Sunbeam 2163599 AdvancedHeat King Sized Heating Pad Instructions
- May 15, 2024
- Sunbeam
Table of Contents
2163599 AdvancedHeat
King Sized Heating Pad
Instructions
IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTROY
DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE, AND PERSONAL
INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING
INSTRUCTIONS:
- READ ALL INSTRUCTIONS.
- DO NOT USE WHILE SLEEPING.
- DO NOT USE ON AN INFANT OR ON AN ANIMAL.
- THIS PAD IS NOT TO BE USED ON OR BY AN INVALID, SLEEPING, HELPLESS OR UNCONSCIOUS PERSON, A PERSON WITH DIABETES, A PERSON WITH POOR BLOOD CIRCULATION OR INSENSITIVITY TO HEAT.
- THIS APPLIANCE IS NOT TO BE USED BY CHILDREN. CLOSE SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED NEAR CHILDREN. CHILDREN SHOULD NOT PLAY WITH THE APPLIANCE.
- DO NOT USE ON AREAS OF INSENSITIVE SKIN.
- BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING, CHECK SKIN UNDER PAD FREQUENTLY.
- IF PROVIDED WITH A REMOVABLE COVER, NEVER USE PAD WITHOUT COVER IN PLACE.
- DO NOT USE IN AN OXYGEN ATMOSPHERE.
- DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS PAD IN PLACE.
- DO NOT SIT ON, AGAINST, OR CRUSH PAD – AVOID SHARP FOLDS. PLACE PAD ON TOP OF AND NOT UNDER THE PART OF BODY NEEDING HEAT.
- UNPLUG WHEN NOT IN USE. NEVER LEAVE APPLIANCE UNATTENDED, ESPECIALLY IF CHILDREN ARE PRESENT.
- NEVER PULL THIS PAD BY THE SUPPLY CORD. DO NOT USE THE CORD AS A HANDLE. DO NOT PINCH CORD.
- DO NOT TUCK IN, TRAP, FOLD, CROSS, PINCH OR WRAP CONTROL OR CORD WITH HEATING PAD DURING USE.
- CAREFULLY EXAMINE PAD, COVER, CORD AND CONTROLLER BEFORE EACH USE. DISCARD THE PAD IF ANY SIGN OF DETERIORATION, WEAR OR DAMAGE. DO NOT TAMPER WITH THIS PAD IN ANY WAY. THERE ARE NO USER SERVICEABLE PARTS. IF PAD DOES NOT FUNCTION SATISFACTORILY, SEE WARRANTY FOR CUSTOMER CONTACT INFORMATION.
- LOOP CORD LOOSELY WHEN STORING, TIGHT WRAPPING MAY DAMAGE CORD AND INTERNAL PARTS. ALLOW TO COOL BEFORE STORING AND DO NOT CREASE BY PLACING ITEMS ON TOP OF IT. STORE IN THE ORIGINAL PACKAGING, IN A COOL, DARK, DRY PLACE.
- USE ONLY WITH THE PROVIDED CONTROLLER.
- USE THIS PAD ONLY AT RATED VOLTAGE, AS MARKED ON THE PRODUCT. DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.
- DO NOT USE THIS PAD WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS. SKIN BURNS COULD RESULT.
- IF PAD IS PROVIDED WITH MAGNETIC CLOSURES: DO NOT USE IF YOU HAVE A PACEMAKER, ICD (IMPLANTABLE CARDIOVERTER DEFIBRILLATOR), INTERNAL INSULIN PUMP OR OTHER MEDICAL DEVICES SENSITIVE TO MAGNETS.
- THIS APPLIANCE IS NOT INTENDED FOR MEDICAL USE IN HOSPITALS.
- SOME MODELS MAY CONTAIN FILLING MATERIALS (PELLETS OR BEADS), MADE FROM EITHER ABS PLASTIC (NON-MICROWAVABLE MODELS) OR SILICON DIOXIDE (MICROWAVABLE MODELS). IF FILLING MATERIAL IS RELEASED DUE TO PRODUCT DAMAGE, DISCONTINUE USE OF PRODUCT. DO NOT INGEST FILLING MATERIAL. IF FILLING MATERIAL IS INGESTED, SEEK MEDICAL ATTENTION.
- SAVE THESE INSTRUCTIONS.
HOUSEHOLD USE ONLY
NORTH AMERICAN MODELS WITH POLARIZED PLUGS:
THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER).
TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO
INSTALL THE PROPER OUTLET.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY
WAY.
Sunbeam® provides a smarter approach to pain relief that leverages heat
therapy to treat pain, and accelerate tissue healing when used as a part of
your relief regimen. Heat therapy helps to relax tight muscles, ease
stiffness, facilitate stretching, and relieve common muscle and joint pain
associated with muscle tension and stress. Suggested treatment time for
application of heat is 20-30 minutes, up to three times a day, for persistent
pain that lasts longer than 48 hours, unless otherwise directed.
Note: Always consult with your physician or health professional for
recommended treatment of an injury or chronic muscle or joint pain.
HOW TO USE YOUR HEATING PAD OR HEAT WRAP
-
Make sure Control Connector is securely attached to the Pad Connector (Figure 2). Push both parts together for a tight fit.
NOTE: Control must be connected to heating pad before plugging unit into outlet. -
After control is connected to pad, plug into 120V AC electrical outlet.
-
To turn the pad ON press the Control/Power Button (Figure 1).
