STEAM THERMOBLOCK TO STEAM REGUL (teflon
tube): This is a teflon tube that connects the steam
thermo block to the steam regulator brass.
MAIN PCB EMM7200/EM7000: This is the main
printed circuit board that controls the functions of the coffee
machine.

Product Usage Instructions

Ensure that the coffee machine is unplugged and cooled down
before handling any parts or components.
To make coffee, fill the water tank with fresh water and insert
the coffee handle with the desired amount of coffee grounds. Place
a cup on the drip tray assembly and press the brewing button on the
control knob.
To steam milk, fill the water tank and turn the steam regulator
brass to release steam. Insert the steam wand into a pitcher of
milk and froth as desired.
To dispense hot water, fill the water tank and turn the control
knob to the hot water function. Place a cup under the steam wand
and dispense hot water as needed.
If any parts need to be replaced, refer to the exploded diagram
and part description to identify the correct part number and
replacement procedure.

EMM7200

EXPLODED DIAGRAM #
24 53 Not shown Not shown 11 Not shown Not shown 2 Not shown 47

PART #
2183344 2183345 2183346 2183347 2183349 2183350 2183351 2183352 2183353 2183354

PART DESCRIPTION
EMM7200 COFFEE HANDLE EMM7200 DRIP TRAY ASSEMBLY STEAM REGULATOR BRASS EMM7200/7000/7100 CONTROL KNOB EMM7200/EM7000/EM7100 EMM7200 TOP COVER ASSEMBLY EMM7200 CONTROL KNOB INNER EMM7200 CONTROL KNOB SPRING EMM7200 WATER TANK EMM7200 STEAM THERMOBLOCK TO STEAM REGUL (teflon tube) MAIN PCB EMM7200/EM7000