-
To select desired heat setting, continue pressing the Control Button, or for XpressHeat use the HEAT ▲ or HEAT ▼ heat setting buttons (Figure 1, Letter F).
-
Wait for the pad to heat up.
-
To turn the pad OFF, scroll through the remaining heat settings by pressing the Control Button sequentially until all heat indicator lights are turned off, or for XpressHeat® press the Power Button (Figure 1, Letter B).
CAUTION: Avoid sitting on or crushing pad. Avoid folding during use.
CONTROLLER FEATURES
AUTO-OFF FEATURE:
The Auto-Off feature is designed for convenience and to conserve energy by
automatically turning off after 2 hours of continuous use. Restart the unit by
powering On and selecting desired heat setting.
For XpressHeat®, Auto-Off is a selectable feature. By pressing the “Mode
”/”Auto-Off” button (Figure 1, Letter C), you can set the timer to “Stay On”
continuously, or to 2 hour Auto-Off to shut the pad down automatically after 2
hours of heat therapy. The Auto-Off Indicator (Figure 1, Letter D) will light
up to show selected mode.
NOTE: After a power outage, the Auto-Off feature automatically resets the
timer.
FOR MODELS WITH XPRESSHEAT®:
Your Sunbeam® XpressHeat® heating pad features a unique fast-heat
technology in which you will feel heat in 30 seconds – for faster pain relief!
The light ring around the controls, called the Heat Meter (Figure 1, Letter
E), will light up one side at a time, indicating progress as the pad heats up.
All four sides of the Heat Meter will light up within 30 seconds of powering
up, indicating the pad is warm and ready for use.
USING MOIST HEAT THERAPY
For deep, penetrating pain relief, use moist heat therapy. When using moist
heat therapy, you should protect furniture and clothing from becoming damp.
Dampen either side of the pad or wrap with water by patting the surface with a
wet sponge or cloth or use a spray bottle to apply a fine mist. Do not
thoroughly soak pad or wrap.
DANGER: DO NOT IMMERSE PAD OR WRAP IN WATER OR PLACE UNDER RUNNING WATER
TO DAMPEN SURFACE. FAILURE TO COMPLY MAY RESULT IN PERSONAL INJURY.
NOTICE: If your heating pad or heat wrap has a massage feature, do not
use moist heat therapy to prevent damage to the massagers.
AFTER USE
FOR MODELS WITH COMPACT STORAGE FEATURE:
- If model has an integrated pocket and securing tab, place the controller in the pocket, roll up pad, and secure with the tab for neat storage.
- If model has elastic straps, place controller and power cord on pad, roll up pad, and secure it in place with the straps for neat storage.
WASHING INSTRUCTIONS
CAUTION: DO NOT DRY CLEAN! DO NOT BLEACH! DO NOT USE WRINGER!
- Disconnect pad from outlet. DO NOT PULL BY THE CORD.
- Disconnect controller cord from pad by holding the pad side connector with one hand and pulling firmly on the cord side connector with the other hand.
- Machine wash pad in cold water on gentle cycle or hand wash. Tumble dry on low heat and remove promptly from dryer or drape to dry.
- DO NOT plug in pad and pad connector until completely dry.
TROUBLESHOOTING:
| Problem | Solutions |
|---|
• No heat
• No power, controller lights are Off| • Verify tight connection between pad
and controller.
• Verify tight connection between unit and wall outlet.
• Verify AC outlet is functional.
• Verify no physical damage to the cord, controller or pad.
• If failure continues, discontinue use. See warranty information to contact
Consumer Services.
• Pad has no heat and controller ‘Auto-Off’ light is flashing| • Auto-Off
feature is set to turn the unit off after 2 hours of continuous use.
NOTE: For XpressHeat® controller, this feature is optional and by
pressing the ‘Mode’ or ‘Auto-Off’ button on the controller, you can set the
timer to ‘Stay On’ continuously or to 2 hour Auto-Off.
• If needed, restart the unit by powering On and selecting desired heat
setting.
• Pad has a hot spot| • Make sure pad is not folded or bunched in any area.
• ‘High’ heating setting light is flashing
• ‘F’ is flashing on controller screen
- All models except AdvancedHeat heating pad| The ‘High’ heat setting indicator light or ‘F’ signal will start flashing when connection is broken between pad and controller while using the product.
• To reset, simply connect pad and controller together tightly and then power On and select the desired heat setting.
• If flashing light or ‘F’ signal persists, an error has occurred. Discontinue use of the product and see warranty information to contact Consumer Services.
LIMITED WARRANTY
Sunbeam Products, Inc. warrants for the time period set forth below*, from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Sunbeam dealers, service centers, or retail stores selling Sunbeam products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than Sunbeam or an authorized Sunbeam service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on Sunbeam’s Liability?
Sunbeam shall not be liable for any incidental or consequential damages caused
by the breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or
condition of merchantability or fitness for a particular purpose is limited in
duration to the duration of the above warranty.
Sunbeam disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A. – If you have any question regarding this warranty or would like
to obtain warranty service, please call
1-800-435-1250 and a convenient service
center address will be provided to you.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE
OF PURCHASE.
*AdvancedHeat heating pads feature 3-Year Limited Warranty; All Other heating pads feature 5-Year Limited Warranty.
FCC COMPLIANT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
© 2021 Sunbeam Products, Inc. All rights reserved. Distributed by Sunbeam
Products, Inc. 2381 NW Executive Center Drive, Boca Raton, Florida 33431.
Printed in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>